11B115L00110110 - 3P CONTACTOR 110/125V C/W LATCH 110VAC

Why Choose the 11B115L00110110?

Lovato B115 three-pole contactor (SKU 11B115L00110110) delivers dependable switching for demanding control and power applications. Rated 110 A AC-3, it uses an AC/DC coil for 110...125 V operation and is supplied pre-fitted with the G495 mechanical latch for maintained contact position. Screw mounting and solid performance make it a practical choice for panel builders and OEMs.

Designed to IEC/EN 60947-1 and 60947-4-1, with UL and CSA conformity, the B115 offers Ui 1000 V, Uimp 8 kV and Ith 160 A. It boasts a mechanical life of 10,000,000 cycles. Operates from -50 to 70 °C, stores -60 to 80 °C, up to 3000 m altitude, pollution degree 3.

Key Benefits

• 110 A AC-3 rating for dependable motor and load switching.
• AC/DC coil operates on 110...125 V for flexible control supply.
• Pre-fitted G495 mechanical latch for maintained contact position.
• High dielectric strength: Ui 1000 V and Uimp 8 kV.
• Wide operating temperature range from -50 to 70 °C.
• Long mechanical life of 10,000,000 cycles reduces downtime.
• Screw mounting; terminal screws tighten securely to 10 Nm.

Technical Specification

• Product type designation: B115
• Number of poles: 3
• Rated insulation voltage Ui (IEC/EN): 1000 V
• Rated impulse withstand voltage Uimp: 8 kV
• Ith (IEC): 160 A
• Terminal tightening torque: 10 to 10 Nm
• Weight: 5950 g
• Mechanical life: 10000000 cycles
• Operating temperature: -50 to 70 °C
• Storage temperature: -60 to 80 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• Lovato B115 three-pole contactor, pre-fitted mechanical latch G495
• Factory-installed 110...125 VAC/DC coil
• Integrated screw terminals (tightening torque 10 Nm)
• Downloadable product datasheet

Applications

• Motor starting and control under AC-3 duty up to 110 A.
• Industrial control panels requiring three-pole contactors with latching.
• Pumps, fans and conveyors using 110...125 V control supplies.
• Machinery and process equipment built to IEC/EN 60947 requirements.

Safety note: Installation and servicing must be performed by qualified personnel. Isolate all power before work, tighten terminals to 10 Nm, and operate within the specified voltage, temperature and altitude limits in accordance with IEC/EN 60947.