11BGF0031D012 - CONTROL RELAY BGF00.31D 12VDC FASTON

Why Choose the 11BGF0031D012?

Engineered for reliable switching in control circuits, the Lovato BGF00 control relay with 12V DC coil delivers 4‑pole performance with 3NO+1NC contacts. SKU 11BGF0031D012 features Faston terminals for quick connection and offers screw or 35 mm DIN rail mounting. Rated insulation voltage is 690 V with 6 kV impulse withstand, and Ith is 10 A for dependable operation in AC and DC control applications.

Built for longevity, this BGF00 relay achieves 20,000,000 mechanical cycles and operates from -50 to +70 °C, with storage from -60 to +80 °C. It can be installed up to 3000 m (pollution degree 3) and uses 0.8–1 Nm terminal tightening torque. Conforms to IEC/EN 60947-1 and 60947-5-1, plus UL and CSA standards, supporting dependable performance in UK industrial control cabinets.

Key Benefits

• 12V DC coil for reliable, low-voltage control integration.
• 3NO+1NC contacts provide flexible switching logic across four poles.
• High insulation rating: 690 V Ui and 6 kV Uimp.
• 10 A Ith handles typical control circuit loads with confidence.
• Wide operating temperature range from -50 to +70 °C.
• DIN rail 35 mm or screw mounting for fast panel installation.
• Faston terminals enable quick, tool-less connection and replacement.
• Long mechanical life rated at 20,000,000 cycles.

Technical Specification

• Product type designation: BGF00
• Number of poles: 4
• Rated insulation voltage Ui (IEC/EN): 690 V
• Rated impulse withstand voltage Uimp: 6 kV
• Ith (IEC): 10 A
• Terminal tightening torque: 0.8 to 1 Nm
• Weight: 220 g
• Mechanical life: 20000000 cycles
• Operating temperature: -50 to +70 °C
• Storage temperature: -60 to +80 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• Lovato control relay 11BGF0031D012 (BGF00 series)
• Quick-start installation leaflet
• Conformity and certification information
• Protective packaging

Applications

• AC and DC control circuits requiring 12V DC coil actuation
• Panel-building and OEM machinery with 3NO+1NC contact requirements
• Industrial automation interlocks, signalling and interface switching
• Environments with wide temperature variation and up to 3000 m altitude
• Retrofit or expansion on 35 mm DIN rail assemblies

Safety note: Install and commission only by qualified personnel. Isolate power before wiring, observe specified torque, voltage, temperature, altitude and pollution degree limits, and follow applicable IEC/EN, UL and CSA standards.