BF1210D060 - 3P CONTACTOR 1NO 12A AC3 60VDC

Why Choose the BF1210D060?

The Lovato BF1210D060 three‑pole contactor delivers dependable switching with a 60 V DC coil and a built‑in 1NO auxiliary contact. Rated AC3 12 A / 5.7 kW at 400 V and AC1 28 A, it supports reliable control of motors and loads. With screw or 35 mm DIN rail mounting and 690 V rated insulation, this BF12 series device integrates cleanly into control panels.

Engineered for endurance and compliance, the BF12 contactor offers 20,000,000 mechanical cycles, 6 kV impulse withstand, and operation from -50 to 70 °C up to 3,000 m altitude, pollution degree 3. It meets IEC/EN/BS 60947‑1 and 60947‑4‑1, plus UL 60947‑1/‑4‑1 and CSA C22.2 n° 60947‑1/‑4‑1, and provides a 7.5 HP rating at 480 V. Terminal screws accept 1.5 to 1.8 Nm tightening torque for secure connections.

Key Benefits

• AC3 switching up to 12 A / 5.7 kW at 400 V.
• Wide operating temperature range from -50 to 70 °C.
• Long 20,000,000-cycle mechanical life minimises downtime.
• 60 V DC coil provides stable, precise control signals.
• Built‑in 1NO auxiliary contact for straightforward signalling.
• Screw or 35 mm DIN rail mounting simplifies installation.
• High insulation 690 V and 6 kV impulse withstand.
• Complies with IEC/EN/BS, UL and CSA standards.

Technical Specification

• Product type designation: BF12
• Number of poles: 3
• Rated insulation voltage Ui (IEC/EN): 690 V
• Rated impulse withstand voltage Uimp: 6 kV
• Ith (IEC): 28 A
• Terminal tightening torque: 1.5 to 1.8 Nm
• Weight: 496 g
• Mechanical life: 20000000 cycles
• Operating temperature: -50 to 70 °C
• Storage temperature: -60 to 80 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• Lovato BF1210D060 three-pole contactor (BF12 series)
• Integrated 1NO auxiliary contact
• Manufacturer datasheet (downloadable)
• Original packaging

Applications

• Motor control circuits rated AC3 12 A / 5.7 kW at 400 V
• General AC1 resistive loads up to 28 A
• Control panels using 60 VDC coil signalling
• Installations requiring 1NO auxiliary status indication
• DIN rail or screw-mounted assemblies up to 3,000 m altitude

Safety note: Installation should be performed by qualified personnel. Adhere to the stated ratings, observe terminal tightening torque (1.5–1.8 Nm), and comply with applicable IEC/EN/BS and UL/CSA standards.