11BG09T2A110 - 4P MINICONTACTOR BG09.T2A 110V 50-60HZ

Why Choose the 11BG09T2A110?

Engineered by Lovato, the BG09 series four-pole contactor delivers dependable switching for motor and general-purpose loads. The 11BG09T2A110 features an AC coil for 50/60Hz at 110VAC, with a 2NO and 2NC contact arrangement for flexible control logic. Rated 20A AC-1 and 9A/4.0kW AC-3 at 400V, it suits panel builders seeking reliable performance and tidy installation on screw fixings or 35mm DIN rail.

With a rated insulation voltage of 690 V and 6 kV impulse withstand, this BG09 contactor is built for demanding environments. It offers 20,000,000 mechanical cycles, operates from -50 to +70 °C, and is suitable up to 3000 m, pollution degree 3. Terminals tighten to 0.8 to 1 Nm. Conforms to IEC/EN 60947-1/-4-1 and UL/CSA equivalents, with 5 HP at 480 V per UL/CSA.

Key Benefits

• Four-pole design with 2NO and 2NC for versatile control configurations.
• 110VAC AC coil, 50/60Hz, compatible with standard control supplies.
• AC-1 20A and AC-3 9A/4.0kW performance at 400V.
• Dual mounting options: screw fixing or 35mm DIN rail.
• High durability with 20,000,000 mechanical life cycles.
• Robust insulation: 690 V Ui and 6 kV impulse withstand.
• Wide operating temperature range from -50 to +70 °C.
• Complies with IEC/EN 60947 and UL/CSA standards.

Technical Specification

• Product type designation: BG09
• Number of poles: 4
• Rated insulation voltage Ui (IEC/EN): 690 V
• Rated impulse withstand voltage Uimp: 6 kV
• Terminal tightening torque: 0.8 to 1 Nm
• Weight: 180 g
• Mechanical life: 20000000 cycles
• Operating temperature: -50 to +70 °C
• Storage temperature: -60 to +80 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• Lovato BG09 four-pole contactor, 2NO and 2NC (SKU 11BG09T2A110)
• Manufacturer documentation available via product data sheet link
• Original manufacturer packaging

Applications

• Motor starters and AC-3 duty switching up to 9A/4.0kW at 400V
• Resistive and general-purpose loads within AC-1 duty up to 20A
• Control panels using screw or 35mm DIN rail mounting
• Circuits requiring mixed 2NO and 2NC contact arrangements

Safety note: Install and commission only by qualified personnel. Isolate power before work, tighten terminals to 0.8–1 Nm, and observe the specified temperature, altitude and standards for safe operation.