BF18T0A22060 - 4P CONTACTOR NC 32A 220V 60HZ

Why Choose the BF18T0A22060?

Lovato’s BF18T0A22060 is a robust four‑pole contactor designed for dependable switching in industrial control panels. Rated 32 A AC1 with a 220 VAC 60 Hz coil, this 4NC configuration delivers secure isolation for resistive loads and control circuits. With DIN rail 35 mm or screw mounting, it integrates quickly into new builds or retrofits, helping UK installers meet demanding performance and compliance requirements.

Engineered to IEC/EN/BS 60947, the BF18 offers 18 A/7.5 kW AC3 performance at 400 V and a 690 V Ui with 6 kV impulse withstand. Operates from −50 to 70 °C, up to 3000 m altitude, pollution degree 3. Durable 20,000,000‑cycle mechanical life and 1.5–1.8 Nm terminal torque support long service. UL and CSA standards compliance aids global panel acceptance.

Key Benefits

• Four-pole 4NC configuration for reliable power isolation and control.
• 32 A AC1 rating for robust resistive load switching.
• 18 A/7.5 kW AC3 at 400 V for motor duties.
• 220 VAC 60 Hz coil suited to common control supplies.
• Dual screw or DIN rail 35 mm mounting flexibility.
• High endurance: 20,000,000 mechanical cycles for longevity.
• Wide operating temperature −50 to 70 °C for harsh environments.
• 690 V Ui and 6 kV Uimp enhance insulation performance.

Technical Specification

• Product type designation: BF18
• Number of poles: 4
• Rated insulation voltage Ui (IEC/EN): 690 V
• Rated impulse withstand voltage Uimp: 6 kV
• Ith (IEC): 32 A
• Terminal tightening torque: 1.5 to 1.8 Nm
• Weight: 340 g
• Mechanical life: 20000000 cycles
• Operating temperature: -50 to 70 °C
• Storage temperature: -60 to 80 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• Lovato BF18T0A22060 four‑pole contactor (4NC, 220VAC 60Hz coil)
• Product documentation from manufacturer

Applications

• Switching AC1 resistive loads up to 32 A
• Motor starters up to 18 A/7.5 kW at 400 V (AC3)
• Control panels requiring four normally closed power contacts
• Installations using 220 VAC 60 Hz coil control circuits
• DIN rail or screw mounted industrial enclosures

Safety note: Install and commission only by qualified personnel. Observe the stated coil voltage, current ratings, terminal torque (1.5–1.8 Nm) and environmental limits. Disconnect power before wiring and follow applicable IEC/EN, UL and CSA standards.