BF2510A024 Lovato contactor 3 pole AC3:25A 12.5kw 24vac coil 1no aux

Why Choose the BF2510A024?

Lovato’s BF2510A024 three-pole contactor delivers dependable switching for AC-3 duties. With a 24VAC 50/60Hz coil and an integral 1NO auxiliary contact, the BF25 series device handles 25A (12.5 kW) at 400 V AC-3 and 32 A AC-1. It mounts via screws or on 35 mm DIN rail, helping panel builders streamline installation while maintaining compact, robust performance.

Built for demanding environments, it offers Ui 690 V, Uimp 6 kV and a mechanical life of 20,000,000 cycles. Operating from −50 to 70 °C and up to 3000 m altitude, it specifies 1.5–1.8 Nm terminal torque. Conforms to IEC/EN/BS and UL/CSA 60947 standards and carries a Sustainability certification.

Key Benefits

• Three-pole AC-3 contactor rated 25A, 12.5 kW at 400 V.
• 24 VAC 50/60 Hz coil for straightforward control integration.
• Built-in 1NO auxiliary contact simplifies signalling and interlocks.
• Screw or 35 mm DIN rail mounting options.
• High mechanical endurance of 20,000,000 cycles.
• Wide operating temperature range from −50 to 70 °C.
• Strong insulation ratings: Ui 690 V and Uimp 6 kV.
• Conforms to IEC/EN/BS, UL and CSA 60947 standards.

Technical Specification

• Product type designation: BF25
• Number of poles: 3
• Rated insulation voltage Ui (IEC/EN): 690 V
• Rated impulse withstand voltage Uimp: 6 kV
• Ith (IEC): 32 A
• Terminal tightening torque: 1.5 to 1.8 Nm
• Weight: 360 g
• Mechanical life: 20000000 cycles
• Operating temperature: -50 to 70 °C
• Storage temperature: -60 to 80 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• 1 x Lovato BF2510A024 three-pole contactor (BF25 series)
• Integrated 1NO auxiliary contact
• Downloadable product datasheet via manufacturer

Applications

• AC-3 duty switching up to 25A, 12.5 kW at 400 V
• AC-1 resistive loads up to 32 A
• Control panels using 35 mm DIN rail or screw mounting
• Installations requiring compliance with IEC/EN/BS 60947 standards

Safety note: Installation and maintenance must be performed by a qualified person. Isolate all power before work, observe the specified torque and ratings, and follow applicable IEC/EN 60947 standards.