Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
66.82.9.024.0600 Finder Power relay 2pole 30A DC 24V
66.82.9.024.0600 Finder Power relay 2pole 30A DC 24V.
This product has been discontinued
A direct replacement is available below.
Replacement product
66.82.9.024.4600 Finder Power relay 2pole 30A DC 24V
SKU: 66.82.9.024.4600
£12.50 ex VAT
View
Why Choose the Finder 66.82.9.024.0600 Power Relay?
The Finder 66.82.9.024.0600 is a heavy-duty 30 A industrial electromechanical power relay featuring a 24 V DC coil and two normally open contacts (DPST-NO / 2 NO). Part of the established Finder 66 Series, this relay is designed for dependable high-current switching in industrial machinery, electrical control panels, heating equipment and automation systems.
The relay incorporates two independent normally open contacts, allowing two separate electrical circuits to be switched simultaneously using a single control signal. Its monostable electromagnetic mechanism closes both contacts when the coil is energised and automatically opens them when coil power is removed. The silver-cadmium oxide (AgCdO) contact material supports reliable electrical switching in appropriately rated industrial applications.
With a 24 V DC nominal coil voltage, 30 A rated contact current and 250 V AC resistive contact rating, the Finder 66.82.9.024.0600 offers a practical solution for industrial load control. Its chassis-mounted construction and Faston 250 quick-connect terminals simplify installation into suitable machinery and electrical assemblies. This specific part number is also listed as obsolete by major component distributors, so availability and replacement suitability should be checked before specifying it for new equipment.
Key Advantages
- 30 A rated contact current for demanding industrial switching applications.
- 24 V DC operating coil compatible with suitable industrial DC control circuits.
- Two normally open contacts (DPST-NO / 2 Form A) enable simultaneous switching of two independent circuits.
- 250 V AC rated resistive contact voltage for appropriately rated electrical loads.
- 440 V AC maximum switching voltage, subject to the applicable load ratings.
- 7,500 VA resistive switching capacity at 250 V AC.
- Silver-cadmium oxide (AgCdO) contacts designed for industrial power switching.
- 1.7 W DC coil consumption for integration into suitable control circuits.
- Faston 250 quick-connect terminals support straightforward wiring and servicing.
- Chassis mounting provides secure installation in machinery and electrical equipment.
- Monostable operation automatically opens both contacts when coil power is removed.
- Suitable for industrial automation, heating control, auxiliary power switching and OEM machinery.
Key Features
- Finder 66 Series industrial power relay.
- 24 V DC nominal coil voltage.
- Two normally open contacts (DPST-NO / 2 NO).
- 30 A rated contact current.
- 250 V AC resistive contact rating.
- 440 V AC maximum switching voltage.
- 1.7 W nominal DC coil consumption.
- 340 Ω nominal coil resistance.
- 70.5 mA nominal coil current.
- 19.2 V DC specified operate voltage.
- 2.4 V DC specified release voltage.
- 15 ms operate time.
- 4 ms release time.
- AgCdO contact material.
- Faston 250 quick-connect terminals.
- Chassis / panel mounting.
- −40 to +70 °C operating temperature range.
- Non-latching electromechanical operating mechanism.
Reliable Dual-Pole Power Switching for Industrial Automation
The Finder 66.82.9.024.0600 provides dependable switching of industrial electrical loads through a separate electromagnetic control circuit. When the 24 V DC coil is energised, the relay closes both normally open contacts simultaneously, completing the connected circuits. When coil power is removed, both contacts return to their open positions. This enables a single DC control signal to operate two separate load circuits without carrying the load current directly through the control electronics.
The Finder 66 Series is designed for industrial applications requiring robust power contacts, dependable switching and practical installation. The 66.82.9.024.0600 combines a 30 A contact rating, AgCdO contact material, chassis mounting and Faston 250 connections. It is suitable for maintenance and replacement applications where the original relay specification is required, although its discontinued status means that availability and any proposed substitute should be verified carefully.
Typical Applications
- Industrial automation and electrical control panels.
- Industrial machinery and manufacturing equipment.
- Industrial heating systems, furnaces and ovens.
- Burner, boiler and process heating control equipment.
- Auxiliary motor control and power switching circuits.
- Industrial HVAC and ventilation control equipment.
- Electrical load management and distribution control.
- Manufacturing equipment using 24 V DC control supplies.
- OEM machinery requiring dual normally open power contacts.
- Maintenance and replacement of existing Finder 66 Series relay installations.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Power Relay | |
|---|---|---|
| Terminal Type | Faston / flat-pin | |
| Mounting Type | Panel | |
| Switching Current (A) | 30 A | |
| Manufacturer | Finder | |
| Series | 66 Series Power Relays | |
| Model | 66.82.9.024.0600 | |
| Product type | Electromechanical power relay | |
| Contact configuration | 2 normally open contacts (DPST-NO / 2 Form A) | |
| Number of contacts | 2 normally open contacts | |
| Nominal coil voltage | 24 V DC | |
| Coil supply type | DC | |
| Coil type | Non-latching | |
| Operating principle | Monostable | |
| Nominal coil consumption | 1.7 W | |
| Nominal coil resistance | 340 Ω | |
| Nominal coil current | 70.5 mA | |
| Specified operate voltage | 19.2 V DC | |
| Specified release voltage | 2.4 V DC | |
| Rated contact current | 30 A | |
| Rated resistive AC contact voltage | 250 V AC | |
| Maximum AC switching voltage | 440 V AC | |
| Maximum DC switching voltage | 220 V DC | |
| Resistive AC contact rating | 30 A at 250 V AC | |
| Resistive DC contact rating | 25 A at 24 V DC | |
| Resistive switching capacity at rated AC contact voltage | 7,500 VA | |
| Maximum listed switching load | 13,200 VA, subject to operating conditions | |
| Contact material | Silver-cadmium oxide (AgCdO) | |
| Operate time | 15 ms | |
| Release time | 4 ms | |
| Operating ambient temperature | −40 to +70 °C | |
| Mounting type | Chassis / panel mounting | |
| Terminal arrangement | Quick-connect terminals | |
| Terminal type | Faston 250 | |
| Terminal dimensions | 6.3 × 0.8 mm | |
| Approximate overall dimensions | 68.5 × 33.5 × 31 mm | |
| Listed approvals | CE, cURus, EAC and UKCA | |
| Distributor lifecycle status | Obsolete / discontinued |
Frequently Asked Questions
What is the Finder 66.82.9.024.0600 used for?
The Finder 66.82.9.024.0600 is an industrial electromechanical power relay used for switching electrical loads in machinery, automation systems, heating equipment and electrical control assemblies. It features two normally open contacts rated at 30 A, operated by a 24 V DC coil.
What coil voltage does the Finder 66.82.9.024.0600 require?
The relay uses a 24 V DC nominal coil with a nominal consumption of 1.7 W. Its specified operate voltage is 19.2 V DC, and its nominal coil current is approximately 70.5 mA.
What is the contact rating of the Finder 66.82.9.024.0600?
The relay has two normally open contacts rated at 30 A, with a resistive AC rating of 30 A at 250 V AC and a maximum AC switching voltage of 440 V AC. Permissible switching loads depend on the load type, voltage and operating conditions.
Does the Finder 66.82.9.024.0600 have normally open or changeover contacts?
The Finder 66.82.9.024.0600 has two normally open contacts (DPST-NO / 2 Form A), not changeover contacts. Both contacts close when the 24 V DC coil is energised and open automatically when the coil supply is removed.
Is the Finder 66.82.9.024.0600 still manufactured, and how is it installed?
The Finder 66.82.9.024.0600 is listed as obsolete by major electronic component distributors. It uses chassis mounting and Faston 250 quick-connect terminals measuring 6.3 × 0.8 mm. When replacing an existing relay, confirm availability and check that any alternative matches the required coil, contact, mounting and electrical specifications.
Trusted by Industrial Automation Professionals Worldwide
Finder 66 Series power relays are designed for dependable high-current electrical switching in industrial machinery, automation and electrical control equipment. The Finder 66.82.9.024.0600 combines a 24 V DC coil, two 30 A normally open contacts, AgCdO contact material and chassis-mounted Faston construction, making it a practical specification for maintaining compatible industrial switching systems.
