7GN3253P - 3P 3POS SWITCH GN3253P C/W HOUSING

Why Choose the 7GN3253P?

Designed for reliable manual changeover, the Lovato 7GN3253P is a rotary cam changeover switch in the 7GN series. This 3-pole, 32A unit comes factory enclosed in a compact 90x90mm plastic housing with a black handle and IP65 frontal protection. With a rated impulse withstand voltage of 6 kV, it delivers robust performance for demanding industrial control duties.

Built on the 7GN32 platform with round-shaped contact block, it follows switching diagram 53 for 3-pole changeover and two-speed motor starting with separate windings. Operating from -25 to +55 °C and storage -40 to +70 °C, it conforms to IEC/EN/BS 60947-1, -3 and -5-1. Mounting form P provides a ready-to-install plastic enclosure with black handle.

Key Benefits

• 3-pole, 32A rating for dependable changeover of industrial circuits.
• IP65 frontal protection resists dust and water ingress at the operator face.
• Compact 90x90mm plastic enclosure with pre-fitted black handle.
• Switching diagram 53 supports two-speed motor starting with separate windings.
• 6 kV impulse withstand voltage enhances resilience against transients.
• Wide operating temperature range from -25 to +55 °C.
• Conforms to IEC/EN/BS 60947-1, -3 and -5-1 standards.
• 7GN series round-shaped contact block for proven reliability.

Technical Specification

• Product type designation: 7GN32
• Rated impulse withstand voltage Uimp: 6 kV
• Operating temperature: -25 to +55 °C
• Storage temperature: -40 to +70 °C
• IP degree (frontal): IP65

What’s Included

• Enclosed 3-pole 32A changeover rotary cam switch (90x90mm)
• Integrated black operating handle and plastic enclosure (Mounting form P)
• Factory-fitted 7GN round-shaped contact block

Applications

• Manual changeover of 3-pole circuits up to 32A
• Two-speed motor starting with separate windings (diagram 53)
• Local control where IP65 frontal protection is required
• Industrial panels complying with IEC/EN/BS 60947

Safety note: Installation must be carried out by competent personnel. Isolate all supplies before work and operate within the stated 32 A, IP65 and temperature limits in line with IEC/EN/BS 60947.