Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1SDA075849R1 is a three-piece FC CuAl front terminal kit for ABB SACE Tmax XT3 circuit breakers, designed for copper and aluminium conductors from 14 to 1/0 AWG in UL/CSA applications.
£40.70
The ABB 1SDA075849R1 is a genuine front terminal kit for copper and aluminium conductors designed for ABB SACE Tmax XT3 moulded case circuit breakers. As part of the ABB SACE Tmax XT / T-Max XT 250 range, the kit provides the appropriate connection hardware for terminating compatible Cu/Al power cables directly at an XT3 circuit breaker.
Designed for conductor sizes from 14 to 1/0 AWG, these FC CuAl terminals support both copper and aluminium conductors. The kit contains three terminals, making it suitable for a three-pole XT3 installation, and provides a purpose-designed ABB connection solution rather than requiring improvised third-party termination hardware.
The 1SDA075849R1 terminal kit is supplied for UL/CSA applications and is identified by ABB as a 1/0 AWG lug accessory for the XT3 frame. Its genuine ABB construction, defined conductor compatibility and three-piece configuration make it a practical choice for panel builders, switchboard manufacturers, OEMs and maintenance applications using compatible Tmax XT3 equipment.
Correct cable termination is essential for dependable low-voltage power distribution. The ABB 1SDA075849R1 kit provides dedicated FC CuAl terminals for connecting compatible copper or aluminium conductors to ABB Tmax XT3 circuit breakers, with a defined 14–1/0 AWG conductor range supporting a variety of panel and switchboard installations.
Using a manufacturer-specified terminal kit helps maintain a consistent mechanical and electrical interface between the conductor and circuit breaker. Supplied as a three-piece set for three-pole applications, the 1SDA075849R1 provides panel builders and maintenance engineers with a genuine ABB connection accessory designed specifically around the XT3 frame.
| Series | SACE Tmax XT / T-Max XT 250 Range |
|---|---|
| Frame compatibility | XT3 |
| Product designation | KIT FC CuAl 14-1/0 AWG XT3 3pcs UL/CSA |
| ABB order code | 1SDA075849R1 |
| Alternate catalogue number | KXT3CUAL1-3PC |
| Product type | Circuit breaker terminal / lug accessory |
| Accessory type | 1/0 AWG lugs |
| Terminal type | FC CuAl front cable terminals |
| Conductor material | Copper / aluminium |
| Conductor size range | 14–1/0 AWG |
| Number of terminals | 3 |
| Suitable number of poles | 3 |
| Terminal mounting torque | 9 Nm / 80 lb-in |
| Cable tightening torque, 8–1/0 AWG | 5.6 Nm / 49 lb-in |
| Cable tightening torque, 14–10 AWG | 2.3 Nm / 20.4 lb-in |
| Standard | UL |
| Certification | UL |
| UPC / EAN | 8015644798260 |
| Weight | approx. 0.55 kg |
The ABB 1SDA075849R1 is a three-piece FC CuAl terminal kit used to connect compatible copper or aluminium power conductors to ABB SACE Tmax XT3 circuit breakers.
The terminals are designed for copper or aluminium conductors ranging from 14 to 1/0 AWG.
The 1SDA075849R1 is supplied as a kit of three terminals, making it suitable for three-pole XT3 applications.
Yes. The CuAl designation identifies the terminals as suitable for compatible copper and aluminium conductors within the specified 14–1/0 AWG cable range.
The terminal kit is specifically designed for the ABB SACE Tmax XT3 frame and is supplied as a three-piece UL/CSA configuration for three-pole applications.
ABB SACE Tmax XT connection accessories provide purpose-designed interfaces for low-voltage circuit breaker installations, helping panel builders, OEMs and maintenance engineers achieve dependable cable termination using components matched to the applicable Tmax XT frame.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.