Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
P2X1011 – AUXILIARY CONTACT 1NO + 1NC
The Lovato P2X1011 auxiliary contact is a side-mount accessory designed to add a reliable 1 changeover (1 C/O) signalling contact to compatible devices.
£20.57
Why Choose the P2X1011?
The Lovato P2X1011 auxiliary contact is a side‑mount accessory designed to add a reliable 1 changeover (1 C/O) signalling contact to compatible devices. With a compact 0.5 DIN module size and a rated current of 6 A, SKU P2X1011 delivers dependable performance in control assemblies. It is intended as an auxiliary contact accessory for P2MB… units, enabling straightforward contact expansion.
Built for demanding environments, this accessory meets IEC/EN/BS 60947-5-1 and offers 4 kV rated impulse withstand voltage (Uimp). Operating temperature from -40 to +70 °C and storage to +80 °C support dependable service across varied conditions. Robust terminals accept a tightening torque of 1 to 1 Nm, while the 40 g construction adds minimal weight to panel installations.
Key Benefits
- Side-mount auxiliary contact expands signalling in a compact form.
- Single changeover (1 C/O) pole for clear status feedback.
- Rated current 6 A supports dependable control-circuit switching.
- Compact 0.5 DIN module size optimises panel space.
- IEC/EN/BS 60947-5-1 compliance for assured reliability.
- 4 kV impulse withstand (Uimp) enhances dielectric strength.
- Wide -40 to +70 °C operating range suits varied environments.
What’s Included
- Side-mount auxiliary contact module (1 C/O)
- Basic installation and safety information
- Manufacturer packaging
Applications
- Adding a 1 C/O auxiliary contact to compatible P2MB… units
- Space-constrained panels requiring a compact 0.5 DIN accessory
- Control circuits needing a 6 A rated auxiliary contact
- Installations requiring IEC/EN/BS 60947-5-1 compliant components
Technical Specifications
| HS Code | 85362010 |
|---|---|
| Product type designation | P1X1011 |
| Rated impulse withstand voltage Uimp | 4 kV |
| Operating temperature | -40 to +70 °C |
| Storage temperature | -40 to +80 °C |
| Terminal tightening torque | 1 to 1 Nm |
| Weight | 40 g |
Frequently Asked Questions
Which devices is the P2X1011 compatible with?
It is an auxiliary contact accessory for P2MB… units. Check your device label for P2MB… compatibility.
How is the auxiliary contact mounted and how much space does it need?
It is side mounted and occupies 0.5 DIN modules.
What is the contact configuration and current rating?
It provides 1 changeover (1 C/O) contact with a rated current of 6 A.
What environmental and electrical withstand ratings does it have?
Operating temperature is -40 to +70 °C with storage to -40 to +80 °C, and Uimp is 4 kV.
Does the P2X1011 meet relevant standards?
Yes, it complies with IEC/EN/BS 60947-5-1 and conforms to IEC/EN 60947-5-1.
Safety note: Installation and wiring should be performed by qualified personnel. Isolate power before work and tighten terminals to 1 to 1 Nm, following applicable standards.
