Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
P1RC2P25A030 – RES.CURRENT DEV.2P 25A IDN 30MA TYPE A
The Lovato residual current operated circuit breaker P1RC2P25A030 delivers dependable residual protection in a compact, 2-module format.
Why Choose the P1RC2P25A030?
The Lovato residual current operated circuit breaker P1RC2P25A030 delivers dependable residual protection in a compact, 2‑module format. This 2‑pole, Type A device is rated at 25 A with a 30 mA I∆n, aligning with IEC/EN/BS 61008‑1 requirements. With Ui 400 V and 4 kV impulse withstand, it suits modern distribution assemblies where reliable fault detection and clear, compliant specification are essential.
Engineered for resilience, it operates from -35 to +70 °C and maintains IP20 frontal protection, with performance tested up to 2000 m altitude. Low 0.5 W max power dissipation per pole supports efficient panel design, while secure terminations tighten to 1.8–2 Nm. At just 185 g and 2 DIN modules wide, it integrates neatly into space‑constrained assemblies.
Key Benefits
- Compact 2 DIN‑module width for efficient panel space usage.
- 2‑pole configuration for use on two‑pole circuits.
- Type A residual operation characteristic as specified.
- 25 A rated current supports common circuit requirements.
- 30 mA rated residual current I∆n for clear specification.
- Ui 400 V and 4 kV impulse withstand capability.
- Wide -35 to +70 °C operating temperature range.
- IP20 frontal degree and low 0.5 W per pole dissipation.
What’s Included
- Lovato residual current operated circuit breaker, SKU P1RC2P25A030
- Manufacturer’s documentation (datasheet/specification)
- Protective packaging for transit
Applications
- Type A residual current protection on two‑pole circuits up to 25 A
- Distribution and control assemblies requiring 2 DIN‑module devices
- Installations built to IEC/EN/BS 61008‑1 conformity
- Panels operating in -35 to +70 °C environments
- Projects needing IP20 frontal protection and 400 V insulation rating
Technical Specifications
| Rated insulation voltage Ui (IEC/EN) | 400 V |
|---|---|
| Rated impulse withstand voltage Uimp | 4 kV |
| Power dissipation per pole (max) | 0.5 W |
| Operating temperature | -35 to +70 °C |
| Storage temperature | -40 to 80 °C |
| Max altitude | 2000 m |
| Terminal tightening torque | 1.8 to 2 Nm |
| Weight | 185 g |
| IP degree (frontal) | IP20 |
| Pollution degree | 2 |
Frequently Asked Questions
What are the rated current and residual current values?
The device is rated In 25 A with a 30 mA rated residual current I∆n.
What residual operation type and pole configuration does it have?
It has a Type A residual operation characteristic and a 2‑pole (2P) configuration.
How much DIN‑rail space does it require?
It occupies 2 DIN modules in width.
Which standards does this breaker conform to?
It conforms to IEC/EN/BS 61008‑1 and lists IEC compliance.
What environmental and installation ratings should I note?
Operating range is -35 to +70 °C with IP20 frontal protection and max altitude 2000 m. Terminal tightening torque is 1.8 to 2 Nm.
Safety note: Install and commission only by a qualified person. Isolate all power sources before work, observe the specified torque and ratings, and comply with IEC/EN/BS 61008‑1 and local regulations.
