BF18T0A12060 - 4P CONTACTOR NC 32A 120V 60HZ

Why Choose the BF18T0A12060?

Lovato’s BF18T0A12060 is a robust four‑pole contactor designed for dependable industrial control. Featuring a 120 VAC 60 Hz AC coil and a 4NC configuration, it delivers an IEC Ith (AC1) of 32 A and AC3 performance of 18 A / 7.5Kw at 400 V. Flexible screw or 35 mm DIN rail mounting makes panel integration straightforward, while the BF18 series pedigree ensures consistent performance across demanding applications.

Built for resilience, this BF18 contactor offers Ui 690 V and Uimp 6 kV, with an operating range from −50 to 70 °C and mechanical life rated at 20,000,000 cycles. Terminal tightening torque is 1.5 to 1.8 Nm. It conforms to IEC/EN/BS 60947 and UL/CSA standards, supports installation up to 3000 m, and carries a Sustainability certification for responsible specification.

Key Benefits

• 32 A Ith (AC1) rating for reliable resistive load switching.
• AC3 at 400 V: 18 A / 7.5Kw motor duty capability.
• Four NC poles provide simultaneous isolation across multiple circuits.
• 120 VAC, 60 Hz AC coil suits common control supply voltages.
• Screw or 35 mm DIN rail mounting speeds panel installation.
• High insulation: Ui 690 V and 6 kV impulse withstand.
• Wide -50 to 70 °C operating range for harsh environments.
• Long mechanical life of 20,000,000 cycles reduces downtime.

Technical Specification

• Product type designation: BF18
• Number of poles: 4
• Rated insulation voltage Ui (IEC/EN): 690 V
• Rated impulse withstand voltage Uimp: 6 kV
• Ith (IEC): 32 A
• Terminal tightening torque: 1.5 to 1.8 Nm
• Weight: 360 g
• Mechanical life: 20000000 cycles
• Operating temperature: -50 to 70 °C
• Storage temperature: -60 to 80 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• Lovato BF18T0A12060 four-pole contactor (4NC)
• Pre-fitted 120 VAC 60 Hz AC coil
• Manufacturer installation and safety information

Applications

• AC3 motor loads up to 18 A / 7.5Kw at 400 V
• AC1 resistive loads up to 32 A
• Control panels using 120 VAC 60 Hz control circuits
• Installations requiring four normally closed poles
• Screw or 35 mm DIN rail mounted assemblies

Safety note: Install and commission only when de-energised by qualified personnel. Tighten terminals to 1.5–1.8 Nm and operate within the stated environmental limits and applicable standards.