BF0022A02460 - CONTROL RELAY 2NO+2NC 24/60

Why Choose the BF0022A02460?

Lovato’s BF0022A02460 control relay sits within the Control relays with AC and DC control circuit range, delivering reliable switching for panel and machine control. It features a 24 VAC, 60 Hz coil and a 4‑pole, 2NO+2NC contact set. Simple screw or 35 mm DIN rail mounting streamlines installation in compact enclosures and control assemblies.

Engineered for resilience, it offers Ui 690 V, Uimp 6 kV and Ith 10 A, with a mechanical life of 20,000,000 cycles. Operates from −50 to 70 °C at altitudes up to 3000 m, Pollution Degree 3. Conforms to IEC/EN, UL and CSA standards; terminal screws tighten to 1.5–1.8 Nm for secure wiring.

Key Benefits

• 24 VAC 60 Hz coil delivers consistent, dependable actuation in control circuits.
• 2NO+2NC auxiliary contacts provide flexible logic across a 4‑pole device.
• High dielectric strength with Ui 690 V and Uimp 6 kV ratings.
• Robust 10 A Ith supports general-purpose switching duties confidently.
• Wide −50 to 70 °C operating range suits demanding industrial environments.
• Screw or 35 mm DIN rail mounting enables fast, versatile installation.
• Tested to IEC/EN, UL and CSA standards for assured compliance.

Technical Specification

• Product type designation: BF00
• Number of poles: 4
• Rated insulation voltage Ui (IEC/EN): 690 V
• Rated impulse withstand voltage Uimp: 6 kV
• Ith (IEC): 10 A
• Terminal tightening torque: 1.5 to 1.8 Nm
• Weight: 350 g
• Mechanical life: 20000000 cycles
• Operating temperature: -50 to 70 °C
• Storage temperature: -60 to 80 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• BF0022A02460 control relay
• Installation and safety information
• Protective packaging

Applications

• Machine and panel control circuits
• Auxiliary switching, interlocking and signalling tasks
• Industrial automation and process control panels
• HVAC and building services control cabinets

Safety note: Install and service only when power is isolated, by qualified personnel. Observe the 1.5–1.8 Nm terminal tightening torque and use the relay strictly within its stated ratings and standards.