Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ETE MV1500P2S3 Multi-Voltage Control Transformer 1500VA 20/0/380/420V to 0/12V + 0/12V
ETE MV1500P2S3 is a 1500 VA single-phase multi-voltage control transformer with 20/0/380/420 V primary terminals, dual 12 V secondary windings configurable for 12 V parallel or 24 V series output, Class E insulation and 4% voltage regulation.
£150.75
Why Choose the ETE MV1500P2S3 Multi-Voltage Control Transformer?
The ETE MV1500P2S3 is a robust 1500 VA (1.5 kVA) single-phase multi-voltage control transformer designed to provide reliable low-voltage AC power for industrial machinery, electrical control panels and automation systems. Part of the ETE MV multi-voltage control transformer range, it combines a multi-terminal primary winding with two separate secondary windings for flexible control voltage configuration.
The transformer features 20/0/380/420 V primary terminals and two 0/12 V secondary windings. These secondary windings can be connected in parallel to provide a nominal 12 V AC output or in series to provide a nominal 24 V AC output. This flexibility makes the MV1500P2S3 suitable for compatible industrial installations requiring different low-voltage AC control supplies.
With a rated apparent power of 1500 VA, Class E insulation and 4% voltage regulation, the MV1500P2S3 provides a practical solution for appropriately selected control circuit loads. Its dimensions of 150 × 151 × 145 mm and weight of 14.2 kg should be considered during installation. The transformer also incorporates a 20 V primary adjustment tap, with the correct connections to be confirmed with ETE.
Key Advantages
- Robust 1500 VA single-phase multi-voltage control transformer for industrial applications.
- 380/420 V primary voltage terminals for compatible industrial AC supplies.
- Dual 12 V secondary windings provide flexible output configurations.
- 12 V AC parallel or 24 V AC series output for compatible control equipment.
- 20 V primary adjustment tap for manufacturer-specified voltage adjustment.
- Provides electrical isolation between primary and secondary windings.
- Class E insulation for dependable electrical insulation performance.
- 4% voltage regulation as specified for this transformer model.
- Higher apparent-power capacity for suitably selected industrial control loads.
- EPN 4 enclosure reference for identifying an appropriate enclosure arrangement.
Key Features
- ETE MV multi-voltage control transformer series.
- 1500 VA (1.5 kVA) rated apparent power.
- Single-phase transformer construction.
- Primary terminals: 20/0/380/420 V.
- 380/420 V primary voltage terminals.
- 20 V primary adjustment tap; confirm connections with ETE.
- Secondary terminals: 0/12 V + 0/12 V.
- 12 V AC output with parallel-connected secondary windings.
- 24 V AC output with series-connected secondary windings.
- Class E insulation system.
- 4% voltage regulation.
- 150 × 151 × 145 mm dimensions.
- 14.2 kg transformer weight.
- EPN 4 enclosure reference.
Flexible 12 V and 24 V AC Power for Industrial Control Systems
The ETE MV1500P2S3 converts a compatible industrial AC supply into a lower voltage suitable for electrical control circuits, machinery and automation equipment. Its primary winding incorporates terminals marked 20/0/380/420 V, while its secondary side provides two separate 12 V windings. This arrangement supports different low-voltage AC output configurations without changing the transformer model.
The secondary windings can be connected in parallel for a nominal 12 V AC output or in series for a nominal 24 V AC output. Correct winding polarity must be observed, particularly when connecting windings in parallel. The 1500 VA rating applies to the total rated secondary loading, so connected equipment must remain within the transformer's specified capacity.
The MV1500P2S3 also features a 20 V primary adjustment tap for the manufacturer's specified connection arrangement. The exact terminal connections must be confirmed with ETE before energising the transformer. Its Class E insulation, 4% voltage regulation and robust construction make it suitable for appropriately designed industrial electrical control panels with adequate protection, mounting and ventilation.
Typical Applications
- Industrial electrical control panels requiring 12 V or 24 V AC supplies.
- Machine control circuits and industrial automation systems.
- Compatible AC relays, contactors and switching equipment.
- Manufacturing and production machinery.
- Packaging, conveying and material handling systems.
- Motor control centres and industrial machinery cabinets.
- Low-voltage AC control and signalling circuits.
- OEM machine building and electrical panel manufacturing.
- Industrial maintenance and replacement transformer installations.
Technical Specifications
Tick the specs you need, then view products that match.
| Rated Power (VA) | 1500 VA | |
|---|---|---|
| Primary Voltage | 20/0/380/420V | |
| Secondary Voltage | 0/12V + 0/12V | |
| Phase | Single Phase | |
| Manufacturer | ETE | |
| Series | MV Multi-Voltage Control Transformers | |
| Model | MV1500P2S3 | |
| Product type | Industrial multi-voltage control transformer | |
| Transformer type | Single-phase | |
| Rated apparent power | 1500 VA (1.5 kVA) | |
| Primary terminals | 20/0/380/420 V | |
| Primary voltage terminals | 380/420 V | |
| Primary adjustment tap | 20 V | |
| Primary connection note | Confirm adjustment tap connections with ETE | |
| Secondary terminals | 0/12 V + 0/12 V | |
| Secondary winding arrangement | Dual 12 V windings | |
| Parallel output connection | 12 V AC | |
| Series output connection | 24 V AC | |
| Insulation class | E | |
| Voltage regulation | 4% | |
| Length | 150 mm | |
| Width | 151 mm | |
| Height | 145 mm | |
| Dimensions (L × W × H) | 150 × 151 × 145 mm | |
| Weight | 14.2 kg | |
| Enclosure reference | EPN 4 | |
| Product range reference | ETE Stock Control Transformer Range, March 2026 |
Frequently Asked Questions
What is the ETE MV1500P2S3 used for?
The ETE MV1500P2S3 is a 1500 VA single-phase multi-voltage control transformer designed to provide 12 V or 24 V AC power for compatible industrial machinery, electrical control circuits and automation equipment.
What primary terminals does the MV1500P2S3 have?
The transformer features 20/0/380/420 V primary terminals, including a 20 V adjustment tap. The correct primary connections must be confirmed with ETE.
Can the MV1500P2S3 provide both 12 V and 24 V AC?
Yes. Its two separate 0/12 V secondary windings can be connected in parallel for 12 V AC or in series for 24 V AC, observing the correct winding polarity.
What is the purpose of the 20 V primary adjustment tap?
The 20 V primary adjustment tap is provided for the manufacturer's specified voltage adjustment arrangement. Its exact terminal connections must be confirmed with ETE before installation.
What are the rated power, dimensions and enclosure reference?
The MV1500P2S3 is rated at 1500 VA (1.5 kVA), measures 150 × 151 × 145 mm, weighs 14.2 kg and has an EPN 4 enclosure reference.
Dependable Multi-Voltage Control Transformers for Industrial Machinery
The ETE MV multi-voltage control transformer range provides flexible AC voltage transformation for industrial electrical systems. The MV1500P2S3 combines a 1500 VA rating, dual 12 V secondary windings, configurable 12 V or 24 V AC outputs and 4% voltage regulation to support reliable machinery control and automation applications.
Why Choose the ETE MV2500P2S2 Multi-Voltage Control Transformer?
The ETE MV2500P2S2 is a heavy-duty 2500 VA (2.5 kVA) single-phase multi-voltage control transformer designed for industrial machinery, electrical control panels and automation installations requiring a higher-capacity AC control power supply. Part of the ETE MV multi-voltage control transformer range, it features multi-terminal primary and secondary windings for a manufacturer-specified tapped voltage transformation arrangement.
The transformer incorporates 20/0/380/420 V primary terminals and 10/0/220/240 V secondary terminals. Its output connection is specified as a tapped output per datasheet, meaning the correct secondary terminal arrangement must be determined from ETE's technical documentation. A 10 V adjustment tap is also specified, with terminal connections requiring confirmation with ETE.
With a rated apparent power of 2500 VA, Class E insulation and 3% voltage regulation, the MV2500P2S2 provides a practical solution for appropriately selected industrial control loads. Its dimensions of 192 × 161 × 185 mm and weight of 24 kg should be considered when specifying mounting arrangements and electrical enclosures. The associated enclosure reference is EPN 5.
Key Advantages
- Heavy-duty 2500 VA (2.5 kVA) single-phase control transformer.
- 20/0/380/420 V primary terminals for manufacturer-specified industrial supply connections.
- 10/0/220/240 V secondary terminals for a tapped output arrangement.
- Higher apparent-power capacity for appropriately selected industrial control loads.
- 10 V adjustment tap, with connections to be confirmed with ETE.
- Provides electrical isolation between primary and secondary windings.
- Class E insulation for dependable electrical insulation performance.
- 3% voltage regulation as specified for this model.
- Robust construction suitable for industrial electrical installations.
- EPN 5 enclosure reference for identifying an appropriate enclosure arrangement.
Key Features
- ETE MV multi-voltage control transformer series.
- 2500 VA (2.5 kVA) rated apparent power.
- Single-phase transformer construction.
- Primary terminals: 20/0/380/420 V.
- Secondary terminals: 10/0/220/240 V.
- Tapped secondary output according to the manufacturer's datasheet.
- 10 V adjustment tap; confirm terminal connections with ETE.
- Class E insulation system.
- 3% voltage regulation.
- 192 mm length, 161 mm width and 185 mm height.
- 24 kg transformer weight.
- EPN 5 enclosure reference.
Technical Specifications
- Manufacturer: ETE
- Series: MV Multi-Voltage Control Transformers
- Model: MV2500P2S2
- Product type: Industrial multi-voltage control transformer
- Transformer type: Single-phase
- Rated apparent power: 2500 VA (2.5 kVA)
- Primary terminals: 20/0/380/420 V
- Secondary terminals: 10/0/220/240 V
- Output connection: Tapped output per datasheet
- Adjustment tap: 10 V
- Connection note: Confirm terminal connections with ETE
- Insulation class: E
- Voltage regulation: 3%
- Length: 192 mm
- Width: 161 mm
- Height: 185 mm
- Dimensions (L × W × H): 192 × 161 × 185 mm
- Weight: 24 kg
- Enclosure reference: EPN 5
- Product range reference: ETE Stock Control Transformer Range, March 2026
Higher-Capacity Tapped Voltage Transformation for Industrial Control Systems
The ETE MV2500P2S2 is designed to transform an incoming AC supply into a manufacturer-specified secondary voltage for industrial machinery and electrical control systems. Its primary winding features terminals marked 20/0/380/420 V, while its secondary winding features terminals marked 10/0/220/240 V. The transformer must be connected in accordance with the correct ETE technical documentation.
The MV2500P2S2 is specified with a tapped output per datasheet. The correct output terminal selection must therefore be confirmed rather than inferred solely from the terminal markings. The specified 10 V adjustment tap also requires confirmation of its function and connections with ETE before installation or energisation.
Its 2500 VA (2.5 kVA) apparent-power rating provides capacity for appropriately selected industrial control circuit loads. The transformer also features Class E insulation and 3% voltage regulation. At 24 kg, suitable mechanical support, secure mounting, electrical protection and adequate enclosure ventilation are important installation considerations.
Typical Applications
- Industrial electrical control panels requiring tapped AC voltage transformation.
- Machinery control circuits and industrial automation systems.
- Compatible industrial control equipment selected for the manufacturer's output configuration.
- Motor control centres and electrical machinery cabinets.
- Manufacturing and production machinery.
- Packaging, conveying and material handling equipment.
- OEM machine building and industrial electrical panel manufacturing.
- Industrial maintenance and replacement transformer installations.
Frequently Asked Questions
What is the ETE MV2500P2S2 used for?
The ETE MV2500P2S2 is a 2500 VA single-phase multi-voltage control transformer designed for tapped AC voltage transformation in compatible industrial machinery and electrical control systems.
What are the primary and secondary terminals?
The transformer features 20/0/380/420 V primary terminals and 10/0/220/240 V secondary terminals. The correct connections must follow ETE's technical documentation.
How is the MV2500P2S2 secondary output connected?
The transformer uses a tapped output per datasheet. The required terminal selection must be confirmed with ETE rather than assumed from the terminal markings.
What is the purpose of the 10 V adjustment tap?
The transformer includes a 10 V adjustment tap. Its exact function and terminal connections must be confirmed with ETE before installation.
What are the power rating, dimensions and enclosure reference?
The MV2500P2S2 is rated at 2500 VA (2.5 kVA), measures 192 × 161 × 185 mm, weighs 24 kg and has an EPN 5 enclosure reference.
Robust Tapped Control Transformers for Industrial Electrical Systems
The ETE MV multi-voltage control transformer range provides flexible AC voltage transformation for industrial electrical installations. The MV2500P2S2 combines a 2500 VA rating, tapped secondary terminals and 3% voltage regulation for industrial machinery and control panel applications where connections are established from ETE's technical documentation.
Why Choose the ETE MV3000P2S1 Multi-Voltage Control Transformer?
The ETE MV3000P2S1 is a heavy-duty 3000 VA (3 kVA) single-phase multi-voltage control transformer designed to provide reliable AC control power for industrial machinery, electrical control panels and automation systems. As part of the ETE MV multi-voltage control transformer range, it features a multi-terminal primary winding and selectable secondary voltage taps for flexible industrial electrical installations.
The transformer incorporates 20/0/380/420 V primary terminals and 0/55/110 V secondary terminals, allowing selection of either a nominal 55 V or 110 V AC output. This configuration makes the MV3000P2S1 suitable for compatible industrial control equipment requiring a dedicated AC supply at one of these voltages.
With a rated apparent power of 3000 VA, Class E insulation and 3% voltage regulation, the MV3000P2S1 provides a practical solution for higher-capacity industrial control circuit applications. Its dimensions of 192 × 189 × 185 mm and weight of 28 kg should be considered when designing the installation. A 20 V primary adjustment tap is included, with the correct connections to be confirmed with ETE.
Key Advantages
- Heavy-duty 3000 VA (3 kVA) single-phase multi-voltage control transformer.
- 380/420 V primary voltage terminals for compatible industrial AC supplies.
- 55 V or 110 V AC secondary output selection through dedicated taps.
- 20 V primary adjustment tap for manufacturer-specified voltage adjustment.
- Provides electrical isolation between primary and secondary windings.
- Class E insulation for dependable electrical insulation performance.
- 3% voltage regulation as specified for this transformer model.
- Higher apparent-power capacity for appropriately selected industrial control loads.
- Robust construction suitable for industrial machinery and electrical cabinets.
- EPN 5 enclosure reference for identifying an appropriate enclosure arrangement.
Key Features
- ETE MV multi-voltage control transformer series.
- 3000 VA (3 kVA) rated apparent power.
- Single-phase transformer construction.
- Primary terminals: 20/0/380/420 V.
- 380/420 V primary voltage terminals.
- 20 V primary adjustment tap; confirm connections with ETE.
- Secondary terminals: 0/55/110 V.
- 55 V AC secondary output through the appropriate tap.
- 110 V AC secondary output through the appropriate tap.
- Class E insulation system.
- 3% voltage regulation.
- 192 × 189 × 185 mm dimensions.
- 28 kg transformer weight.
- EPN 5 enclosure reference.
Technical Specifications
- Manufacturer: ETE
- Series: MV Multi-Voltage Control Transformers
- Model: MV3000P2S1
- Product type: Industrial multi-voltage control transformer
- Transformer type: Single-phase
- Rated apparent power: 3000 VA (3 kVA)
- Primary terminals: 20/0/380/420 V
- Primary voltage terminals: 380/420 V
- Primary adjustment tap: 20 V
- Primary connection note: Confirm adjustment tap connections with ETE
- Secondary terminals: 0/55/110 V
- Secondary output connection: 55 V or 110 V AC taps
- Insulation class: E
- Voltage regulation: 3%
- Length: 192 mm
- Width: 189 mm
- Height: 185 mm
- Dimensions (L × W × H): 192 × 189 × 185 mm
- Weight: 28 kg
- Enclosure reference: EPN 5
- Product range reference: ETE Stock Control Transformer Range, March 2026
Reliable 55 V and 110 V AC Power for Industrial Control Systems
The ETE MV3000P2S1 is designed to convert a compatible incoming industrial AC supply into a selected secondary voltage for machinery and electrical control circuits. Its primary terminals are marked 20/0/380/420 V, while its secondary winding features 0/55/110 V taps. This arrangement provides flexibility when selecting an appropriate control voltage for compatible equipment.
The secondary tapping arrangement allows selection of either a nominal 55 V AC output or a nominal 110 V AC output using the appropriate terminals. Its 3000 VA (3 kVA) rating defines the transformer's total rated apparent-power capacity. Connected equipment must be selected within the applicable transformer and tap loading limits.
The MV3000P2S1 also incorporates a 20 V primary adjustment tap for the manufacturer's specified voltage adjustment arrangement. The exact connections must be confirmed with ETE before energising the transformer. Its Class E insulation, 3% voltage regulation and substantial construction make it suitable for appropriately designed industrial electrical control panels with adequate circuit protection, mounting and ventilation.
Typical Applications
- Industrial electrical control panels requiring 55 V or 110 V AC supplies.
- Machinery control circuits and industrial automation systems.
- Compatible AC contactors, relays and switching equipment.
- Motor control centres and industrial electrical cabinets.
- Manufacturing and production machinery.
- Packaging, conveying and material handling systems.
- Higher-capacity industrial AC control power applications.
- OEM machine building and electrical panel manufacturing.
- Industrial maintenance and replacement control transformer installations.
Frequently Asked Questions
What is the ETE MV3000P2S1 used for?
The ETE MV3000P2S1 is a 3000 VA single-phase multi-voltage control transformer designed to provide selectable 55 V or 110 V AC power for compatible industrial machinery and electrical control systems.
What primary terminals does the MV3000P2S1 have?
The transformer features 20/0/380/420 V primary terminals, including a 20 V adjustment tap. The correct connections must be confirmed with ETE.
Can the MV3000P2S1 provide both 55 V and 110 V AC?
Yes. The transformer has 0/55/110 V secondary terminals, allowing a nominal 55 V or 110 V AC output to be selected through the appropriate secondary tap.
What is the purpose of the 20 V primary adjustment tap?
The 20 V primary adjustment tap provides a manufacturer-specified voltage adjustment facility. Its exact terminal connections must be confirmed with ETE before installation.
What are the power rating, dimensions and enclosure reference?
The MV3000P2S1 is rated at 3000 VA (3 kVA), measures 192 × 189 × 185 mm, weighs 28 kg and has an EPN 5 enclosure reference.
Robust Multi-Voltage Control Transformers for Industrial Applications
The ETE MV multi-voltage control transformer range provides dependable voltage transformation for industrial electrical installations. The MV3000P2S1 combines a 3000 VA rating, selectable 55 V or 110 V AC secondary taps and 3% voltage regulation to support appropriately rated machinery control and industrial automation systems.
Why Choose the ETE MV4000P1S1 Multi-Voltage Control Transformer?
The ETE MV4000P1S1 is a heavy-duty 4000 VA (4 kVA) single-phase multi-voltage control transformer designed to provide reliable AC control power for industrial machinery, electrical control panels and automation systems. Part of the ETE MV multi-voltage control transformer range, it features a multi-terminal primary winding and selectable secondary voltage taps for flexible industrial electrical installations.
The transformer incorporates 10/0/220/240 V primary terminals and 0/55/110 V secondary terminals, allowing selection of either a nominal 55 V or 110 V AC output. This arrangement makes the MV4000P1S1 suitable for compatible industrial control equipment requiring a dedicated AC supply at one of these voltages.
With a rated apparent power of 4000 VA, Class F insulation and 3% voltage regulation, the MV4000P1S1 is designed for appropriately selected higher-capacity industrial control loads. Its dimensions of 245 × 190 × 230 mm and weight of 36 kg should be considered when planning installation and mechanical support. The transformer also incorporates a 10 V primary adjustment tap, with the correct connections to be confirmed with ETE.
Key Advantages
- Heavy-duty 4000 VA (4 kVA) single-phase multi-voltage control transformer.
- 220/240 V primary voltage terminals for compatible AC supply arrangements.
- 55 V or 110 V AC secondary output selection through dedicated taps.
- 10 V primary adjustment tap for manufacturer-specified voltage adjustment.
- Provides electrical isolation between primary and secondary windings.
- Class F insulation for the specified insulation system.
- 3% voltage regulation as specified for this transformer model.
- Higher apparent-power capacity for appropriately selected industrial control loads.
- Robust construction for industrial machinery and electrical control cabinets.
- EPN 6 enclosure reference for identifying an appropriate enclosure arrangement.
Key Features
- ETE MV multi-voltage control transformer series.
- 4000 VA (4 kVA) rated apparent power.
- Single-phase transformer construction.
- Primary terminals: 10/0/220/240 V.
- 220/240 V primary voltage terminals.
- 10 V primary adjustment tap; confirm connections with ETE.
- Secondary terminals: 0/55/110 V.
- 55 V AC secondary output through the appropriate tap.
- 110 V AC secondary output through the appropriate tap.
- Class F insulation system.
- 3% voltage regulation.
- 245 × 190 × 230 mm dimensions.
- 36 kg transformer weight.
- EPN 6 enclosure reference.
Technical Specifications
- Manufacturer: ETE
- Series: MV Multi-Voltage Control Transformers
- Model: MV4000P1S1
- Product type: Industrial multi-voltage control transformer
- Transformer type: Single-phase
- Rated apparent power: 4000 VA (4 kVA)
- Primary terminals: 10/0/220/240 V
- Primary voltage terminals: 220/240 V
- Primary adjustment tap: 10 V
- Primary connection note: Confirm adjustment tap connections with ETE
- Secondary terminals: 0/55/110 V
- Secondary output connection: 55 V or 110 V AC taps
- Insulation class: F
- Voltage regulation: 3%
- Length: 245 mm
- Width: 190 mm
- Height: 230 mm
- Dimensions (L × W × H): 245 × 190 × 230 mm
- Weight: 36 kg
- Enclosure reference: EPN 6
- Product range reference: ETE Stock Control Transformer Range, March 2026
Higher-Capacity 55 V and 110 V AC Power for Industrial Control Systems
The ETE MV4000P1S1 is designed to convert a compatible incoming AC supply into a selected secondary voltage for industrial machinery and electrical control circuits. Its primary winding features terminals marked 10/0/220/240 V, while the secondary winding incorporates 0/55/110 V taps. This configuration provides flexible voltage selection for compatible industrial control equipment.
The secondary tapping arrangement allows a nominal 55 V AC output or 110 V AC output to be selected through the appropriate terminals. Its 4000 VA (4 kVA) apparent-power rating provides a defined capacity for suitably selected industrial control loads. The total connected load and any individual tap loading must comply with the manufacturer's applicable ratings.
The MV4000P1S1 also incorporates a 10 V primary adjustment tap, with the exact terminal connections to be confirmed with ETE before energising the transformer. Its Class F insulation and 3% voltage regulation define important electrical characteristics. At 36 kg, the transformer requires suitable mechanical support, secure mounting, electrical protection and adequate ventilation within the selected enclosure.
Typical Applications
- Industrial electrical control panels requiring 55 V or 110 V AC supplies.
- Machinery control circuits and industrial automation systems.
- Compatible AC contactors, relays and switching equipment.
- Motor control centres and industrial electrical cabinets.
- Manufacturing and production machinery.
- Packaging, conveying and material handling systems.
- Higher-capacity industrial AC control power applications.
- OEM machine building and electrical panel manufacturing.
- Industrial maintenance and replacement control transformer installations.
Frequently Asked Questions
What is the ETE MV4000P1S1 used for?
The ETE MV4000P1S1 is a 4000 VA single-phase multi-voltage control transformer designed to provide selectable 55 V or 110 V AC supplies for compatible industrial machinery and electrical control systems.
What primary terminals does the MV4000P1S1 have?
The transformer features 10/0/220/240 V primary terminals, including a 10 V adjustment tap. The correct primary connections must be confirmed with ETE.
Can the MV4000P1S1 provide both 55 V and 110 V AC?
Yes. Its 0/55/110 V secondary terminals allow a nominal 55 V or 110 V AC output to be selected using the appropriate secondary tap.
What insulation class and voltage regulation does this transformer have?
The MV4000P1S1 features Class F insulation and a specified 3% voltage regulation.
What are the power rating, dimensions and enclosure reference?
The MV4000P1S1 is rated at 4000 VA (4 kVA), measures 245 × 190 × 230 mm, weighs 36 kg and has an EPN 6 enclosure reference.
Heavy-Duty Multi-Voltage Control Transformers for Industrial Applications
The ETE MV multi-voltage control transformer range provides dependable AC voltage transformation for industrial electrical installations. The MV4000P1S1 combines a 4000 VA rating, selectable 55 V or 110 V AC secondary taps, Class F insulation and 3% voltage regulation to support appropriately rated machinery control and industrial automation applications.
