Lovato BFA03870400 start/delta starter 400 volts AC 30KW 60 Amps

Why Choose the BFA03870400?

The Lovato Completa star-delta starter BFA03870400 is an open frame assembly designed for dependable motor starting in industrial control panels. It supports a maximum IEC operating current of 60A and uses an AC contactor coil rated 400VAC 50/60Hz. Configured for controlled acceleration, it allows a starting time up to 12 seconds and a maximum of 30 operations per hour. Product type designation is BFA038 with a weight of 1900 g.

As a Lovato star-delta starter, the open frame design simplifies panel integration while meeting IEC/EN 60947-1 and IEC/EN 60947-4-9. It carries a UL/CSA horsepower rating of 50 HP at 480V and a Sustainability certification. Ideal for three-phase motors where reduced inrush is required, such as pumps, fans, compressors and conveyors, it offers reliable performance for routine duty cycles within the specified operating limits.

Key Benefits

• Controlled start with time up to 12 seconds.
• Supports up to 30 operations per hour for routine duty.
• Handles maximum IEC operating current of 60A.
• 400VAC 50/60Hz AC coil for straightforward control integration.
• Open frame format simplifies installation in control panels.
• UL/CSA horsepower rating 50 HP at 480V.
• Conforms to IEC/EN 60947-1 and 60947-4-9 standards.

Technical Specification

• Product type designation: BFA038
• Weight: 1900 g

What’s Included

• Lovato Completa star-delta starter (open frame)
• AC coil 400VAC 50/60Hz pre-fitted
• Manufacturer datasheet (downloadable)
• Basic installation and safety instructions

Applications

• Pumps and pump sets requiring reduced starting current
• Fans and blowers in HVAC and process systems
• Compressors and refrigeration plant motors
• Conveyors and material handling equipment
• General three-phase induction motors started via star-delta

Safety note: Install and commission only by qualified personnel. Isolate power before work, verify the 400VAC coil matches the control supply, and observe the 30 operations/hour and 12-second start-time limits per standards and instructions.