BF18T0D060 - 4P CONTACTOR NC 32A AC1 60VDC

Why Choose the BF18T0D060?

The Lovato BF18T0D060 four‑pole contactor is designed for reliable switching in industrial control and power applications. With a 60 V DC coil and 4NC configuration, it delivers dependable isolation for AC‑1 loads up to 32 A and AC‑3 motor duty of 18 A/7.5 kW at 400 V. SKU BF18T0D060 combines robust performance with flexible installation for OEMs, panel builders, and maintenance teams.

Engineered for endurance, it offers 20,000,000 mechanical cycles, rated insulation voltage Ui 690 V and impulse withstand Uimp 6 kV. Operates from −50 to 70 °C at altitudes up to 3000 m, Pollution Degree 3. Screw or 35 mm DIN rail mounting simplifies panel layout; terminal torque is 1.5–1.8 Nm. Conforms to IEC/EN/BS 60947 and UL/CSA standards for assured compliance in UK and international projects.

Key Benefits

• Four-pole 4NC configuration for reliable power isolation and interlocking.
• 32 A AC-1 rating supports general-purpose resistive and light inductive loads.
• 18 A / 7.5 kW AC-3 at 400 V for robust motor switching.
• 60 V DC coil integrates easily with DC control circuits.
• Rated Ui 690 V and Uimp 6 kV for high insulation strength.
• Wide operating temperature range from −50 to 70 °C.
• Flexible screw or 35 mm DIN rail mounting.
• Long mechanical life rated at 20,000,000 cycles.

Technical Specification

• Product type designation: BF18
• Number of poles: 4
• Rated insulation voltage Ui (IEC/EN): 690 V
• Rated impulse withstand voltage Uimp: 6 kV
• Ith (IEC): 32 A
• Terminal tightening torque: 1.5 to 1.8 Nm
• Weight: 496 g
• Mechanical life: 20000000 cycles
• Operating temperature: -50 to 70 °C
• Storage temperature: -60 to 80 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• Lovato BF18T0D060 four-pole contactor (4NC)
• Manufacturer datasheet (downloadable)
• Safety and installation instructions

Applications

• AC‑3 motor loads at 400 V up to 18 A / 7.5 kW
• AC‑1 resistive or lightly inductive circuits up to 32 A
• DC‑coil driven control systems at 60 V
• Multi-pole isolation and safety interlocking (4NC)
• General industrial switching and panel building tasks

Safety note: Install and commission only by qualified personnel. Isolate all power before work, observe the specified terminal torque (1.5–1.8 Nm), and follow the manufacturer’s datasheet and applicable standards.