11BGF0901D060 - MINICONTACTOR 3P+1NC 9A DC/COIL FASTON

Why Choose the 11BGF0901D060?

Lovato’s BGF09 three-pole DC contactor delivers dependable motor and load switching in compact form. With a 60V DC coil, 9A AC-3 at 400V (4.0 kW) performance, and a built-in 1NC auxiliary, it simplifies control circuits and interlocks. Faston terminals speed panel wiring, while screw or 35mm DIN rail mounting suits modern assemblies. SKU 11BGF0901D060.

Engineered for demanding panels, it offers Ith 20 A, Ui 690 V and 6 kV impulse withstand, with mechanical life to 20,000,000 cycles. Operates from -50 to +70 °C, up to 3000 m altitude, pollution degree 3. Terminal tightening torque is 0.8 to 1 Nm, weight 224 g. Conforms to IEC/EN 60947-1/-4-1, UL and CSA standards.

Key Benefits

• 9A AC-3 at 400V, suitable for motors up to 4.0 kW.
• 60V DC coil enables reliable control from DC power supplies.
• Built-in 1NC auxiliary contact for status or interlocking functions.
• Faston terminals reduce wiring time and improve panel serviceability.
• Screw or 35mm DIN rail mounting for flexible installation.
• Wide operating temperature range from -50 to +70 °C.
• High mechanical life rated to 20,000,000 operating cycles.
• Certified to IEC/EN, UL and CSA standards for global compliance.

Technical Specification

• Product type designation: BGF09
• Number of poles: 3
• Rated insulation voltage Ui (IEC/EN): 690 V
• Rated impulse withstand voltage Uimp: 6 kV
• Ith (IEC): 20 A
• Terminal tightening torque: 0.8 to 1 Nm
• Weight: 224 g
• Mechanical life: 20000000 cycles
• Operating temperature: -50 to +70 °C
• Storage temperature: -60 to +80 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• Lovato BGF09 3-pole DC contactor, SKU 11BGF0901D060
• Integrated 1NC auxiliary contact
• Faston terminals as standard
• Downloadable manufacturer datasheet

Applications

• AC motor control up to 4.0 kW at 400V (AC-3)
• General-purpose switching of AC-1 loads up to 20 A
• Control panels requiring 60V DC coil contactors
• OEM machinery and automation with DIN rail mounting
• HVAC, pumps and fans within rated limits

Safety note: Install and commission only by qualified personnel. Isolate power before work, tighten terminals to 0.8–1 Nm, and operate strictly within the stated electrical ratings and environmental limits.