ETE MV500P1S1 Multi-Voltage Control Transformer 500VA 10/0/220/240V to 0/55/110V

Why Choose the ETE MV500P1S1 500 VA Multi-Voltage Control Transformer?

The ETE MV500P1S1 is a 500 VA single-phase multi-voltage control transformer designed for industrial electrical installations requiring flexible primary voltage connections and selectable secondary control voltages. Part of the ETE MV multi-voltage transformer series, it features 10/0/220/240 V primary terminals and 0/55/110 V secondary terminals, providing a practical solution for applications requiring nominal 55 V AC or 110 V AC control power.

The MV500P1S1 supports 220 V and 240 V primary voltage selections through its appropriately marked terminals, while the secondary winding offers selectable 55 V or 110 V output taps. This flexibility makes the transformer suitable for industrial control panels, machinery installations, automation systems and electrical equipment requiring compatible AC control voltages.

The primary winding also incorporates a 10 V adjustment tap, providing an additional connection facility within the multi-voltage arrangement. The correct use of this adjustment tap and the required primary terminal connections must be confirmed with ETE before installation. The terminal markings alone should not be used to assume an unverified voltage adjustment or wiring configuration.

With Class E insulation, 8% voltage regulation, dimensions of 120 × 120 × 120 mm and a weight of 6.2 kg, the ETE MV500P1S1 offers a compact, versatile control transformer solution. Its associated enclosure references are EPH 3 or EPN 2, supporting suitable enclosure selection during electrical panel design.

Key Advantages

• 500 VA rated capacity: Provides dedicated AC power for compatible industrial control circuits and electrical equipment.
• Multi-voltage primary arrangement: Incorporates 10/0/220/240 V terminals for the manufacturer's specified connection configurations.
• 220 V AC primary selection: Supports compatible electrical supplies using the appropriate primary terminals.
• 240 V AC primary selection: Provides an alternative nominal input connection for suitable installations.
• 55 V AC secondary output: Supports industrial control equipment requiring a compatible 55 V AC supply.
• 110 V AC secondary output: Provides an alternative output for compatible 110 V AC control circuits.
• 10 V primary adjustment tap: Offers an additional primary connection facility, subject to confirmation with ETE.
• Single-phase construction: Suitable for dedicated AC control voltage transformation.
• Class E insulation: Provides a defined thermal insulation classification.
• 8% voltage regulation: Provides a specified indication of secondary voltage variation under changing load conditions.
• Compact dimensions: The 120 × 120 × 120 mm format assists with electrical panel layout planning.
• 6.2 kg weight: Allows suitable mechanical support and mounting arrangements to be specified.
• EPH 3 or EPN 2 enclosure references: Help identify associated enclosure options for installation planning.
• Selectable secondary taps: Allow one transformer model to accommodate either supported nominal control voltage.

Key Features

• ETE MV multi-voltage control transformer series.
• 500 VA rated apparent power.
• 0.5 kVA transformer capacity.
• Single-phase transformer configuration.
• Primary terminal arrangement: 10/0/220/240 V.
• Nominal primary voltage selections: 220 V and 240 V AC.
• Primary adjustment tap: 10 V.
• Primary connection requirement: Confirm correct adjustment tap connections with ETE.
• Secondary terminal arrangement: 0/55/110 V.
• Secondary output option 1: 55 V AC.
• Secondary output option 2: 110 V AC.
• Secondary output selection: Appropriate 55 V or 110 V tap connection.
• Insulation class: E.
• Specified voltage regulation: 8%.
• Length: 120 mm.
• Width: 120 mm.
• Height: 120 mm.
• Weight: 6.2 kg.
• Associated enclosure references: EPH 3 or EPN 2.
• Suitable for appropriately designed industrial electrical installations requiring a 55 V or 110 V AC control supply.

Flexible 55 V and 110 V AC Control Power for Industrial Applications

The ETE MV500P1S1 provides a practical solution for industrial installations requiring dedicated AC control power from a compatible 220 V or 240 V supply. Its 10/0/220/240 V primary terminal arrangement allows selection of the appropriate nominal primary voltage, while the 0/55/110 V secondary terminals provide two control voltage options for compatible connected equipment.

The 55 V AC output can be selected using the appropriate secondary tap for compatible industrial control circuits. Alternatively, the 110 V AC output supports equipment designed for that nominal supply voltage. Both options are derived from the transformer's tapped secondary winding, and the 500 VA rating applies to the transformer as a whole. The output taps should not be treated as two independently rated 500 VA supplies, and simultaneous loading of both taps should not be assumed without manufacturer confirmation.

The 10 V primary adjustment tap provides an additional connection facility within the primary winding arrangement. Because the terminals are marked 10/0/220/240 V, the correct use of the adjustment tap must be confirmed with ETE before the transformer is energised. Incorrect primary connections may result in unsuitable secondary voltages or damage to connected equipment. Installation should follow the manufacturer's approved connection diagram rather than assumptions based solely on terminal markings.

At the rated 500 VA capacity, the calculated secondary current is approximately 9.09 A at 55 V AC or 4.55 A at 110 V AC. These figures are calculated by dividing the apparent power rating by the nominal secondary voltage and are not separately verified manufacturer current ratings. The actual current capability must also be considered alongside the selected tap arrangement, winding limits, connected load characteristics and manufacturer's instructions.

The specified 8% voltage regulation is relevant when evaluating secondary voltage variation between load conditions. Actual output voltage depends on the selected primary connection, incoming supply voltage and connected load. Control relays, contactor coils, solenoids and other inductive devices may also introduce starting or inrush requirements, so both continuous apparent power and short-duration operating demands should be considered when selecting the transformer.

With Class E insulation, dimensions of 120 × 120 × 120 mm and a weight of 6.2 kg, the MV500P1S1 can be incorporated into appropriately engineered industrial control assemblies. Its EPH 3 or EPN 2 enclosure references assist with enclosure planning. Suitable mechanical support, primary and secondary circuit protection, conductor sizing, ventilation and electrical clearances should be provided in accordance with ETE installation instructions and applicable electrical requirements.

Typical Applications

• Industrial control circuits requiring a nominal 55 V AC supply.
• Industrial control circuits requiring a nominal 110 V AC supply.
• Electrical control panels with compatible 220 V or 240 V primary supplies.
• Industrial machinery and OEM automation equipment.
• Motor control panels requiring dedicated AC control power.
• Control relays and contactors with compatible AC coil voltages.
• Industrial signalling and indication circuits.
• Machinery electrical cabinets and control enclosures.
• Industrial process control equipment with suitable AC loads.
• Electrical panel building and automation system integration.
• Control transformer replacement and maintenance projects.
• Equipment requiring selectable 55 V or 110 V AC control voltages.
• Industrial control circuit upgrades requiring a 500 VA multi-voltage transformer.