abb softstarter PSTX370-690-70 pstx (690v) range 370 amp

Why Choose the PSTX370-690-70 [1SFA898215R7000]

The softstarter PSTX370-690-70 has a rated maximum operational current of 370 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard.To interact with PSTX, it has a detachable full graphic display with IP66 and 4x outdoor rating. There are four ways to communicate with PSTX. It can be done by hardwire inputs Start/Stop/Reset of fault, and by three programmable digital inputs. Another popular option is the built-in Fieldbus communication Modbus RTU and incl optional ANYBUS modules with every major protocol such as for example Profinet, Profibus, Modbus TCP, Ethernet IP and others. Another way to communicate with PSTX is to use an external adaptor and a Fieldbus plug. PSTX is the complete alternative for any motor starting application. It’s suitable for medium to large-sized three-phase motors with nominal currents from 30...1250 A inline connection or 52...2160 A inside delta connection. Typical applications are, for example, pumps, fans, compressors, and conveyors.

Technical Specification

• Rated Operational Current: 370 A (Inline connection), 640 A (Inside delta connection).
• Rated Voltage Range: 208 to 690 V AC, three-phase.
• Control Supply Voltage: 100 to 250 V AC, 50/60 Hz.
• Protection Rating: Main terminals IP00, full unit compliant with IEC 60529 and IEC 60947-1.
• Ramp Time: Adjustable from 1 to 120 seconds for soft start and stop.
• Terminal Type and Size: Main circuit bars with 10.2 mm hole diameter, suitable for rigid conductors up to 2.5 mm² for control circuits.
• Built-in Protection Features: Electronic overload, phase sequence detection, earth fault, under/over voltage, current imbalance and locked rotor protection.
• Mechanical Data: Weight 15.5 kg; main circuit tightening torque 25 N·m (221.3 lb-in UL/CSA).
• Communication Interfaces: Modbus RTU, Modbus TCP, EtherNet/IP, Profinet, Profibus and optional ANYBUS modules.

Trusted By Customers Worldwide

"Specified by UK panel builders for dependable control." Controls Engineer, UK