Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.468
The WAGO 2004-433 is an insulated push-in jumper with a 1-to-3 connection arrangement, designed for electrical cross-connections between compatible WAGO TOPJOB S terminal blocks. Featuring a 32 A rated current, 800 V nominal voltage and a light grey insulating body, this compact jumper provides a practical solution for creating common electrical potentials across selected terminal positions.
Unlike a conventional three-way jumper that connects three consecutive terminals, the WAGO 2004-433 bridges terminal positions 1 and 3, allowing the intermediate position to be skipped. This selective connection arrangement is particularly useful in electrical control panels and distribution assemblies where adjacent terminal circuits must remain electrically separate while selected positions share a common potential.
Part of the WAGO TOPJOB S accessory range, the 2004-433 features a compact 16.5 mm width, flat-pin connection design and push-in installation. Its purpose-designed construction supports efficient terminal strip assembly without requiring additional external bridging wires.
The WAGO 2004-433 is specifically designed for electrical installations where two terminal positions must share a common potential while an intermediate terminal remains outside that connection. Its 1-to-3 jumper assignment provides this selective bridging function without requiring external wire links.
When fitted to compatible TOPJOB S terminal blocks, the jumper's conductive contacts establish an electrical connection between the first and third positions. The intermediate position is not electrically connected by the jumper, allowing a separate circuit or potential to be maintained at that location.
This arrangement is particularly useful in industrial control panels, electrical distribution systems and automation cabinets where circuit layouts require selective commoning rather than continuous bridging across consecutive terminal blocks.
The jumper features an 800 V nominal voltage rating and a 32 A rated current. For applications covered by the relevant Ex e II requirements, the published rated current is 30 A. The permissible electrical loading of the completed assembly must also account for the ratings of the terminal blocks, conductors and associated equipment.
Its light grey insulated housing and compact dimensions allow it to integrate neatly into compatible terminal strips. Installation is carried out by inserting the jumper contacts into the designated jumper slots, following WAGO's instructions and with the electrical circuit safely isolated.
Important installation consideration: The WAGO 2004-433 is a conductive bridging accessory, not an electrical isolator or protective device. It must only be used with terminal blocks and circuit arrangements for which WAGO specifies compatibility. The jumper should not be confused with the WAGO 2004-403, which is designed to connect three consecutive terminal positions.
Tick the specs you need, then view products that match.
| Terminal Type | Jumper / Cross-connector (accessory) | |
|---|---|---|
| Colour | Grey | |
| Product Series | WAGO TOPJOB S | |
| Rated current In | 32 A | |
| Modular spacing | 12.4 mm | |
| Number of bridged clamps | 2 | |
| Model | Transverse connector | |
| With contact protection | Yes | |
| Rated voltage | 800 V | |
| Insulated | Yes | |
| Colour | Grey | |
| Explosion-tested version 'Ex e' | Yes | |
| Mounting method | Pluggable | |
| Manufacturer | WAGO | |
| Product family | TOPJOB S | |
| Series | 2004 | |
| Model / Order code | 2004-433 | |
| Product type | Insulated push-in jumper | |
| Accessory category | Terminal block cross-connection jumper | |
| Jumper assignment | 1–3 | |
| Connection arrangement | Positions 1 and 3 connected, intermediate position skipped | |
| Contact style | Flat pins | |
| Electrical function | Selective common-potential connection | |
| Nominal voltage (III/3) | 800 V | |
| Rated current | 32 A | |
| Rated current (Ex e II) | 30 A | |
| Insulation | Insulated jumper body | |
| Compatible product range | WAGO TOPJOB S terminal blocks with compatible jumper slots | |
| Width | 16.5 mm | |
| Height | 4.1 mm | |
| Depth | 19 mm | |
| Weight | Approximately 1.7 g | |
| Fire load | 0.01 MJ | |
| Environmental compliance | RoHS compliant | |
| Product group | 22 (TOPJOB S) | |
| ETIM classification | EC000489 | |
| Manufacturer packaging unit | 25 pieces | |
| Packaging type | Bag | |
| Country of origin | Germany | |
| GTIN / EAN | 4055143700689 |
The WAGO 2004-433 is an insulated push-in jumper used to electrically connect positions 1 and 3 of compatible TOPJOB S terminal block assemblies while skipping the intermediate position.
The 1-to-3 arrangement means the jumper connects the first and third terminal positions without electrically connecting the intermediate position through the jumper. This allows selective potential distribution across a terminal strip.
No. A standard three-way jumper connects three consecutive terminal positions. The WAGO 2004-433 connects positions 1 and 3, leaving the middle position unconnected by the jumper.
The WAGO 2004-433 has a 32 A rated current. The published rated current for Ex e II applications is 30 A, subject to the applicable installation and approval conditions.
The WAGO 2004-433 has an 800 V nominal voltage rating under the manufacturer's IEC/EN rating conditions.
The WAGO 2004-433 measures 16.5 mm wide, 4.1 mm high and 19 mm deep.
Yes. The WAGO 2004-433 has a light grey insulated body designed for use as a cross-connection accessory in compatible TOPJOB S terminal assemblies.
The WAGO 2004-433 is designed for compatible WAGO TOPJOB S terminal blocks, including suitable 2004 series terminals with the required jumper slots. Exact compatibility must be verified against the manufacturer's accessory documentation.
The jumper is installed by inserting its flat-pin contacts into the designated jumper slots of compatible terminal blocks. The circuit must be safely isolated before installation or removal.
The WAGO 2004-433 selectively connects positions 1 and 3 while skipping position 2. The WAGO 2004-403 is a conventional three-way jumper that electrically connects three consecutive terminal positions.
The WAGO 2004-433 has a 1-to-3 jumper assignment, while the WAGO 2004-434 has a 1-to-4 assignment. Both are insulated selective bridging accessories for compatible TOPJOB S terminal blocks.
Yes. Where the circuit and terminal arrangement are compatible, the WAGO 2004-433 provides a direct electrical connection between selected terminal positions without requiring an additional external wire link.
No. The WAGO 2004-433 is a conductive jumper that electrically connects selected terminals. It does not provide circuit isolation, switching or overcurrent protection.
WAGO publishes a 30 A rated current for Ex e II applications. Suitability for a particular hazardous-area installation depends on the relevant equipment approvals, installation conditions and complete terminal assembly.
The manufacturer's standard packaging unit is 25 pieces, supplied in a bag. Distributor order quantities may vary.
The manufacturer's GTIN / EAN for the WAGO 2004-433 is 4055143700689.
WAGO TOPJOB S terminal block accessories support electrical engineers, control panel builders and automation professionals in creating compact and organised electrical connections. The WAGO 2004-433 combines selective 1-to-3 bridging, a 32 A rated current and an insulated push-in design, providing a practical solution for common-potential distribution where intermediate terminal positions must remain electrically separate.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.