11BG09T2D012 - 4P MINICONTACTOR BG09.T2D 12VDC

Why Choose the 11BG09T2D012?

Designed for reliable control switching, the Lovato BG09 four‑pole contactor with 12 V DC coil delivers versatile performance with 2NO and 2NC contacts. Rated AC3 9A/4.0Kw at 400V and AC1 20A, it suits general‑purpose and motor duty circuits. Screw or 35 mm DIN rail mounting speeds panel assembly. Order as SKU 11BG09T2D012 for a compact, robust contactor that fits neatly into modern control panels.

Built to demanding standards, the BG09 offers 690 V rated insulation and 6 kV impulse withstand, with mechanical life to 20,000,000 cycles. It operates from −50 to +70 °C and stores from −60 to +80 °C, up to 3000 m altitude, Pollution Degree 3. UL/CSA horsepower rating is 5 HP at 480 V. Terminal tightening torque is 0.8–1 Nm for secure connections.

Key Benefits

• Four‑pole, 2NO + 2NC configuration for flexible control schemes.
• 12 V DC coil simplifies low‑voltage control integration.
• AC3 9A/4.0Kw at 400V for dependable motor duty switching.
• AC1 20A rating supports resistive and general‑purpose loads.
• Rated insulation 690 V and 6 kV impulse withstand robustness.
• Wide −50 to +70 °C operating temperature range.
• Screw or 35 mm DIN rail mounting for rapid installation.
• Long mechanical life up to 20,000,000 cycles.

Technical Specification

• Product type designation: BG09
• Number of poles: 4
• Rated insulation voltage Ui (IEC/EN): 690 V
• Rated impulse withstand voltage Uimp: 6 kV
• Terminal tightening torque: 0.8 to 1 Nm
• Weight: 221 g
• Mechanical life: 20000000 cycles
• Operating temperature: -50 to +70 °C
• Storage temperature: -60 to +80 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• Lovato BG09 four‑pole contactor (SKU 11BG09T2D012)
• Integrated 12 V DC coil with 2NO + 2NC contacts
• Screw/DIN rail 35 mm compatible housing

Applications

• Motor duty circuits up to 9A/4.0Kw at 400V (AC3)
• General‑purpose AC1 loads up to 20A
• Control panels using 12 V DC coil actuation
• Four‑pole switching schemes requiring 2NO + 2NC contacts
• Installations conforming to IEC/EN 60947 standards

Safety note: Install and commission only by qualified personnel. Verify 12 V DC coil supply, observe AC1/AC3 ratings, and tighten terminals to 0.8–1 Nm. Follow IEC/EN 60947 and local regulations.