11BGF0040D110 - CONTROL RELAY BGF00.40D 110VDC FASTON

Why Choose the 11BGF0040D110?

The Lovato 11BGF0040D110 is a control relay with DC coil designed for dependable control circuits. Part of Lovato’s control relays with AC and DC control circuit range, it combines a 110 VDC coil with four normally open auxiliary contacts. Faston terminals speed up wiring, while screw or 35 mm DIN rail mounting provides installation flexibility for compact panels.

Engineered to perform, the BGF00 designation delivers Ui 690 V, Uimp 6 kV and Ith 10 A, with a mechanical life of 20,000,000 cycles. It operates from -50 to +70 °C up to 3000 m altitude, and complies with IEC/EN 60947-1 and 60947-5-1, UL 60947-1 and 60947-5-1, and CSA C22.2 No. 60947-1 and 60947-5-1.

Key Benefits

• 110 VDC coil suits DC-powered control circuits.
• Four NO auxiliary contacts simplify signal expansion.
• Faston terminals enable rapid, reliable panel wiring.
• Screw or 35 mm DIN rail mounting flexibility.
• High Ui 690 V and Uimp 6 kV insulation performance.
• Ith 10 A capability supports robust control applications.
• Mechanical life of 20,000,000 cycles reduces downtime.
• Wide -50 to +70 °C operating temperature range.

Technical Specification

• Product type designation: BGF00
• Number of poles: 4
• Rated insulation voltage Ui (IEC/EN): 690 V
• Rated impulse withstand voltage Uimp: 6 kV
• Ith (IEC): 10 A
• Terminal tightening torque: 0.8 to 1 Nm
• Weight: 222 g
• Mechanical life: 20000000 cycles
• Operating temperature: -50 to +70 °C
• Storage temperature: -60 to +80 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• Lovato BGF00 control relay, 110 VDC coil, 4NO Faston
• Installation and safety information (manufacturer documentation)
• Protective packaging for transit

Applications

• Auxiliary control and signalling in industrial control circuits
• Contact expansion where four NO contacts are required
• Panel building with screw or 35 mm DIN rail mounting
• DC coil applications requiring 110 VDC operation

Safety note: Installation and maintenance should be performed by qualified personnel. Always isolate power before wiring, tighten terminals to 0.8–1 Nm, and operate within the stated electrical and environmental ratings.