11B400L00110C110 - 3P CONTACTOR 110/125V C/W LATCH 125VDC

Why Choose the 11B400L00110C110?

Lovato 11B400L00110C110 is a three‑pole contactor for demanding motor control and power switching. It uses an AC/DC coil rated 110–125V to suit common control supplies and is already fitted with a mechanical latch (G495) for maintained positions. Designed around IEC AC‑3 duty, it supports high current switching in industrial systems requiring reliable three‑phase control.

Rated Ie (AC‑3) 420A at 400V with 225kW AC‑3 power, this contactor handles substantial loads while meeting key global approvals. It conforms to IEC/EN 60947‑1 and 60947‑4‑1, as well as UL 60947‑1 and UL 60947‑4‑1, plus CSA C22.2 No. 60947‑1 and 60947‑4‑1. A Sustainability certification is listed. Choose the 11B400L00110C110 when a high‑capacity contactor with 110–125V AC/DC coil and integrated mechanical latch is required.

Key Benefits

• AC‑3 Ie 420A at 400V for high current motor switching.
• 225 kW AC‑3 power rating supports substantial three‑phase loads.
• Three‑pole configuration simplifies three‑phase circuit control.
• AC/DC coil operates on 110–125V control supply.
• Pre‑fitted G495 mechanical latch enables maintained contact state.
• Conforms to IEC/EN, UL and CSA 60947 standards.
• Sustainability certification noted for responsible procurement.

Technical Specification

• Type of product: Contactors
• Number of poles: 3
• Type of coil: AC/DC coil
• Rated coil voltage [V]: 110...125
• IEC operating current and power Ie (AC3) 400V [A/Kw]: 420A / 225Kw

What’s Included

• Lovato three‑pole contactor, SKU 11B400L00110C110 (AC/DC coil 110–125V).
• Factory‑fitted mechanical latch G495, 110–125VDC.
• Basic product documentation and compliance information.

Applications

• Three‑phase motor control under AC‑3 duty at 400V.
• Heavy industrial machinery requiring high‑current contactors.
• Motor starters and power switching panels.
• Systems needing maintained contact via mechanical latching.

Safety note: Installation should be performed by qualified personnel. Confirm the 110–125V AC/DC coil and 110–125VDC latch supply, isolate power before work, and follow IEC/EN 60947 and local regulations.