abb softstarter PSRC30-600-70 psrc range 30 amp

Why Choose the PSRC30-600-70 [1SFA896209R7000]

The softstarter PSRC30-600-70 has a rated maximum operational current of 30 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...240 V AC at 50/60 Hz. PSRC features a two-phase control soft start through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN signal is available from a relay output in NO (normally open state). The PSRC softstarter range is a true plug-and-play with a fixed setting optimized for scroll compressors. PSRC is often combined with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSRC is fast and easy to install with fixed settings. Designed for scroll compressors results in less stress on the compressor reducing the maintenance cost to a minimum. The PSRC range are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are compressors.

Technical Specification

• Function: Soft start and stop with voltage ramp.
• Rated Operational Voltage: 208–600 V AC.
• Rated Operational Current: 30 A.
• Control Supply Voltage: 100–240 V AC, 50/60 Hz.
• Contact Configuration: Run and bypass relay outputs, normally open (NO).
• Degree of Protection: IP20 (main terminals, IEC 60529).
• Terminal Type and Capacity: Screw terminals for rigid cables 2 × 0.75–1.5 mm².
• Tightening Torque: Main circuit 2.3 N·m; control and supply circuits 0.6 N·m.
• Maximum Starts per Hour: 10 at 3.5×Ie with 50% duty cycle.
• Compatibility: Suitable for small three-phase motors, optimised for scroll compressors.

Trusted By Customers Worldwide

"Specified by UK panel builders for dependable control." Controls Engineer, UK