11B6304L00220C220 - 4P CONTACTOR 220/240V C/W LATCH 220VDC

Why Choose the 11B6304L00220C220?

Designed for heavy-duty switching, the Lovato Four-Pole Contactor 11B6304L00220C220 combines a 220…240 V AC/DC coil with a pre-fitted mechanical latch (G495) for secure, maintained operation. It delivers an IEC AC1 operating current of 800 A and supports AC3 630 A / 355 kW at 400 V. The four-pole configuration suits demanding multi-circuit control and isolation requirements.

Built to recognised standards, it conforms to IEC/EN 60947-1 and IEC/EN 60947-4-1, with UL 60947-1/-4-1 and CSA C22.2 compliance also listed, plus a Sustainability certification. The AC/DC coil is rated 220…240 V and the mechanical latch is specified 220…240 VDC, providing dependable control in four-pole configurations.

Key Benefits

• High AC1 rating 800 A for robust resistive load switching.
• AC3 630 A / 355 kW at 400 V for large motor duties.
• Four-pole configuration supports multi-circuit control and isolation.
• AC/DC coil rated 220…240 V simplifies control voltage selection.
• Pre-fitted mechanical latch (G495) enables maintained contact operation.
• Conforms to IEC/EN, UL, and CSA 60947 standards for compliance.
• Manufactured by Lovato, with Sustainability certification listed.

Technical Specification

• Type of product: Contactors
• Number of poles: 4
• Type of coil: AC/DC coil
• Rated coil voltage [V]: 220...240
• IEC operating current and power Ie (AC3) 400V [A/Kw]: 630A / 355Kw

What’s Included

• Lovato four-pole contactor 11B6304L00220C220 with mechanical latch (G495)
• Integrated 220…240 V AC/DC coil
• Manufacturer datasheet and documentation
• Compliance and certification information

Applications

• Switching of AC1 resistive loads up to 800 A
• Motor control applications at 400 V AC3 up to 630 A / 355 kW
• Four-pole installations requiring simultaneous multi-circuit switching
• Systems requiring maintained positions via mechanical latch

Safety note: Install and commission only by qualified personnel. Isolate all power before work, follow applicable standards and manufacturer documentation, and verify ratings against the application.