Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ002084B0000 ABB PTBO1431 System pro E Power IP65 Open Bottom W1000 D300
ABB PTBO1431 (1STQ002084B0000) System pro E Power IP65-designated open-bottom enclosure accessory for compatible low-voltage electrical switchboards, specified for a nominal width of 1000 mm, a 600 mm + 400 mm configuration and an enclosure depth of 300 mm.
Why Choose the ABB PTBO1431 System pro E Power IP65 Open Bottom?
The ABB PTBO1431 (1STQ002084B0000) is a purpose-designed IP65 open-bottom enclosure accessory for compatible low-voltage electrical distribution switchboards. Part of the ABB System pro E Power series, this component is specified for a nominal 1000 mm width, incorporating a 600 mm + 400 mm configuration, and a 300 mm enclosure depth.
The PTBO1431 is intended for integration into the lower section of compatible modular electrical enclosures. Its open-bottom arrangement provides a designated opening at the base of the switchboard, supporting suitable cable-entry and installation configurations. As part of the System pro E Power range, it is designed to work with coordinated ABB enclosure components for professional electrical distribution panel construction.
Specified for IP65 enclosure configurations, the PTBO1431 is suitable for selected System pro E Power assemblies requiring a 1000 mm nominal width and 300 mm depth. The manufacturer's 600 mm + 400 mm designation identifies the associated width configuration. The final ingress-protection rating depends on the complete enclosure assembly, including appropriate sealing, cable-entry components and installation.
Key Advantages
- Genuine ABB System pro E Power open-bottom enclosure accessory for compatible modular switchboards.
- Designed for IP65 enclosure configurations when correctly integrated into a complete assembly.
- 1000 mm nominal width suitable for the specified enclosure arrangement.
- 300 mm nominal enclosure depth for compatible shallow-depth switchboard structures.
- 600 mm + 400 mm width configuration identified by the manufacturer.
- Open-bottom design supports appropriately engineered lower cable-entry arrangements.
- Supports modular construction using coordinated ABB enclosure components.
- Suitable for professional electrical panel builders, switchboard manufacturers and industrial system integrators.
Key Features
- ABB System pro E Power modular electrical enclosure accessory.
- PTBO1431 manufacturer product designation.
- 1STQ002084B0000 ABB order code.
- IP65-designated open-bottom component for compatible enclosure assemblies.
- 1000 mm nominal enclosure width.
- 300 mm nominal enclosure depth.
- 600 mm + 400 mm manufacturer width configuration.
- CC manufacturer configuration designation.
- Designed for installation at the bottom of compatible modular switchboard structures.
- Provides a designated lower enclosure opening for suitable installation arrangements.
- Intended for use as part of a complete ABB System pro E Power electrical enclosure assembly.
Technical Specifications
- Manufacturer: ABB
- Series: System pro E Power
- Model: PTBO1431
- ABB order code: 1STQ002084B0000
- SKU / MPN: 1STQ002084B0000
- Product type: Open-bottom enclosure accessory
- Accessory category: Electrical enclosure bottom components
- Bottom configuration: Open
- Designated protection class: IP65 enclosure configuration
- Nominal enclosure width: 1000 mm
- Width configuration: 600 mm + 400 mm
- Nominal enclosure depth: 300 mm
- Manufacturer configuration suffix: CC
- Application: Low-voltage electrical distribution enclosures
- Compatible product range: ABB System pro E Power
- Installation position: Bottom of compatible enclosure assembly
- Installation type: Mechanical integration into a modular electrical enclosure
- Product function: Open-bottom enclosure arrangement
Reliable Enclosure Integration for Industrial Power Distribution
Modular electrical distribution switchboards require carefully coordinated structural components to accommodate switching equipment, protective devices, wiring and cable-entry arrangements. Bottom enclosure accessories form part of this construction system, defining the lower section of the cabinet and its mechanical interfaces with other enclosure components.
The ABB PTBO1431 provides an open-bottom solution for selected System pro E Power configurations. Its nominal 1000 mm width and 300 mm depth identify the intended enclosure dimensions, while the 600 mm + 400 mm designation specifies the corresponding width arrangement. This configuration is distinct from other PTBO accessories intended for different enclosure depths or width combinations.
The IP65 classification denotes protection against dust ingress and water jets under the relevant enclosure testing conditions. However, an open-bottom component does not independently provide an IP65 rating. The completed switchboard must incorporate suitable sealing, cable-entry provisions and compatible enclosure components to achieve the specified degree of protection.
The ABB System pro E Power series offers a modular approach to low-voltage electrical distribution assemblies, incorporating enclosure structures, mounting components and accessories for professional panel building. The PTBO1431 should be installed according to the relevant ABB technical documentation, with particular attention to the bottom opening, enclosure compatibility and required environmental protection.
Typical Applications
- ABB System pro E Power modular electrical enclosures.
- Low-voltage main distribution switchboards.
- Industrial electrical power distribution cabinets.
- Compatible IP65 electrical enclosure configurations.
- Switchboards requiring an open-bottom enclosure arrangement.
- Electrical installations with appropriately designed bottom cable entry.
- Commercial building electrical distribution systems.
- Modular switchboard structures with a nominal 300 mm enclosure depth.
- OEM electrical panel manufacturing and switchboard assembly.
- Maintenance and replacement of matching ABB enclosure bottom accessories.
Frequently Asked Questions
What is the ABB PTBO1431 (1STQ002084B0000) used for?
The ABB PTBO1431 is an open-bottom enclosure accessory designed for compatible ABB System pro E Power low-voltage electrical distribution switchboards. It provides a designated bottom opening within the enclosure assembly.
What enclosure dimensions is the PTBO1431 designed for?
The PTBO1431 is specified for a nominal 1000 mm width and 300 mm enclosure depth, with a 600 mm + 400 mm width configuration. These values describe its intended enclosure arrangement rather than the confirmed physical dimensions of the individual accessory.
Does the ABB PTBO1431 provide IP65 protection?
The PTBO1431 is designated for IP65 enclosure configurations. The accessory does not independently guarantee IP65 protection, as the final rating depends on the complete enclosure assembly, including appropriate sealing, cable-entry provisions and installation.
What is the difference between the ABB PTBO1431 and PTBO1291?
Both products are System pro E Power IP65-designated open-bottom accessories with a nominal 1000 mm width. The PTBO1431 is specified for a 600 mm + 400 mm configuration and 300 mm depth, while the PTBO1291 is specified for a 600 mm + 200 mm configuration and 900 mm depth.
Which ABB enclosure system is compatible with the PTBO1431?
The PTBO1431 belongs to the ABB System pro E Power product range. Compatibility with a particular switchboard structure should be verified using ABB's configuration documentation and assembly instructions before installation.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power provides modular enclosure solutions for professional low-voltage electrical distribution switchboards. The PTBO1431 open-bottom accessory supports compatible IP65 enclosure configurations through its dedicated bottom arrangement, nominal 1000 mm width, 600 mm + 400 mm configuration and 300 mm depth, helping panel builders construct coordinated electrical distribution assemblies.
