BF0901A22060 - 3P CONTACTOR 1NC 9A AC3 220/60

Why Choose the BF0901A22060?

Lovato BF0901A22060 is a three-pole contactor designed for dependable motor and load switching. It features a 220 V AC 60 Hz coil and an integrated 1NC auxiliary with mirror contact function. Rated AC3 9A/4.2Kw at 400 V and Ith 25 A, it supports robust control performance. Flexible mounting on 35 mm DIN rail or by screw makes installation straightforward across control panels.

Part of the BF09 family of contactors, this unit offers 690 V rated insulation and 6 kV impulse withstand for reliable isolation. A mechanical life of 20,000,000 cycles, operating from -50 to 70 °C, and suitability up to 3000 m altitude enhance durability. Complies with IEC/EN/BS 60947-1/-4-1, UL and CSA standards, supporting safe integration in industrial control systems.

Key Benefits

• Three-pole switching for AC-3 loads up to 9A at 400 V.
• 220 V AC 60 Hz coil for consistent, reliable control performance.
• Integrated 1NC auxiliary with mirror contact function for feedback.
• Wide operating temperature range from -50 to 70 °C.
• High mechanical life rated at 20,000,000 cycles.
• 35 mm DIN rail or screw mounting for easy installation.
• Rated insulation 690 V and 6 kV impulse withstand.
• Conforms to IEC/EN/BS, UL and CSA standards.

Technical Specification

• Product type designation: BF09
• Number of poles: 3
• Rated insulation voltage Ui (IEC/EN): 690 V
• Rated impulse withstand voltage Uimp: 6 kV
• Ith (IEC): 25 A
• Terminal tightening torque: 1.5 to 1.8 Nm
• Weight: 348 g
• Mechanical life: 20000000 cycles
• Operating temperature: -50 to 70 °C
• Storage temperature: -60 to 80 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• Lovato BF0901A22060 three-pole contactor (BF09 series)
• Pre-fitted 220 V AC 60 Hz coil
• Integrated 1NC auxiliary contact with mirror function
• Installation leaflet

Applications

• AC-3 motor starters up to 9A at 400 V
• General-purpose resistive loads up to 25 A (AC1)
• Control panels requiring 35 mm DIN rail or screw mounting
• UL/CSA motor loads up to 5 HP at 480 V
• Industrial automation switching within Ui 690 V systems

Safety note: Installation should be performed by qualified personnel with power isolated. Observe IEC/EN/BS 60947 requirements, tighten terminals to 1.5 to 1.8 Nm, and operate within the stated electrical and environmental ratings.