3013136 Cembre 200110041N BSP COMPRESSION CABLE GLAND

CABLE GLAND - Cembre (200110041N): Industrial-grade performance for demanding applications

The MAXIBRASS 2003 2002 and 2001 series of cable glands make it possible to safely tighten and seal through-hole cables on electrical installation panels, preventing them from being cut and deformed as a result of mechanical traction. They are made of brass and, thanks to the nickel-plating process, are more durable and resistant to wear, weathering and chemical corrosion. They are designed to provide an IP54 level of protection against infiltration by external bodies and water jets. These cable glands feature M 1.5 metric type threads, according to CEI EN 60423 and CEI EN 62444, Pg type threads, according to DIN 40 430, and also GAS type threads, according to ISO 228/1, to ensure efficient clamping between the cable shielding and the housing under all circumstances. They come in different diameters and with various mounting thread sizes and lengths to meet every application requirement. Locknuts, locknuts with collars, enlargers, reductions, caps, seals and multi-hole gaskets complete the series, adapting the cable glands to any use.

Key Features

• The MAXIBRASS 2003 2002 and 2001 series of cable glands make it possible to safely tighten and seal through-hole cables on electrical installation panels, preventing them from being cut and deformed as a result of mechanical traction
• They are made of brass and, thanks to the nickel-plating process, are more durable and resistant to wear, weathering and chemical corrosion. They are designed to provide an IP54 level of protection against infiltration by external bodies and water jets. These cable glands feature M 1.5 metric type threads, according to CEI EN 60423 and CEI EN 62444, Pg type threads, according to DIN 40 430, and also GAS type threads, according to ISO 228/1, to ensure efficient clamping between the cable shielding and the housing under all circumstances. They come in different diameters and with various mounting thread sizes and lengths to meet every application requirement. Locknuts, locknuts with collars, enlargers, reductions, caps, seals and multi-hole gaskets complete the series, adapting the cable glands to any use

Technical Specifications

• tipo: G1
• P: PVC 50 sh A
• Inner seal material: 18 ÷ 22
• Range of cable housing diameter [mm]: 34
• B1 [mm]: 36
• B2 [mm]: 10
• C [mm]: 23 ÷ 28
• L [mm]: 34
• ØF [mm]: 36
• Width: 25
• Unit in minimal packaging [pce]: 25

Applications

• Industrial panels and switchgear
• Machine and equipment labelling
• Control cabinets and facilities

Frequently Asked Questions

• What is this product used for? CABLE GLAND - Cembre is used for its intended application in industrial and commercial panels, controls and assemblies. It helps installers achieve reliable, repeatable results with minimal rework.
• Is it compatible with common standards? Yes. It is designed to meet or support widely used industry requirements where applicable. Always check the technical table and datasheet for specific approvals.
• What else do I need to install it correctly? Refer to the technical table for sizing and accessory requirements. Use appropriate tools, conductor sizes and torque values recommended by the manufacturer.