Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.6955
The WAGO 2004-434 is an insulated push-in jumper from the WAGO TOPJOB® S terminal block accessory range, designed to establish electrical connections between selected terminals within compatible DIN rail terminal assemblies. Featuring a 1-to-4 bridging configuration, a 32 A nominal current rating and a light grey insulated housing, it provides a compact solution for distributing a common electrical potential across appropriately positioned terminal blocks.
Unlike a conventional four-way adjacent-terminal jumper, the WAGO 2004-434 is identified by the manufacturer as a jumper from position 1 to position 4. This configuration enables a cross-connection between designated terminal positions while accommodating the spacing required by the terminal arrangement.
The jumper uses a push-in flat-pin connection system and is designed for compatible WAGO TOPJOB® S 2004 series terminal blocks. Its insulated construction helps provide protection against unintended contact when correctly installed as part of a complete terminal assembly.
With a 32 A nominal current rating, 800 V rated voltage and approximately 18.7 mm modular spacing, the WAGO 2004-434 supports efficient terminal bridging in industrial automation, control panels, machinery and electrical distribution applications.
For electrical engineers and panel builders, this purpose-designed jumper offers an efficient alternative to additional wired links, helping maintain a tidy terminal strip and simplifying common-potential distribution.
The WAGO 2004-434 is designed to simplify electrical bridging within compatible WAGO TOPJOB® S terminal strips. Its purpose-designed configuration allows designated terminal positions to be electrically connected using an insulated push-in jumper rather than separate lengths of connecting wire.
In industrial control panels and automation cabinets, several terminals may need to share the same electrical potential. Conventional wiring arrangements can require additional conductors, ferrules and installation time. A suitable push-in jumper provides a more compact method of establishing the required common connection.
The WAGO 2004-434 is specifically described as a jumper from position 1 to position 4. This is an important distinction when selecting the correct accessory. It should not be confused with a conventional four-way jumper that connects four consecutive terminal positions.
The jumper's flat-pin contacts interface with compatible terminal block jumper slots. When inserted correctly, the conductive elements establish the intended electrical bridge, while the insulating housing helps provide protection against unintended contact.
The manufacturer specifies a 32 A nominal current rating for the WAGO 2004-434. The permissible current of the completed connection must also account for the electrical ratings of the terminal blocks, connected conductors and installation conditions.
Its 800 V rated voltage supports use in suitably rated electrical installations. The jumper does not increase the rated voltage of the terminal blocks into which it is installed; the lowest applicable rating within the complete assembly must be respected.
The specified 18.7 mm modular spacing is relevant when planning the terminal strip arrangement. The correct jumper must be selected according to the terminal block series, connection positions and physical spacing.
The light grey insulating housing helps the WAGO 2004-434 integrate visually with other TOPJOB® S accessories. Its compact construction supports neat terminal strip layouts and can help reduce the number of separate wire links required during panel manufacture.
WAGO offers a family of related insulated push-in jumpers, including the 2004-433 for positions 1 to 3 and the 2004-435 for positions 1 to 5. Selecting the correct configuration ensures that only the intended terminal positions are electrically connected.
Installation consideration: Before fitting the jumper, verify that the terminal blocks are compatible and that the intended bridging arrangement matches the electrical schematic. Jumper insertion and removal should be performed with the circuit safely isolated in accordance with approved electrical working procedures.
The WAGO 2004-434 is a cross-connection accessory, not a protective device, fuse, isolator or standalone conductor terminal. Its purpose is to provide a defined electrical connection within an appropriately designed terminal assembly.
Tick the specs you need, then view products that match.
| Terminal Type | Jumper / Cross-connector (accessory) | |
|---|---|---|
| Colour | Grey | |
| Product Series | WAGO TOPJOB S | |
| Rated current In | 32 A | |
| Modular spacing | 18.7 mm | |
| Number of bridged clamps | 2 | |
| Model | Transverse connector | |
| With contact protection | Yes | |
| Rated voltage | 800 V | |
| Insulated | Yes | |
| Colour | Grey | |
| Explosion-tested version 'Ex e' | Yes | |
| Mounting method | Pluggable | |
| Manufacturer | WAGO | |
| Manufacturer part number | 2004-434 | |
| Product family | TOPJOB® S | |
| Product series | 2004 | |
| Product type | Push-in jumper | |
| Accessory category | Terminal block cross-connection accessories | |
| Manufacturer designation | Jumper; from 1 to 4; insulated; light grey | |
| Jumper configuration | From position 1 to position 4 | |
| Connection function | Electrical cross-connection between designated terminal positions | |
| Contact style | Flat pins | |
| Nominal current | 32 A | |
| Housing colour | Light grey | |
| Approximate weight | 2.1 g | |
| Fire load | 0.012 MJ | |
| Compatible product range | Selected WAGO TOPJOB® S 2004 series terminal blocks | |
| RoHS compliance | Yes | |
| Country of origin | Germany | |
| Manufacturer packaging unit | 25 pieces | |
| Related jumper | WAGO 2004-440 — from 1 to 10 |
The WAGO 2004-434 is an insulated push-in jumper used to establish electrical cross-connections between designated positions in compatible WAGO TOPJOB® S terminal block assemblies.
The designation from 1 to 4 describes the jumper's intended bridging arrangement between designated terminal positions. It should not be confused with a conventional four-way jumper that connects four consecutive terminals.
The WAGO 2004-434 has a 32 A nominal current rating. The complete terminal assembly must also comply with the ratings of the connected terminals, conductors and associated equipment.
The jumper has a rated voltage of 800 V. The maximum permissible operating voltage of the completed assembly depends on the ratings of all installed components.
Yes. The WAGO 2004-434 is an insulated push-in jumper with a light grey housing designed for use with compatible WAGO terminal blocks.
The jumper is designed for selected WAGO TOPJOB® S 2004 series terminal blocks. Compatibility should be checked against the specific terminal block manufacturer's accessory information.
The WAGO 2004-434 has an approximately 18.7 mm modular spacing, corresponding to its designated bridging configuration.
The WAGO 2004-434 has a light grey insulating housing.
The jumper is inserted into the designated jumper slots of compatible WAGO terminal blocks. Installation should follow the manufacturer's instructions, with the circuit safely isolated before work begins.
Yes, in suitable applications the WAGO 2004-434 can replace separate conductor links between the designated terminal positions, provided the jumper configuration, current rating and terminal compatibility meet the electrical design requirements.
The WAGO 2004-433 is designated for bridging from position 1 to position 3, while the WAGO 2004-434 is designated for bridging from position 1 to position 4. Both belong to the WAGO insulated push-in jumper accessory range.
No. The WAGO 2004-434 is an electrical cross-connection jumper. It does not provide overcurrent protection, electrical isolation or switching functionality.
Yes. The WAGO 2004-434 is identified as RoHS compliant.
The manufacturer packaging quantity is 25 pieces. Actual sales quantities may vary depending on the supplier.
WAGO TOPJOB® S insulated push-in jumpers provide efficient, modular solutions for electrical cross-connections in professional terminal assemblies. The WAGO 2004-434 combines a 1-to-4 bridging configuration, 32 A nominal current rating, 800 V rated voltage and light grey insulated construction to support compact, organised and reliable common-potential distribution in compatible industrial electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.