ETE MV150P1S3 Multi-Voltage Control Transformer 150VA 10/0/220/240V to 0/12V + 0/12V

Why Choose the ETE MV150P1S3 150 VA Multi-Voltage Control Transformer?

The ETE MV150P1S3 is a versatile 150 VA single-phase multi-voltage control transformer designed for industrial electrical systems requiring a selectable 12 V AC or 24 V AC secondary supply. Part of the ETE MV Multi-Voltage Series, this transformer combines a multi-tap primary winding with two 12 V secondary windings that can be connected in parallel or series to suit different control circuit requirements.

Featuring 10/0/220/240 V primary terminals and 0/12 V + 0/12 V secondary terminals, the MV150P1S3 offers flexible voltage configuration for electrical panel builders, machinery manufacturers and automation engineers. The secondary windings can be connected in parallel for a nominal 12 V AC output or in series for a nominal 24 V AC output, subject to correct winding polarity and the manufacturer's connection instructions.

With a 150 VA rated capacity, Class E insulation and 10% voltage regulation, the transformer is suited to appropriately rated industrial control circuits. It measures 96 × 76 × 103 mm, weighs 2.3 kg and has specified enclosure references of EPH 2 or EPN 1.

Important installation note: The primary terminal arrangement includes a 10 V adjustment tap. The exact primary connections and adjustment method must be confirmed with ETE before installation. The two secondary windings must also be connected with the correct polarity when configuring series or parallel operation.

Key Advantages

• Selectable 12 V or 24 V AC output: Two secondary windings support parallel or series connection for different control voltage requirements.
• 150 VA rated capacity: Suitable for appropriately sized low-voltage control and signalling circuits.
• Multi-voltage primary: Features a 10/0/220/240 V primary terminal arrangement.
• 10 V primary adjustment tap: Provides an additional primary connection feature, with exact wiring subject to ETE confirmation.
• Flexible secondary configuration: Parallel connection provides 12 V AC, while series connection provides 24 V AC.
• Class E insulation: Provides a defined insulation classification for industrial transformer applications.
• 10% voltage regulation: Allows designers to account for secondary voltage variation under changing loads.
• Continuous-rated construction: Suitable for sustained industrial control circuit operation within specified conditions.
• IP20 touch-proof terminals: Help reduce accidental contact with electrical connections.
• Class H varnish impregnation: Supports durable transformer winding construction.
• Protective core earth connection: Facilitates appropriate protective earthing.
• Compact dimensions: Measures 96 × 76 × 103 mm for installation within electrical panels.
• DIN rail mounting option: Offers flexibility for compatible panel mounting arrangements.
• Enclosure options: Specified references EPH 2 or EPN 1.

Key Features

• ETE MV Multi-Voltage Series control transformer.
• 150 VA rated apparent power.
• Single-phase transformer configuration.
• 10/0/220/240 V primary terminal arrangement.
• 10 V primary adjustment tap requiring manufacturer connection confirmation.
• 0/12 V + 0/12 V dual secondary winding arrangement.
• 12 V AC nominal output with correctly phased parallel secondary windings.
• 24 V AC nominal output with correctly phased series secondary windings.
• 50/60 Hz operating frequency.
• Class E insulation system.
• 10% specified voltage regulation.
• Continuous-rated industrial control transformer construction.
• IP20 touch-proof electrical terminals.
• Class H varnish-impregnated windings.
• Protective core earth connection.
• Designed to EN 61558-1.
• Specified ambient temperature range of −10 to +35 °C.
• DIN rail mounting option.
• 96 × 76 × 103 mm overall dimensions.
• 2.3 kg product weight.
• EPH 2 or EPN 1 enclosure references.

Multi-Voltage Primary Connections with a 10 V Adjustment Tap

The ETE MV150P1S3 features a 10/0/220/240 V primary winding arrangement, designed to accommodate the manufacturer's specified primary voltage connections. This makes it suitable for industrial control panel designs where nominal 220 V AC or 240 V AC supplies may be encountered.

The primary also incorporates a 10 V adjustment tap. This connection feature must be interpreted according to the manufacturer's wiring diagram rather than assumed from the terminal labels alone. Confirm the correct primary connections and the purpose of the 10 V adjustment tap directly with ETE before energising the transformer.

Correct primary voltage selection is essential to obtain the intended secondary voltage and prevent incorrect winding excitation. The primary connections are alternatives for the appropriate supply arrangement and must not be treated as independent simultaneous supply inputs.

Dual 12 V Secondary Windings for Series or Parallel Operation

A key feature of the ETE MV150P1S3 multi-voltage transformer is its pair of 0/12 V secondary windings. These windings provide flexibility for control circuits operating at either 12 V AC or 24 V AC without requiring separate transformer models for each nominal voltage.

12 V AC Parallel Connection

When the two 12 V secondary windings are connected correctly in parallel, the transformer provides a nominal 12 V AC output. Based on the total 150 VA rating, the calculated full-load output current is approximately 12.5 A. Parallel connection requires the correct winding polarity and matching secondary voltages; incorrect connections can cause excessive circulating currents and damage.

24 V AC Series Connection

When the two 12 V secondary windings are connected in the correct series-aiding configuration, their voltages combine to provide a nominal 24 V AC output. At 150 VA, the calculated full-load secondary current is approximately 6.25 A. This configuration is useful for appropriately rated 24 V AC relays, contactors, actuators and industrial control equipment.

Connection guidance: The manufacturer's winding polarity markings and wiring diagram must be followed for both series and parallel arrangements. The calculated current figures assume the full transformer rating is available in the selected configuration; confirm permissible winding loading and protective arrangements with ETE where required.

Compact Industrial Construction and Installation Flexibility

The MV150P1S3 measures 96 mm in length, 76 mm in width and 103 mm in height, with a weight of 2.3 kg. These dimensions make it suitable for integration into industrial electrical control panels, machinery cabinets and appropriately sized distribution enclosures.

ETE specifies Class E insulation, Class H varnish impregnation, IP20 touch-proof terminals and a protective core earth connection. The transformer is designed to EN 61558-1 for continuous-rated control circuit applications, with an ambient operating temperature range of −10 to +35 °C.

A DIN rail mounting option is available for this transformer size, providing flexibility for suitable panel layouts. The specified enclosure references are EPH 2 or EPN 1. Installation should incorporate appropriate mounting support, ventilation, conductor sizing, overcurrent protection and protective earthing.

Typical Applications

• Industrial control panels requiring a 12 V AC or 24 V AC supply.
• Electrical machinery with selectable low-voltage control circuits.
• 24 V AC contactor and relay coil circuits.
• 12 V AC control and signalling equipment.
• Industrial automation and machine control systems.
• Motor starter and control assemblies.
• OEM electrical equipment and machinery manufacturing.
• Factory production and processing machinery.
• Electrical panel building and system integration.
• Industrial switching and signalling applications.
• Control transformer replacement and machinery refurbishment.
• Applications requiring dual 12 V secondary windings with series or parallel connection options.