BF2510A12060 - 3P CONTACTOR +1NO 25A AC3 120V 60HZ

Why Choose the BF2510A12060?

Lovato’s BF2510A12060 three-pole contactor delivers reliable motor switching for AC-3 duties at 400 V up to 25 A, with a rugged AC coil rated 120 VAC 60 Hz. Built on the BF25 platform, it includes a built-in 1NO auxiliary contact and supports screw or 35 mm DIN rail mounting, streamlining panel integration while maintaining compact, serviceable connections.

Designed for demanding environments, the contactor offers Ui 690 V and Uimp 6 kV insulation strength, with Ith (AC-1) 32 A and a mechanical life of 20,000,000 cycles. It operates from −50 to 70 °C and up to 3000 m altitude. Conforms to IEC/EN/BS 60947-1 and 60947-4-1, UL 60947-1/-4-1, and CSA C22.2 n° 60947-1/-4-1, with 1.5–1.8 Nm terminal torque for secure wiring.

Key Benefits

• Rated 25 A AC-3 at 400 V for dependable motor switching.
• 32 A AC-1 Ith supports higher resistive load currents.
• 120 VAC 60 Hz coil for stable, predictable actuation.
• Integrated 1NO auxiliary contact reduces wiring and components.
• Screw or 35 mm DIN rail mounting speeds installation.
• Ui 690 V and Uimp 6 kV deliver robust insulation.
• Operates −50 to 70 °C; 20,000,000 cycles mechanical life.

Technical Specification

• Product type designation: BF25
• Number of poles: 3
• Rated insulation voltage Ui (IEC/EN): 690 V
• Rated impulse withstand voltage Uimp: 6 kV
• Ith (IEC): 32 A
• Terminal tightening torque: 1.5 to 1.8 Nm
• Weight: 356 g
• Mechanical life: 20000000 cycles
• Operating temperature: -50 to 70 °C
• Storage temperature: -60 to 80 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• Lovato BF2510A12060 three-pole contactor
• Integrated 1NO auxiliary contact
• Installation and safety information

Applications

• AC-3 motor loads at 400 V up to 25 A
• Resistive AC-1 loads up to 32 A
• Control panels using screw or 35 mm DIN rail mounting
• Installations up to 3000 m altitude within rated conditions
• Environments from −50 to 70 °C operating temperature

Safety note: Install and commission only by qualified personnel. Isolate power before work, verify the 120 VAC 60 Hz coil rating, and tighten terminals to 1.5–1.8 Nm in accordance with applicable standards.