Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
62.82.9.024.0500 Finder Power relay 2pole 16A DC 24V
Finder 62.82.9.024.0500 is a 16 A two-pole changeover power relay with a 24 V DC coil, rear flange mounting and a physical coil-to-contact separator for SELV applications.
This product has been superseded
A direct replacement is available below.
Replacement product
62.82.9.024.4500 Finder Power relay 2pole 16A DC 24V
SKU: 62.82.9.024.4500
£12.92 ex VAT
View
Why Choose the Finder 62.82.9.024.0500 Power Relay?
The Finder 62.82.9.024.0500 is a robust two-pole electromagnetic power relay designed for dependable switching in industrial control panels, machinery and automation systems. As part of the Finder 62 Series, it combines two changeover contacts with a high switching capacity and a durable rear-flange mounting arrangement.
This relay features a 24 V DC coil and two changeover contacts rated at 16 A. This specific version incorporates a physical separator between the coil and contacts, supporting applications where separation for Safety Extra-Low Voltage circuits is required.
With an AC1 rated load of 4,000 VA and a maximum switching voltage of 400 V AC, the 62.82.9.024.0500 is suitable for demanding industrial control duties. Its rear mounting flange and Faston 250 terminals provide secure panel installation and reliable quick-connect wiring.
Key Advantages
- Heavy-duty two-pole power relay for industrial switching.
- Two changeover contacts allow two circuits to be controlled simultaneously.
- 16 A rated contact current for demanding electrical loads.
- 24 V DC coil compatible with common industrial control systems.
- Physical coil-to-contact separator supports SELV applications.
- Rear flange and Faston 250 terminals support secure panel installation.
Key Features
- Finder 62.82 Series electromagnetic power relay.
- 2 CO (DPDT) contact configuration.
- 16 A rated contact current.
- 24 V DC nominal coil voltage.
- 1.3 W coil power consumption.
- Physical separator between the coil and contacts.
- Rear flange mounting for industrial panels and equipment.
- Faston 250 terminals for direct electrical connection.
Reliable Switching with Enhanced Circuit Separation
Electromagnetic power relays allow a low-power control signal to operate electrically isolated load circuits. The Finder 62.82.9.024.0500 uses a 24 V DC coil to operate two changeover contacts, allowing two separate circuits to switch between normally closed and normally open states.
The physical separator between the coil and contacts provides additional separation for applications involving Safety Extra-Low Voltage control circuits. The rear flange secures the relay to a panel or equipment chassis, while its Faston 250 terminals enable direct quick-connect wiring.
Typical Applications
- Industrial control panels and automation equipment.
- SELV control and switching applications.
- Machinery and production systems.
- Industrial motor-control circuits.
- Burners, boilers, furnaces and heating systems.
- Electrical power-management systems.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Power Relay | |
|---|---|---|
| Terminal Type | Faston / flat-pin | |
| Load Voltage | 400 V AC | |
| Mounting Type | Panel | |
| Switching Current (A) | 16 A | |
| Contacts | 2 C/O | |
| HS Code | 85364900 | |
| Manufacturer | Finder | |
| Series | 62.82 | |
| Model | 62.82.9.024.0500 | |
| Product type | Electromagnetic power relay | |
| Contact configuration | 2 CO (DPDT) | |
| Rated contact current | 16 A | |
| Maximum peak current | 120 A for 5 ms | |
| Rated contact voltage | 250 V AC | |
| Maximum switching voltage | 400 V AC | |
| Rated load AC1 | 4,000 VA | |
| Rated load AC15 at 230 V AC | 750 VA | |
| Motor rating at 230 V AC | 0.8 kW | |
| DC1 switching capacity at 24 / 110 / 220 V DC | 16 / 0.6 / 0.4 A | |
| Minimum switching load | 1,000 mW (10 V / 10 mA) | |
| Nominal coil voltage | 24 V DC | |
| Coil current | 54 mA | |
| Coil power consumption | 1.3 W | |
| Contact material | AgCdO | |
| Operate / release time | 11 / 4 ms | |
| Isolation option | Physical coil-to-contact separator for SELV | |
| Mounting type | Rear flange / panel mounting | |
| Terminal type | Faston 250 | |
| Terminal dimensions | 6.3 × 0.8 mm | |
| Environmental protection | RT I | |
| Operating temperature | −40 to +70 °C |
Frequently Asked Questions
What is the Finder 62.82.9.024.0500 used for?
It is used to switch electrical loads in industrial control panels, machinery and automation systems, including applications requiring additional separation for SELV control circuits.
What coil voltage does this relay require?
The Finder 62.82.9.024.0500 has a nominal 24 V DC coil.
What is the contact configuration?
The relay has two changeover contacts, also described as a 2 CO or DPDT contact configuration, rated at 16 A.
What is the purpose of the physical separator?
The physical separator provides additional separation between the coil and contacts, supporting applications that use Safety Extra-Low Voltage control circuits.
How is the relay mounted and connected?
The relay uses a rear mounting flange for panel installation and Faston 250 terminals measuring 6.3 × 0.8 mm for electrical connections.
Trusted Industrial Relay Technology
Finder 62 Series power relays provide reliable, high-capacity switching for industrial machinery and control panels where secure mounting and appropriate separation for SELV control circuits are essential.
