Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£16.90
The WAGO 756-3101/040-020 is a 2 m, 4-core industrial power supply cable featuring a straight, 4-pole, A-coded M12 female socket at one end and a free cable end at the other. Part of the WAGO 756 Series, it is designed for reliable electrical connections in industrial automation systems, distributed I/O installations and machinery requiring robust M12 power cabling.
The cable features four 0.75 mm² copper conductors, a durable grey polyurethane (PUR) outer sheath and a halogen-free construction. Its connector is rated for 250 V AC/DC and 4 A, making it suitable for compatible industrial power and control circuits within the specified electrical ratings.
With an IP67-rated M12 connection when correctly mated, drag-chain suitability and resistance to oil, chemicals, hydrolysis, microbes and ultraviolet radiation, the WAGO 756-3101/040-020 is designed for demanding industrial environments.
Product availability: WAGO identifies this part number as discontinued. Availability may therefore be limited to remaining distributor or replacement stock.
The WAGO 756-3101/040-020 provides a convenient connection between compatible M12 A-coded equipment and an application-specific power or control circuit. Its straight female M12 socket is factory-fitted, while the opposite end remains free for termination within a suitable enclosure, terminal block or other approved connection arrangement.
The cable contains four 0.75 mm² copper conductors, with the following connector pin assignments:
These conductor colours identify the individual cable cores. Their electrical functions must be determined from the connected equipment's wiring documentation rather than assumed from colour alone.
The 250 V AC/DC and 4 A ratings describe the specified connector operating limits. Actual circuit suitability depends on the connected equipment, wiring arrangement, installation conditions and applicable electrical standards.
The WAGO 756-3101/040-020 uses a grey polyurethane outer sheath designed to withstand demanding industrial conditions. Its resistance to oils, chemicals, microbes, hydrolysis and UV radiation makes it suitable for machinery and factory automation environments where conventional cabling may deteriorate more quickly.
The cable is specified for drag-chain applications and has a minimum bending radius of ten times its outer diameter for flexible use. WAGO specifies approximately four million bending cycles under defined test conditions. Actual cable life depends on the installation geometry, movement, mechanical loading and environmental conditions.
The straight M12 connector provides IP67 protection when correctly mated with a compatible counterpart. The free cable end must be properly terminated and protected to maintain the required environmental protection of the complete installation.
| Manufacturer | WAGO |
|---|---|
| Series | 756 |
| Part number | 756-3101/040-020 |
| Product designation | Power cable; M12A socket; straight; 4-pole; length 2 m |
| Product type | Industrial power supply cable assembly |
| Connection type | M12 socket to free cable end |
| Connector 1 | M12 female socket |
| Connector coding | A-coded |
| Connector orientation | Straight, 0° |
| Connector 2 | Free cable end |
| Number of poles | 4 |
| Number of conductors | 4 |
| Cable length | 2 m |
| Conductor cross-section | 0.75 mm² |
| Conductor configuration | 4 × 0.75 mm² |
| Conductor construction | Bare copper wire, 40 × 0.15 mm |
| Conductor insulation | PP9Y, halogen-free |
| Cable type code | Lif9YH-11YH 4 × 0.75 mm² |
| Outer sheath material | Polyurethane (PUR) |
| Outer sheath colour | Grey |
| Cable outer diameter | 6–6.4 mm |
| Operating voltage | 250 V AC/DC |
| Operating current | 4 A |
| Rated impulse withstand voltage | 2.5 kV |
| Contact resistance | 10 mΩ |
| Insulation resistance | Greater than 109 Ω |
| Conductor resistance | ≤ 26 Ω/km |
| Minimum bending radius, flexible application | 10 × cable diameter |
| Bending endurance | Approximately 4 million cycles under specified conditions |
| Drag-chain suitability | Yes |
| Operating temperature, dynamic | −30 to +80 °C |
| Operating temperature, static | −30 to +80 °C |
| Protection rating | IP67 when correctly mated |
| Connector housing material | Thermoplastic polyurethane (TPU) |
| Connector housing colour | Black, approximately RAL 9005 |
| Connector tightening torque | 1 Nm |
| Pollution degree | 3/2 according to IEC 60664-1 |
| Halogen-free | Yes |
| Silicone-free | Yes |
| CFC-free | Yes |
| Oil resistance | Yes |
| Chemical resistance | Yes |
| Hydrolysis resistance | Yes |
| Microbial resistance | Yes |
| UV resistance | Yes |
| UL approval | UL 2238, file E519602 |
| Weight | Approximately 130 g |
| Country of origin | Germany |
| GTIN | 4045454772383 |
| Manufacturer lifecycle status | Discontinued |
The WAGO 756-3101/040-020 is a 2 m industrial power supply cable used to connect compatible equipment with a four-pole M12 A-coded interface. It has a straight female M12 socket and one free cable end.
The cable has a manufactured length of 2 m, making it suitable for short industrial power and control connections.
The cable features a straight, four-pole, A-coded M12 female socket at one end. The other end is unterminated for application-specific wiring.
The cable contains four stranded copper conductors, each with a cross-section of 0.75 mm².
The WAGO 756-3101/040-020 has an operating voltage rating of 250 V AC/DC and an operating current rating of 4 A.
The conductor assignment is pin 1 brown, pin 2 white, pin 3 blue and pin 4 black. The electrical function of each conductor must be confirmed against the connected equipment's wiring diagram.
Yes. The cable is drag-chain suitable, with a minimum flexible bending radius of ten times the cable diameter and approximately four million bending cycles under specified test conditions.
The M12 connector provides IP67 protection when correctly mated with a compatible counterpart. The free cable end must be appropriately terminated and protected.
The WAGO 756-3101/040-020 is specified for an operating temperature range of −30 to +80 °C in both static and dynamic applications.
Yes. WAGO identifies the 756-3101/040-020 as discontinued. Remaining stock may still be available through distributors, but ongoing manufacturer supply should not be assumed.
The WAGO 756-3101/040-020 combines a 2 m four-core PUR power cable with a straight M12 A-coded female connector and an unterminated cable end. Its robust construction, drag-chain suitability and IP67-rated mating interface make it a practical choice for maintaining compatible industrial power and control connections, subject to its discontinued product status.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.