Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£351.13
The WAGO 787-1632/000-070 is a reliable and efficient single-phase switched-mode power supply designed to deliver regulated 24 V DC power for industrial automation, electrical control panels and machinery. Part of the WAGO EPSITRON Classic 787 series, this DIN-rail-mounted power supply delivers a rated output current of 10 A and an output power of 240 W, making it suitable for powering PLCs, industrial controllers, sensors, actuators and other compatible DC equipment.
Designed for dependable operation in industrial environments, the WAGO 787-1632/000-070 features active power factor correction, adjustable output voltage and integrated overload and short-circuit protection. Its TopBoost functionality supports the tripping of suitable downstream protective devices during fault conditions, while the green DC OK LED and integrated DC OK signalling contact provide convenient output-status monitoring.
The power supply accepts a single-phase 100–240 V AC nominal input, with a permitted input range of 85–264 V AC or 100–372 V DC. Its adjustable output voltage ranges from 23–28.5 V DC, with a default setting of 24 V DC. Natural convection cooling when mounted horizontally, CAGE CLAMP connection technology and standard DIN-35 rail mounting support straightforward integration into industrial control cabinets.
Industrial switched-mode power supplies convert an AC or suitable DC input into regulated DC power for controllers, sensors, actuators and other automation equipment. The WAGO 787-1632/000-070 delivers a nominal 24 V DC output at 10 A, providing up to 240 W for compatible industrial loads.
The adjustable output voltage enables configuration within the specified 23–28.5 V DC range. Active power factor correction improves input power characteristics, while constant-current overload behaviour and short-circuit protection help maintain controlled operation under abnormal load conditions. The TopBoost function can support the operation of suitable downstream protective devices when its electrical and timing requirements are met.
The integrated green DC OK LED and normally open signalling contact provide convenient output-status monitoring. CAGE CLAMP connections simplify wiring, and DIN-35 rail mounting supports straightforward integration into industrial control cabinets. Natural convection cooling when mounted horizontally reduces the need for forced-air cooling, subject to the specified installation clearances and derating requirements.
| Manufacturer | WAGO |
|---|---|
| Series | EPSITRON Classic 787 |
| Model | 787-1632/000-070 |
| Product type | Switched-mode power supply |
| Number of phases | 1 |
| Nominal input voltage | 100–240 V AC |
| AC input voltage range | 85–264 V AC |
| DC input voltage range | 100–372 V DC |
| Input voltage derating | −2.5%/V below 100 V AC; −1%/V below 130 V DC |
| Nominal mains frequency | 44–66 Hz; 0 Hz for DC operation |
| Input current | Maximum 1.25 A at 230 V AC; maximum 2.74 A at 100 V AC |
| Inrush current | Maximum 30 A |
| Discharge current | Maximum 1 mA |
| Power factor correction | Active PFC |
| Mains failure hold-up time | At least 17 ms at 230 V AC; at least 15 ms at 100 V AC |
| Nominal output voltage | 24 V DC |
| Adjustable output voltage | 23–28.5 V DC |
| Default output voltage | 24 V DC |
| Nominal output current | 10 A at 24 V DC |
| Rated output power | 240 W |
| Output control deviation | Maximum 1% |
| Residual ripple | Maximum 50 mV peak-to-peak |
| Current limitation | Approximately 1.1 times nominal output current |
| Overload behaviour | Constant-current operation |
| TopBoost functionality | Supports downstream protective-device tripping under specified fault conditions |
| Status indication | Green DC OK LED |
| Signalling contact | 1 × DC OK normally open contact, maximum 30 V AC/DC and 1 A |
| Isolation voltage, primary to secondary | 4.242 kV DC |
| Isolation voltage, primary to PE | 2.2 kV DC |
| Isolation voltage, secondary to PE | 0.7 kV DC |
| Protection class | I |
| Protection rating | IP20 according to EN 60529 |
| Reverse-feed resistance | Up to 35 V DC |
| Secondary overvoltage protection | Internal protective circuit, maximum 40 V DC under fault conditions |
| Short-circuit protection | Yes |
| Open-circuit protection | Yes |
| Parallel operation | Supported |
| Series operation | Supported |
| Connection technology | CAGE CLAMP |
| Conductor cross-section | 0.08–2.5 mm² for solid and fine-stranded conductors |
| Conductor strip length | 8–9 mm |
| Mounting type | DIN-35 rail mounting |
| Cooling method | Natural convection when mounted horizontally |
| PCB coating | Designed for resistance to specified flowing mixed-gas environments, Group G3 |
| Dimensions (W × H × D) | 55 × 127 × 172 mm |
| Weight | Approximately 1.14 kg |
| Operating temperature | −25 to +70 °C, subject to derating |
| Storage temperature | −25 to +85 °C |
| Relative humidity | 5–96%, non-condensing |
| Climatic category | 3K3 according to EN 60721 |
| Overvoltage category | II |
| Pollution degree | 2 |
| Standards and approvals | EN 61010-1, EN 61010-2-201, EN 61204-3, UL 60950-1 and UL 508 |
| Conformity marking | CE |
| Environmental compliance | RoHS compliant |
| Country of origin | Germany |
| GTIN | 4055143667944 |
The WAGO 787-1632/000-070 is a single-phase switched-mode power supply that delivers regulated 24 V DC power for industrial automation equipment, control panels and compatible electronic loads.
The power supply delivers a nominal output current of 10 A and a rated output power of 240 W at its nominal 24 V DC output.
The unit has a nominal single-phase input rating of 100–240 V AC and accepts 85–264 V AC or 100–372 V DC within the specified operating conditions.
Yes. The output voltage is adjustable from 23 to 28.5 V DC, with a factory default setting of 24 V DC.
TopBoost is a power-supply function designed to provide additional current for a limited time under specified fault conditions, helping suitable downstream circuit breakers trip. Correct protective-device selection and coordination are required.
Yes. It includes a green DC OK LED and a normally open DC OK signalling contact rated up to 30 V AC/DC and 1 A for compatible monitoring circuits.
Yes. Series and parallel operation are supported when the units are configured according to the manufacturer's instructions and the requirements of the complete power distribution system.
The power supply is designed for DIN-35 rail mounting inside a suitable electrical enclosure. Its CAGE CLAMP connection technology supports compatible solid and fine-stranded conductors.
The WAGO 787-1632/000-070 has an IP20 protection rating and is intended for installation inside a suitable industrial control cabinet or electrical enclosure.
The specified operating temperature range is −25 to +70 °C. Output derating applies under certain temperature and input-voltage conditions, so the manufacturer's installation requirements must be followed.
WAGO EPSITRON Classic power supplies provide regulated DC power for industrial automation and control equipment. The 787-1632/000-070 combines a 24 V DC, 10 A output with active power factor correction, TopBoost functionality and DC OK signalling to support dependable power distribution in compatible industrial applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.