Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
P1RC2P63AC030 – RES.CURRENT DEV.2P 63A IDN 30MA TYPE AC
Engineered by Lovato, the P1RC2P63AC030 residual current operated circuit breaker delivers dependable AC residual protection in compact form.
Why Choose the P1RC2P63AC030?
Engineered by Lovato, the P1RC2P63AC030 residual current operated circuit breaker delivers dependable AC residual protection in compact form. This 2-module, 2P device is rated 63 A with a 30 mA I∆n for sensitive fault protection. With a rated insulation voltage Ui of 400 V and 4 kV impulse withstand, it integrates easily into DIN rail assemblies while meeting IEC/EN/BS 61008-1 requirements.
Built for reliability, this RCCB offers IP20 frontal protection, robust terminals with 1.8–2 Nm tightening torque, and low 3.78 W max power dissipation per pole. It operates from -35 to +70 °C, stores from -40 to 80 °C, and is suitable up to 2000 m altitude (pollution degree 2). Compact 185 g construction streamlines panel design without compromising performance.
Key Benefits
- Type AC residual protection with 30 mA sensitivity for fault detection.
- 63 A, two-pole configuration for robust circuit isolation.
- Compact 2-module width saves DIN rail and panel space.
- 400 V Ui and 4 kV Uimp enhance insulation reliability.
- Wide -35 to +70 °C operating range suits demanding environments.
- IP20 frontal degree for basic ingress protection.
- Standards compliance to IEC/EN/BS 61008-1 for assured conformity.
- Defined terminal tightening torque 1.8–2 Nm ensures secure connections.
What’s Included
- Residual current operated circuit breaker (2P, 63 A, 30 mA)
- Installation and safety information
- Manufacturer datasheet (online access)
- Protective packaging
Applications
- AC circuits requiring 30 mA residual protection at up to 63 A
- Two-pole protection in DIN rail distribution and control panels
- Installations designed to IEC/EN/BS 61008-1 requirements
- Environments within -35 to +70 °C and up to 2000 m altitude
Technical Specifications
| Rated insulation voltage Ui (IEC/EN) | 400 V |
|---|---|
| Rated impulse withstand voltage Uimp | 4 kV |
| Power dissipation per pole (max) | 3.78 W |
| Operating temperature | -35 to +70 °C |
| Storage temperature | -40 to 80 °C |
| Max altitude | 2000 m |
| Terminal tightening torque | 1.8 to 2 Nm |
| Weight | 185 g |
| IP degree (frontal) | IP20 |
| Pollution degree | 2 |
Frequently Asked Questions
What residual current type and sensitivity does this device provide?
It is type AC with a rated residual current I∆n of 30 mA.
What are the current rating and pole configuration?
It is rated 63 A and has a two-pole (2P) configuration.
Which standards does the P1RC2P63AC030 comply with?
It conforms to IEC/EN/BS 61008-1.
What is the operating temperature range?
The operating range is -35 to +70 °C, with storage from -40 to 80 °C.
What terminal tightening torque is specified?
Tighten terminals to 1.8 to 2 Nm.
Safety note: Install and commission only by a qualified electrician. Isolate power before work, follow IEC/EN/BS 61008-1 and the manufacturer’s instructions, and adhere to all stated ratings and torque values.
