Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£24.00
The WAGO 756-3101/040-050 is a 5 m industrial power supply cable featuring a straight, 4-pole, A-coded M12 female socket at one end and a free cable end at the other. Part of WAGO's 756 Series industrial connectivity range, this pre-assembled cable provides a robust wiring solution for industrial automation, machine control and distributed I/O applications.
Featuring four 0.75 mm² stranded copper conductors, the cable is designed for power and control connections using compatible M12 A-coded interfaces. Its connector has an operating voltage rating of 250 V AC/DC and an operating current rating of 4 A, subject to the electrical limits of the complete installation.
The grey polyurethane (PUR) outer sheath provides resistance to oil, chemicals, hydrolysis, microbes and ultraviolet radiation. With a halogen-free construction, drag-chain suitability and an operating temperature range of −30 to +80 °C, the WAGO 756-3101/040-050 is suitable for demanding industrial environments.
The WAGO 756-3101/040-050 is designed to connect compatible industrial equipment through a standardised four-pole M12 A-coded interface. Its straight female connector provides a factory-assembled connection, while the free cable end allows the installer to connect the conductors to a suitable terminal block, control enclosure or other approved electrical interface.
The 5 m cable length makes this variant suitable for applications requiring more routing distance than the corresponding 2 m version. The additional length can be useful for machinery with separated connection points, modular automation systems and field-mounted devices.
The M12 connector uses the following conductor colour assignments:
These assignments identify the individual conductors. The actual electrical function of each pin must be confirmed against the wiring diagram of the connected equipment.
The 250 V AC/DC and 4 A ratings describe the cable assembly's specified connector operating limits. The permissible voltage, current and protective arrangements of the complete circuit must also take account of the connected equipment and applicable installation requirements.
The cable features a grey polyurethane outer sheath designed to withstand demanding industrial conditions. Its resistance to oils, chemicals, hydrolysis, microbes and UV radiation makes it suitable for use around manufacturing equipment, machine frames and industrial control systems.
The cable is also specified as suitable for drag chains, allowing its use in appropriate moving-machine applications. Its minimum bending radius is ten times the cable diameter. Correct cable guidance, mechanical support and adherence to the manufacturer's movement limits are essential for reliable long-term operation.
The −30 to +80 °C operating temperature range applies to both stationary and moving applications, subject to the manufacturer's installation conditions. The halogen-free, silicone-free and CFC-free construction further supports use in industrial installations with defined material requirements.
| Manufacturer | WAGO |
|---|---|
| Product series | 756 |
| Part number | 756-3101/040-050 |
| Manufacturer designation | Power cable; M12A socket; straight; 4-pole; length 5 m |
| Product type | Industrial M12 power supply cable assembly |
| Connection type | M12 socket to free cable end |
| Connector 1 | M12 female socket |
| Connector coding | A-coded |
| Connector orientation | Straight, 0° |
| Connector 2 | Free cable end |
| Number of poles | 4 |
| Number of conductors | 4 |
| Cable length | 5 m |
| Conductor cross-section | 0.75 mm² |
| Conductor configuration | 4 × 0.75 mm² |
| Conductor construction | Bare copper wire, 40 × 0.15 mm |
| Conductor insulation | Halogen-free PP9Y |
| Cable type | Lif9YH-11YH 4 × 0.75 mm² |
| Outer sheath material | Polyurethane (PUR) |
| Outer sheath colour | Grey |
| Cable outer diameter | 6–6.4 mm |
| Operating voltage | 250 V AC/DC |
| Operating current | 4 A |
| Rated surge voltage | 2.5 kV |
| Contact resistance | 10 mΩ |
| Insulation resistance | Greater than 109 Ω |
| Conductor resistance | ≤ 26 Ω/km |
| Minimum bending radius | 10 × cable diameter |
| Drag-chain suitability | Yes |
| Operating temperature, moving installation | −30 to +80 °C |
| Operating temperature, stationary installation | −30 to +80 °C |
| Connector housing material | Thermoplastic polyurethane (TPU) |
| Connector housing colour | Black, approximately RAL 9005 |
| Recommended tightening torque | 1 Nm |
| Halogen-free | Yes |
| Silicone-free | Yes |
| CFC-free | Yes |
| Oil resistance | Yes |
| Chemical resistance | Yes |
| Hydrolysis resistance | Yes |
| Microbial resistance | Yes |
| UV resistance | Yes |
| Cable approval | UL-listed cable |
| Country of origin | Germany |
The WAGO 756-3101/040-050 is a 5 m industrial power supply cable used to connect compatible automation equipment through a four-pole M12 A-coded interface. It has a straight M12 female socket and a free cable end.
The cable has a manufactured length of 5 m, providing flexible routing between industrial devices and electrical connection points.
The cable has a straight, four-pole, A-coded M12 female socket at one end. The opposite end is unterminated for application-specific wiring.
The cable contains four stranded copper conductors, each with a cross-section of 0.75 mm².
The WAGO 756-3101/040-050 has an operating voltage rating of 250 V AC/DC and an operating current rating of 4 A.
The conductor assignment is pin 1 brown, pin 2 white, pin 3 blue and pin 4 black. The electrical function of each conductor must be checked against the connected equipment's wiring diagram.
Yes. The cable is specified as drag-chain suitable, with a minimum bending radius of ten times its outer diameter. The installation must comply with the manufacturer's mechanical requirements.
The cable has a grey polyurethane (PUR) outer sheath that provides resistance to oils, chemicals, hydrolysis, microbes and UV radiation.
The WAGO 756-3101/040-050 is specified for operating temperatures from −30 to +80 °C in both moving and stationary installations.
The principal difference is cable length. The WAGO 756-3101/040-050 is 5 m long, while the 756-3101/040-020 is 2 m long. Both feature a straight, four-pole, A-coded M12 female socket and a free cable end.
The WAGO 756-3101/040-050 combines a 5 m four-core industrial power cable with a straight M12 A-coded female socket and a durable grey PUR sheath. Its flexible stranded conductors, drag-chain suitability and resistance to industrial environmental conditions make it a practical connection solution for compatible automation and machine-control equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.