Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
SPS-1-012-5DC IMO Power Supply 5VDC 12 Watts 2.4A
IMO SPS-1-012-5DC DIN rail power supply providing 12 W of regulated 5 V DC output at 2.4 A from a universal 85–264 V AC input supply.
£11.34
IMO SPS-1-012-5DC 12 W 5 V DC DIN Rail Power Supply
The IMO SPS-1-012-5DC is a single-phase AC/DC switch mode power supply from IMO's SPS Series. It converts a universal 85–264 V AC supply into a regulated 5 V DC output at up to 2.4 A (12 W) and clips straight onto a TS35 DIN rail.
The SPS Series is IMO's modular range of slim, fanless DIN rail power supplies. Units are built in five frame widths from 18 mm to 105 mm, so panel space can be matched to the load. The SPS-1-012-5DC uses Frame 1 (90 × 18 × 58 mm H × W × D) and weighs about 78 g.
Key Features
- 12 W rated output at 5 V DC, 2.4 A.
- Universal input: 85–264 V AC or 120–370 V DC.
- Typical efficiency of 82%.
- Output adjustable over 4.5–5.5 V DC.
- Short circuit protection: hiccup mode, automatic recovery.
- Over voltage protection at 5.75–6.5 V DC; overload protection at 110–145%.
- Approvals: UKCA, CE, cURus Class 2 (UL1310).
- IP20 rated, TS35 DIN rail mounting, free air convection cooling.
Typical Applications
- 5 V DC logic and electronics.
- Instrumentation and display modules.
- Interface and communication modules.
- Small control panel auxiliary supplies.
Technical Specifications
Tick the specs you need, then view products that match.
| Current | 2.4 A | |
|---|---|---|
| Phase | Single Phase | |
| Device Type | DIN rail PSU | |
| Mounting Type | DIN rail | |
| Input Voltage | 85–264 V AC | |
| Input Voltage Range | 100–120 V AC, 200–240 V AC | |
| Manufacturer | IMO | |
| Series | SPS Series | |
| Model | SPS-1-012-5DC | |
| Product type | DIN rail mounted AC/DC power supply | |
| Output Voltage | 5 V DC | |
| Output current | 2.4 A | |
| Rated output power | 12 W | |
| Input Voltage | 85–264 V AC | |
| Alternative input | 120–370 V DC | |
| Input frequency | 47–63 Hz | |
| Input phases | Single phase | |
| Efficiency | 82% | |
| Inrush current (115 / 230 V AC) | 25 / 45 A | |
| Output voltage accuracy | ±1% | |
| Line regulation | ±1% | |
| Load regulation | ±1% | |
| Ripple & noise | <80 mVp-p | |
| Voltage trim range | 4.5–5.5 V DC | |
| Hold-up time | 30 / 12 ms (115 / 230 V AC) | |
| Overload protection | 110–145% | |
| Over voltage protection | 5.75–6.5 V DC | |
| Short circuit protection | Hiccup mode, automatic recovery | |
| DC OK indicator | Green DC OK LED | |
| Isolation voltage | 3000 V AC / 4242 V DC | |
| Approvals | UKCA, CE, cURus Class 2 (UL1310) | |
| Protection rating | IP20 | |
| Mounting Type | TS35 DIN rail mounting | |
| Cooling method | Free air convection (fanless) | |
| Case material | Plastic | |
| Frame size | Frame 1 | |
| Terminals | 0.2–2.5 mm² (AWG 24–12), 0.5 Nm | |
| Operating temperature | -20 to +70 °C (derating 2.5%/°C from 50 °C) | |
| Storage temperature | -40 to +85 °C | |
| Relative humidity | 20 to 90% RH | |
| Dimensions (H × W × D) | approx. 90 × 18 × 58 mm | |
| Weight | approx. 78 g | |
| HS Code | 8504409590 |
Frequently Asked Questions
What output does the IMO SPS-1-012-5DC provide?
A regulated 5 V DC output at up to 2.4 A, a rated output of 12 W.
Can the output voltage be adjusted?
Yes. The output can be trimmed over 4.5–5.5 V DC using the V ADJ potentiometer on the unit.
What input voltage does it accept?
85–264 V AC, or 120–370 V DC.
What is the operating temperature range?
-20 to +70 °C (derating 2.5%/°C from 50 °C). Output must be derated above the stated temperature; see the IMO derating curve.
How is it mounted?
It clips onto a standard TS35 DIN rail inside a control panel or enclosure.
