11BG0610A024 - 3P MINICONTACTOR BG06.10A 24V 50/60Hz

Why Choose the 11BG0610A024?

Lovato BG06 three-pole contactor 11BG0610A024 delivers reliable motor and load control in compact panels. Rated 6A AC3 at 400V (2.2 kW) with a 24VAC 50/60Hz coil, it includes a built-in 1NO auxiliary contact for signalling. Flexible screw or 35mm DIN rail mounting speeds installation, while robust insulation (Ui 690 V, Uimp 6 kV) supports demanding industrial environments.

Designed for durability, this contactor offers 20,000,000 mechanical operations and an extended operating temperature range of -50 to +70 °C, with storage down to -60 °C. It meets IEC/EN 60947-1 and 60947-4-1, plus UL/CSA equivalents, and carries a sustainability certification. Rated Ith 16 A (AC1) and 3 HP at 480 V UL/CSA, it suits wide-ranging control duties.

Key Benefits

• 6A AC3 at 400V handles motors up to 2.2 kW.
• 24VAC 50/60Hz coil simplifies integration with common control voltages.
• Built-in 1NO auxiliary contact provides instant status signalling.
• Screw or 35mm DIN rail mounting for fast, flexible installation.
• High insulation ratings: Ui 690 V and Uimp 6 kV.
• Extended operating range from -50 to +70 °C for harsh environments.
• Long mechanical life of 20,000,000 cycles reduces maintenance.

Technical Specification

• Product type designation: BG06
• Number of poles: 3
• Rated insulation voltage Ui (IEC/EN): 690 V
• Rated impulse withstand voltage Uimp: 6 kV
• Ith (IEC): 16 A
• Terminal tightening torque: 0.8 to 1 Nm
• Weight: 179 g
• Mechanical life: 20000000 cycles
• Operating temperature: -50 to +70 °C
• Storage temperature: -60 to +80 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• Contactor unit (Lovato BG06, SKU 11BG0610A024)
• Built-in 1NO auxiliary contact
• Mounting via screw or 35mm DIN rail
• Downloadable manufacturer datasheet

Applications

• Control of small AC motors up to 2.2 kW (AC3 400 V)
• General-purpose switching of resistive loads up to 16 A (AC1)
• Panel building and OEM machinery on 35 mm DIN rail
• Building services, pumps, fans and conveyors control circuits

Safety note: Installation and maintenance must be performed by qualified personnel. Isolate power before work, verify the 24 VAC coil voltage, tighten terminals to 0.8–1 Nm, and operate within the specified electrical and environmental ratings.