11BG0610A230 - 3P MINICONTACTOR BG06.10A 230V 50-60HZ

Why Choose the 11BG0610A230?

Lovato BG06 three-pole contactor, SKU 11BG0610A230, delivers reliable switching for motors and AC loads. It is rated 6A AC3 (2.2 kW) at 400 V and uses a 230 VAC 50/60 Hz coil, with a built-in 1NO auxiliary contact for signalling. Flexible screw or 35 mm DIN rail mounting streamlines panel integration and maintenance.

Engineered to IEC/EN 60947 standards, the BG06 offers 16 A AC1 Ith, Ui 690 V and 6 kV impulse withstand for assured performance. A wide operating temperature of -50 to +70 °C, mechanical life of 20,000,000 cycles, and use up to 3000 m altitude with pollution degree 3 support dependable service in varied environments.

Key Benefits

• 6 A AC3 at 400 V for 2.2 kW motor control.
• 230 VAC 50/60 Hz coil for straightforward control integration.
• Built-in 1NO auxiliary contact simplifies status signalling.
• Screw or 35 mm DIN rail mounting speeds installation.
• Ui 690 V and 6 kV impulse withstand enhance insulation robustness.
• Operates from -50 to +70 °C across diverse conditions.
• Mechanical life of 20,000,000 cycles supports long service life.

Technical Specification

• Product type designation: BG06
• Number of poles: 3
• Rated insulation voltage Ui (IEC/EN): 690 V
• Rated impulse withstand voltage Uimp: 6 kV
• Ith (IEC): 16 A
• Terminal tightening torque: 0.8 to 1 Nm
• Weight: 182 g
• Mechanical life: 20000000 cycles
• Operating temperature: -50 to +70 °C
• Storage temperature: -60 to +80 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• Lovato BG06 three-pole contactor (SKU 11BG0610A230)
• Built-in 1NO auxiliary contact
• 230VAC 50/60Hz coil pre-fitted
• Downloadable datasheet and documentation

Applications

• Motor control up to 2.2 kW at 400 V (AC3)
• General-purpose switching of AC1 loads up to 16 A
• Control panels and OEM machinery
• Motor starters rated up to 3 HP at 480 V (UL/CSA)
• DIN rail mounted automation and distribution assemblies

Safety note: Installation must be performed by qualified personnel. Isolate power before work, tighten terminals to 0.8 to 1 Nm, and observe temperature, altitude and pollution degree limits.