BF18T2A23060 - 4P CONTACTOR 2NO+2NC 32A 230V 60HZ

Why Choose the BF18T2A23060?

Engineered for dependable switching, the Lovato BF18T2A23060 four-pole contactor delivers 32 A AC1 performance with an 18 A/7.5Kw AC3 rating at 400 V. Its 230 V 60 Hz AC coil and 2NO+2NC configuration suit a wide range of control and power circuits. Screw or 35 mm DIN rail mounting enables fast installation in industrial panels.

Rated Ui 690 V with 6 kV impulse withstand, this BF18 series device meets IEC/EN/BS 60947-1 and 60947-4-1, plus UL and CSA equivalents. It offers 20,000,000 mechanical cycles, terminal torque 1.5 to 1.8 Nm, and operates from -50 to +70 °C up to 3000 m altitude, Pollution Degree 3, with 35 mm DIN rail or screw mounting and 352 g weight.

Key Benefits

• Versatile four-pole design with 2NO + 2NC contacts.
• Reliable 32 A AC1 and 18 A/7.5Kw AC3 at 400 V.
• 230 V 60 Hz AC coil for straightforward control integration.
• Quick screw or 35 mm DIN rail mounting.
• High insulation: Ui 690 V and 6 kV impulse withstand.
• Long mechanical life rated at 20,000,000 operations.
• Wide operating temperature from -50 to +70 °C.
• Certified to IEC/EN/BS, UL and CSA standards.

Technical Specification

• Product type designation: BF18
• Number of poles: 4
• Rated insulation voltage Ui (IEC/EN): 690 V
• Rated impulse withstand voltage Uimp: 6 kV
• Ith (IEC): 32 A
• Terminal tightening torque: 1.5 to 1.8 Nm
• Weight: 352 g
• Mechanical life: 20000000 cycles
• Operating temperature: -50 to 70 °C
• Storage temperature: -60 to 80 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• Lovato BF18T2A23060 four-pole contactor (2NO + 2NC)
• Manufacturer documentation and datasheet (downloadable)
• Protective packaging for safe transit

Applications

• Motor starters up to 7.5 kW AC3 at 400 V
• Resistive and heating loads up to 32 A AC1
• Industrial control panels and OEM machinery
• Pumps, fans and compressors switching duties
• General power switching in commercial and industrial installations

Safety note: Install and service only by qualified personnel. Isolate all power before work, verify the 230 V coil supply, and tighten terminals to 1.5–1.8 Nm. Observe pollution degree and altitude limits and applicable standards.