Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
SPS-1-024-12DC IMO Power Supply 12VDC 24 Watts 2A
IMO SPS-1-024-12DC DIN rail power supply providing 24 W of regulated 12 V DC output at 2 A from a universal 85–264 V AC input supply.
£13.59
IMO SPS-1-024-12DC 24 W 12 V DC DIN Rail Power Supply
The IMO SPS-1-024-12DC is a single-phase AC/DC switch mode power supply from IMO's SPS Series. It converts a universal 85–264 V AC supply into a regulated 12 V DC output at up to 2 A (24 W) and clips straight onto a TS35 DIN rail.
The SPS Series is IMO's modular range of slim, fanless DIN rail power supplies. Units are built in five frame widths from 18 mm to 105 mm, so panel space can be matched to the load. The SPS-1-024-12DC uses Frame 2 (90 × 35 × 58 mm H × W × D) and weighs about 120 g.
Key Features
- 24 W rated output at 12 V DC, 2 A.
- Universal input: 85–264 V AC or 120–370 V DC.
- Typical efficiency of 88%.
- Output adjustable over 10.8–13.8 V DC.
- Short circuit protection: hiccup mode, automatic recovery.
- Over voltage protection at 15–18 V DC; overload protection at 105–160%.
- Approvals: UKCA, CE, cURus Class 2 (UL1310).
- IP20 rated, TS35 DIN rail mounting, free air convection cooling.
Typical Applications
- PLCs, HMIs and remote I/O.
- Sensors, relays, contactor coils and timers.
- Temperature and process controllers.
- Machine and control panel auxiliary supplies.
- Building automation and instrumentation.
Technical Specifications
Tick the specs you need, then view products that match.
| Current | 2 A | |
|---|---|---|
| Phase | Single Phase | |
| Device Type | DIN rail PSU | |
| Mounting Type | DIN rail | |
| Input Voltage | 85–264 V AC | |
| Input Voltage Range | 100–120 V AC, 200–240 V AC | |
| Manufacturer | IMO | |
| Series | SPS Series | |
| Model | SPS-1-024-12DC | |
| Product type | DIN rail mounted AC/DC power supply | |
| Output Voltage | 12 V DC | |
| Output current | 2 A | |
| Rated output power | 24 W | |
| Input Voltage | 85–264 V AC | |
| Alternative input | 120–370 V DC | |
| Input frequency | 47–63 Hz | |
| Input phases | Single phase | |
| Efficiency | 88% | |
| Inrush current (115 / 230 V AC) | 25 / 45 A | |
| Output voltage accuracy | ±1% | |
| Line regulation | ±1% | |
| Load regulation | ±1% | |
| Ripple & noise | <120 mVp-p | |
| Voltage trim range | 10.8–13.8 V DC | |
| Hold-up time | 30 / 12 ms (115 / 230 V AC) | |
| Overload protection | 105–160% | |
| Over voltage protection | 15–18 V DC | |
| Short circuit protection | Hiccup mode, automatic recovery | |
| DC OK indicator | Green DC OK LED | |
| Isolation voltage | 3000 V AC / 4242 V DC | |
| Approvals | UKCA, CE, cURus Class 2 (UL1310) | |
| Protection rating | IP20 | |
| Mounting Type | TS35 DIN rail mounting | |
| Cooling method | Free air convection (fanless) | |
| Case material | Plastic | |
| Frame size | Frame 2 | |
| Terminals | 0.2–2.5 mm² (AWG 24–12), 0.5 Nm | |
| Operating temperature | -20 to +70 °C (derating 2.5%/°C from 50 °C) | |
| Storage temperature | -40 to +85 °C | |
| Relative humidity | 20 to 90% RH | |
| Dimensions (H × W × D) | approx. 90 × 35 × 58 mm | |
| Weight | approx. 120 g | |
| HS Code | 8504409590 |
Frequently Asked Questions
What output does the IMO SPS-1-024-12DC provide?
A regulated 12 V DC output at up to 2 A, a rated output of 24 W.
Can the output voltage be adjusted?
Yes. The output can be trimmed over 10.8–13.8 V DC using the V ADJ potentiometer on the unit.
What input voltage does it accept?
85–264 V AC, or 120–370 V DC.
What is the operating temperature range?
-20 to +70 °C (derating 2.5%/°C from 50 °C). Output must be derated above the stated temperature; see the IMO derating curve.
How is it mounted?
It clips onto a standard TS35 DIN rail inside a control panel or enclosure.
