11BGF09T4A230 - 4P MINICONTACTOR BGF09.T4A 230V50/60FAST

Why Choose the 11BGF09T4A230?

The Lovato 11BGF09T4A230 is a compact four-pole contactor designed for dependable switching in control panels and machinery. It features an AC coil for 50/60 Hz operation at 230 VAC and convenient Faston terminals for rapid wiring. With AC3 9A/4.0 kW at 400 V and AC1 Ith 20 A, plus screw or 35 mm DIN rail mounting, it streamlines installation and service.

Built to rigorous standards, this BGF09 contactor offers Ui 690 V and 6 kV impulse withstand, with a mechanical life of 20,000,000 cycles. It operates from -50 to +70 °C and stores from -60 to +80 °C, suitable up to 3000 m altitude, pollution degree 3. Conforms to IEC/EN 60947-1 and 60947-4-1, UL 60947-1 and 60947-4-1, and CSA C22.2 n° 60947-1 and 60947-4-1.

Key Benefits

• Four-pole design supports multi-circuit switching in compact assemblies.
• 230 VAC 50/60 Hz AC coil simplifies control supply selection.
• Faston terminals enable rapid, secure wiring.
• Robust ratings: AC3 9A/4.0 kW at 400 V.
• High insulation: Ui 690 V, Uimp 6 kV.
• Long mechanical life of 20,000,000 operations.
• Flexible screw or 35 mm DIN rail mounting.
• UL/CSA horsepower rating: 5 HP at 480 V.

Technical Specification

• Product type designation: BGF09
• Number of poles: 4
• Rated insulation voltage Ui (IEC/EN): 690 V
• Rated impulse withstand voltage Uimp: 6 kV
• Ith (IEC): 20 A
• Terminal tightening torque: 0.8 to 1 Nm
• Weight: 181 g
• Mechanical life: 20000000 cycles
• Operating temperature: -50 to +70 °C
• Storage temperature: -60 to +80 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• Lovato 11BGF09T4A230 four-pole contactor (designation BGF09)
• Manufacturer datasheet and documentation
• Product labelling and identification
• Original packaging

Applications

• Switching AC3 motors up to 4.0 kW at 400 V
• Control of AC1 resistive loads up to 20 A
• Panels requiring DIN rail or screw-mounted contactors
• Installations operating from -50 to +70 °C, up to 3000 m

Safety note: Install and service only when de-energised by qualified personnel. Follow IEC/EN 60947 practices, observe 0.8–1 Nm terminal torque, and ensure environmental ratings (altitude and pollution degree) are respected.