BF18T0A23060 - 4P CONTACTOR NC 32A 230V 60HZ

Why Choose the BF18T0A23060?

Lovato's BF18T0A23060 four-pole contactor delivers reliable switching for demanding control applications. Featuring a 230VAC 60Hz coil and a 4NC contact set, it provides an IEC AC-1 Ith of 32A and IEC AC-3 performance of 18A/7.5 kW at 400V. A UL/CSA 10 HP rating at 480V broadens compatibility, while the BF18 platform ensures consistent performance in compact control panels.

Engineered for straightforward installation, the BF18 mounts via screws or on a 35mm DIN rail. It carries Ui 690V and Uimp 6kV, with -50 to 70°C operating range, 3000 m altitude capability and pollution degree 3. A mechanical life of 20,000,000 cycles, sustainability certification and compliance to IEC/EN/BS, UL and CSA 60947 standards support longevity and safety.

Key Benefits

• Four-pole, 4NC design for dependable isolation and control.
• 230VAC 60Hz coil suited to common control supply systems.
• 32A IEC AC-1 rating for robust resistive load switching.
• 18A/7.5kW AC-3 at 400V for motor duty applications.
• Screw or 35mm DIN rail mounting for fast panel integration.
• Wide -50 to 70°C operating range and 3000 m altitude capability.
• Mechanical life rated to 20,000,000 cycles for long service.
• Compliant with IEC/EN/BS, UL and CSA 60947 standards.

Technical Specification

• Product type designation: BF18
• Number of poles: 4
• Rated insulation voltage Ui (IEC/EN): 690 V
• Rated impulse withstand voltage Uimp: 6 kV
• Ith (IEC): 32 A
• Terminal tightening torque: 1.5 to 1.8 Nm
• Weight: 360 g
• Mechanical life: 20000000 cycles
• Operating temperature: -50 to 70 °C
• Storage temperature: -60 to 80 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• Lovato BF18T0A23060 four-pole contactor (4NC)
• Installation and safety instructions
• Standard manufacturer packaging

Applications

• Switching resistive loads up to 32 A AC-1
• AC-3 motor control up to 18 A/7.5 kW at 400 V
• Control panels requiring 4 normally closed poles
• Installations with screw or 35 mm DIN rail mounting
• Sites up to 3000 m altitude, pollution degree 3

Safety note: Install and commission only by qualified personnel. Verify the supply matches the 230 VAC 60 Hz coil, tighten terminals to the specified torque, and operate within the stated ratings and environmental limits.