Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£90.69
The WAGO 787-1007 is a compact, single-phase switched-mode power supply specifically designed to power the WAGO 753-647 DALI Multi-Master Module. Part of the WAGO EPSITRON COMPACT range, it provides a regulated 18 V DC output at 1.1 A, delivering 19.8 W of nominal output power for DALI lighting control installations.
Designed for integration with WAGO's modular automation systems, the 787-1007 can supply up to five WAGO 753-647 DALI Multi-Master Modules, subject to the connected load and manufacturer's installation requirements. Each DALI Multi-Master Module limits the current available to its DALI line to 200 mA, supporting controlled power distribution within compatible DALI lighting networks.
Featuring a universal 85–264 V AC input range, DC input compatibility, CAGE CLAMP® connection technology and a compact 54 mm-wide DIN rail enclosure, the WAGO 787-1007 provides a practical power supply for building automation and intelligent lighting control. Its stepped housing profile makes it particularly suitable for electrical distribution boards and compact control cabinets.
Modern building automation systems rely on dependable power supplies to support digital lighting control networks. The WAGO 787-1007 is specifically designed to provide 18 V DC power for the WAGO 753-647 DALI Multi-Master Module, enabling compatible WAGO controllers to manage DALI lighting installations. Its 1.1 A output capacity allows multiple compatible DALI modules to be supplied from a single power supply, helping simplify control cabinet design and power distribution.
The unit's single-phase universal input, compact stepped enclosure and DIN rail mounting make it suitable for building management systems, commercial lighting control panels and industrial lighting automation. Its integrated overload protection and output status indication support reliable operation, while the CAGE CLAMP® terminals provide practical connections for electrical installers and panel builders. The 787-1007 is a dedicated supply for compatible DALI control equipment rather than a general-purpose 24 V DC automation power supply.
| Voltage type (supply voltage) | AC/DC |
|---|---|
| 1st secondary output voltage | 18 – 18 V |
| Stabilized | Yes |
| Type of electric connection | Spring clamp connection |
| Width in number of modular spacings | 3 |
| Height | 89 mm |
| Nominal value output voltage 1 | 18 V |
| Output voltage stabilized | Yes |
| Rated supply voltage AC 50 Hz | 85 – 264 V |
| Rated supply voltage AC 60 Hz | 85 – 264 V |
| Nominal value output current 1 | 1.1 A |
| Max. output current 1 | 1.1 A |
| Width | 54 mm |
| Rated supply voltage DC | 120 – 300 V |
| Short-circuit-proof | Yes |
| Degree of protection (IP) | IP20 |
| Power output | 19.8 W |
| Depth | 89 mm |
| Suitable for rail mounting | Yes |
| Manufacturer | WAGO |
| Series | EPSITRON COMPACT |
| Model | 787-1007 |
| Manufacturer part number | 787-1007 |
| Product type | Primary switched-mode power supply |
| Primary application | Power supply for WAGO 753-647 DALI Multi-Master Module |
| Input phases | 1 |
| Nominal AC input voltage | 100–240 V AC |
| AC input voltage range | 85–264 V AC |
| DC input voltage | 120–300 V DC |
| Nominal mains frequency range | 44–66 Hz |
| Input current | ≤ 0.4 A at 230 V AC; ≤ 0.6 A at 110 V AC |
| Maximum inrush current | 30 A |
| Mains failure hold-up time | ≥ 80 ms at 230 V AC; ≥ 10 ms at 110 V AC |
| Nominal output voltage | 18 V DC (SELV) |
| Factory output setting | 18 V DC |
| Rated output current | 1.1 A |
| Output current in any mounting position | 0.8 A |
| Nominal output power | 19.8 W |
| Output voltage deviation | ≤ 2% |
| Residual output ripple | ≤ 100 mV peak-to-peak |
| Typical current limitation | 1.1 × rated output current |
| Overload behaviour | Constant-current mode |
| Typical efficiency | 80% |
| Status indication | Green output status LED |
| Internal fuse | T 2 A / 250 V AC |
| External DC input protection | External fuse required for DC input operation |
| Connection technology | CAGE CLAMP® |
| Connection cross-section | Up to 2.5 mm² |
| Mounting | 35 mm DIN rail |
| Cooling | Natural convection |
| Protection rating | IP20 |
| Operating temperature | −25 to +60 °C |
| Compatible DALI module | WAGO 753-647 |
| Supported DALI modules | Up to 5, subject to system configuration |
| DALI line current limit | 200 mA per DALI Multi-Master Module |
The WAGO 787-1007 is a compact switched-mode power supply specifically designed to power the WAGO 753-647 DALI Multi-Master Module. It provides a regulated 18 V DC output at 1.1 A for compatible DALI lighting control installations.
The WAGO 787-1007 provides a nominal output voltage of 18 V DC and a rated output current of 1.1 A, corresponding to 19.8 W of nominal output power. When installed in alternative mounting positions, the output current rating is 0.8 A.
The WAGO 787-1007 is designed to supply up to five WAGO 753-647 DALI Multi-Master Modules, subject to the manufacturer's installation and loading requirements. Each compatible DALI Multi-Master Module limits its DALI line current to 200 mA.
The WAGO 787-1007 accepts a nominal 100–240 V AC single-phase input, with an operating range of 85–264 V AC. It can also operate from a compatible DC input supply within the specified range of 120–300 V DC. External fuse protection is required for DC input operation.
No. The WAGO 787-1007 has a fixed nominal output of 18 V DC and is specifically designed for the WAGO 753-647 DALI Multi-Master Module. Equipment requiring a nominal 24 V DC supply should use a suitably rated 24 V DC power supply instead.
WAGO EPSITRON COMPACT power supplies provide building automation engineers, lighting control specialists and electrical panel builders with reliable DC power solutions. The WAGO 787-1007 combines a dedicated 18 V DC, 1.1 A output with compact DIN rail construction and compatibility with WAGO 753-647 DALI Multi-Master Modules for professional intelligent lighting installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.