Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 78.X1.1.230.2412 is a 240 W industrial DIN rail switch mode power supply delivering a regulated 24 V DC output at 10 A, with adjustable 24–28 V DC output voltage, universal AC/DC input compatibility, active power factor correction and integrated electronic protection.
£42.48
The Finder 78.X1.1.230.2412 is a high-performance 240 W, 24 V DC industrial switch mode power supply (SMPS) designed to deliver stable and reliable electrical power for industrial automation, machinery control and professional electrical installations. Part of the Finder Series 78, this single-phase DIN rail power supply combines universal AC/DC input compatibility, active power factor correction and an adjustable regulated DC output.
Delivering a nominal 24 V DC output at 10 A, the Finder 78.X1.1.230.2412 provides up to 240 W of rated output power. Its output voltage can be adjusted between 24 and 28 V DC, allowing the supply voltage to be matched to compatible industrial control equipment and electrical loads.
The unit accepts an operating input range of 90–264 V AC or 127–370 V DC, making it suitable for a broad range of electrical supply arrangements. Its double-stage switch mode architecture incorporates active power factor correction (PFC) to improve input power characteristics.
Featuring a robust 63 mm-wide DIN rail housing, electronic protection functions and support for appropriately configured parallel operation, the Finder 78.X1.1.230.2412 is designed for demanding industrial power distribution and automation applications.
The Finder 78.X1.1.230.2412 provides a regulated 24 V DC output for industrial equipment requiring a stable low-voltage supply. Its 10 A output current and 240 W power rating make it suitable for powering multiple compatible automation devices from a single industrial power supply.
Typical connected equipment may include programmable logic controllers, industrial relays, sensors, interface modules, electronic control circuits and other devices designed for operation from a 24 V DC supply.
The output voltage can be adjusted between 24 and 28 V DC. This adjustment capability is useful where connected equipment permits a higher supply voltage or where compensation for voltage drop along distribution wiring is required.
Any adjustment above the nominal 24 V DC setting must remain within the voltage tolerance of all connected devices. The permissible output current and power limits must also be observed.
Unlike simpler single-stage power supplies, the Finder 78.X1.1.230.2412 incorporates a double-stage switch mode architecture with active power factor correction.
Active PFC helps improve the relationship between the input current and supply voltage, reducing unwanted reactive power demand and improving the electrical characteristics of the input supply.
This technology is particularly valuable in industrial installations containing multiple electronic power supplies, where power quality and efficient use of the electrical distribution system are important design considerations.
The switch mode conversion process also enables the power supply to deliver substantial output power from a comparatively compact enclosure, making it suitable for space-conscious industrial control panels.
The Finder 78.X1.1.230.2412 is designed to operate from a wide range of AC and DC supply voltages.
Its 90–264 V AC operating input range supports common industrial and commercial single-phase mains supplies, while its 127–370 V DC operating range provides additional flexibility for compatible DC distribution systems.
The nominal AC input rating is 100–240 V AC, while the nominal DC input range is 140–338 V DC. Installers should distinguish between nominal supply ratings and the broader permitted operating ranges when specifying the unit.
This flexibility makes the power supply useful for industrial equipment intended for installation across different electrical supply environments.
The Finder 78.X1.1.230.2412 incorporates several electronic protection functions designed to support dependable operation and protect the power supply against specified abnormal conditions.
These protective features do not replace correctly selected upstream circuit protection, suitable conductor sizing, appropriate earthing arrangements or compliance with applicable electrical installation requirements.
The Finder Series 78.X1 power supply supports parallel operation using appropriately selected external diodes. This provides additional flexibility when designing industrial power systems requiring increased load capacity or redundancy.
For increased-current applications, multiple compatible power supplies can be incorporated into a correctly engineered arrangement, provided their output settings, current sharing and protective requirements are considered.
For redundant systems, external diode arrangements can help prevent one supply from back-feeding another, allowing an appropriately designed installation to maintain power if one source becomes unavailable.
Parallel operation should be implemented in accordance with the manufacturer's application guidance rather than by assuming that direct output-to-output connections are permissible.
The Finder 78.X1.1.230.2412 is designed for installation on a standard 35 mm DIN rail in accordance with EN 60715.
Its enclosure has a width of 63 mm, a depth of approximately 119 mm and a height of approximately 125.2 mm, providing a compact installation footprint for a 240 W industrial power supply.
Box-clamp terminals support secure electrical connections, while the DIN rail mounting arrangement allows the power supply to be integrated alongside other industrial automation and electrical control components.
The unit is specified for an ambient operating temperature range of −20 to +70 °C, with output derating required under applicable conditions. Appropriate enclosure ventilation, installation clearances and thermal management must be considered when operating in warm environments.
Tick the specs you need, then view products that match.
| Mounting Type | DIN rail | |
|---|---|---|
| Device Type | DIN rail PSU | |
| Current | 10 A | |
| Manufacturer | Finder | |
| Series | 78 | |
| Type | 78.X1 | |
| Manufacturer part number | 78.X1.1.230.2412 | |
| Product category | Industrial Switch Mode Power Supplies | |
| Product type | Single-phase DIN rail AC/DC power supply | |
| Power conversion technology | Switch mode | |
| Conversion architecture | Double-stage with active PFC | |
| Number of outputs | 1 | |
| Nominal output voltage | 24 V DC | |
| Adjustable output voltage range | 24–28 V DC | |
| Rated output current | 10 A | |
| Rated output power | 240 W | |
| Output characteristic | Regulated DC voltage | |
| Nominal AC input voltage | 100–240 V AC | |
| AC input operating range | 90–264 V AC | |
| Nominal DC input voltage | 140–338 V DC | |
| DC input operating range | 127–370 V DC | |
| Input voltage type | AC/DC | |
| Power factor correction | Active PFC | |
| Efficiency | 87% nominal catalogue value | |
| Input-to-output isolation | 3 kV | |
| Short-circuit protection | Hiccup mode with automatic recovery | |
| Thermal protection | Internal thermal shutdown | |
| Overvoltage protection | Varistor protection | |
| Peak current capability | Up to 30% above rated current, subject to specified conditions | |
| Parallel operation | Supported with external diodes for increased current or redundancy | |
| Operating temperature | −20 to +70 °C, subject to derating | |
| Mounting method | 35 mm DIN rail, EN 60715 | |
| Housing width | 63 mm | |
| Housing depth | 119 mm | |
| Housing height | Approximately 125.2 mm | |
| Electrical connections | Screw-operated box-clamp terminals | |
| Approvals | CE, UKCA and cULus | |
| Applicable standards | IEC/EN 62368-1 and UL 61010 | |
| EAN / GTIN-13 | 8012823465951 |
The Finder 78.X1.1.230.2412 is a 240 W industrial switch mode power supply used to provide regulated 24 V DC power for compatible automation equipment, PLCs, sensors and electrical control systems.
The power supply provides a nominal 24 V DC output, adjustable between 24 and 28 V DC to suit compatible electrical equipment.
The Finder 78.X1.1.230.2412 has a 10 A rated output current and delivers up to 240 W at its nominal 24 V DC output.
The power supply accepts an operating input range of 90–264 V AC or 127–370 V DC, making it suitable for a variety of compatible industrial electrical supply systems.
Yes. The unit incorporates active power factor correction (PFC) as part of its double-stage switch mode conversion architecture.
Yes. The regulated DC output can be adjusted between 24 and 28 V DC, provided the connected equipment is suitable for the selected voltage.
Yes. The Finder Series 78.X1 supports appropriately designed parallel operation using external diodes for increased load current or redundancy, subject to the manufacturer's installation requirements.
Yes. The unit incorporates hiccup-mode short-circuit protection with automatic recovery, together with internal thermal shutdown and overvoltage protection.
The power supply is designed for 35 mm DIN rail mounting and features a 63 mm-wide enclosure with screw-operated box-clamp electrical terminals.
The Finder 78.X1 provides a nominal 240 W, 24 V DC output, while the Finder 78.Y1 provides 480 W at 24 V DC. Both belong to the Series 78 industrial power supply range and feature adjustable output voltage and active power factor correction.
The Finder 78.X1.1.230.2412 combines a regulated 24 V DC output, 10 A rated current, 240 W power capacity, adjustable 24–28 V DC output and universal AC/DC input compatibility in a compact DIN rail enclosure. Its active PFC technology, electronic protection functions and support for appropriately configured parallel operation make it a practical choice for industrial automation, machinery control and professional electrical power distribution.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.