11BGP0910D024 - MINICONTACTOR 3P+1NC 9A AC3 DC REAR PIN

Why Choose the 11BGP0910D024?

Lovato’s 11BGP0910D024 is a compact, three-pole contactor engineered for dependable motor switching and control. With a 24VDC coil, AC‑3 rating of 9A at 400V (4.0 kW) and an integrated 1NO auxiliary contact, it suits modern control panels. Rear PCB solder pin connectivity and screw or 35 mm DIN rail mounting give flexible installation options for OEMs and maintainers.

Built to IEC/EN 60947 standards, the BGP09 offers 500 V rated insulation (Ui) and 6 kV impulse withstand (Uimp) for robust performance. It carries 20 A Ith (AC1), operates from −50 to +70 °C, and is tested to 20,000,000 mechanical cycles. With 5 HP at 480 V UL/CSA, pollution degree 3 and 3000 m altitude rating, it’s ready for demanding environments.

Key Benefits

• AC‑3 9A at 400V delivers dependable 4.0 kW motor control.
• Wide −50 to +70 °C operating range for harsh environments.
• High insulation strength: Ui 500 V, Uimp 6 kV robustness.
• Long mechanical life rated to 20,000,000 operations for reliability.
• Flexible screw or 35 mm DIN rail mounting options.
• Integrated 1NO auxiliary contact simplifies signalling and interlocks.
• UL/CSA and IEC/EN 60947 compliance supports global panel standards.

Technical Specification

• Product type designation: BGP09
• Number of poles: 3
• Rated insulation voltage Ui (IEC/EN): 500 V
• Rated impulse withstand voltage Uimp: 6 kV
• Ith (IEC): 20 A
• Terminal tightening torque: 0.8 to 1 Nm
• Weight: 240 g
• Mechanical life: 20000000 cycles
• Operating temperature: -50 to +70 °C
• Storage temperature: -60 to +80 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• Lovato BGP09 three-pole contactor (SKU 11BGP0910D024)
• Integrated 1NO auxiliary contact
• Rear PCB solder pin connection
• Installation and safety instructions

Applications

• AC-3 motor control up to 4.0 kW at 400 V
• Pumps, fans, conveyors and compressors
• Control panels using 24 VDC control circuits
• OEM machinery and automation systems
• General AC-1 resistive loads within 20 A Ith

Safety note: Install and commission only by qualified personnel. Isolate power before work, observe specified tightening torques (0.8–1 Nm), and follow applicable IEC/EN and UL/CSA standards.