Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.09
The WAGO 2004-406 is a high-quality 6-way insulated push-in jumper bar designed for electrically connecting adjacent, compatible WAGO TOPJOB® S 2004 series DIN-rail terminal blocks. This practical terminal block accessory enables efficient potential distribution across six terminal positions, reducing the need for individual bridging wires and helping maintain organised electrical control panels.
Featuring a 32 A IEC rated current and 800 V rated voltage, the WAGO 2004-406 provides a dependable cross-connection solution for industrial automation, electrical distribution and control cabinet applications. Its six-pole configuration allows a common electrical potential to be distributed across six compatible terminal connections using a single push-in jumper.
Manufactured with a durable light grey insulating housing, the WAGO 2004-406 combines electrical performance with compact dimensions of 35.2 × 19 × 4.1 mm. Its push-in design simplifies installation and helps reduce wiring time, making it a practical choice for panel builders, electrical engineers and maintenance professionals working with WAGO TOPJOB® S terminal systems.
The WAGO 2004-406 is designed to simplify the electrical interconnection of compatible WAGO TOPJOB® S terminal blocks. Rather than using individual wires to connect multiple adjacent terminals, the jumper bar provides a single conductive bridging element that distributes a common electrical potential across six terminal positions.
This arrangement is particularly useful in industrial control panels where several circuits require the same supply potential. Typical examples include distributing a common control voltage, connecting shared supply terminals or organising power distribution points within a DIN-rail terminal strip. By reducing the number of separate bridging conductors, the jumper helps minimise wiring complexity and installation time.
The push-in jumper design allows the accessory to be inserted directly into the designated jumper slots of compatible terminal blocks. Once correctly installed, the conductive pins establish the intended electrical connection between the six terminal positions. No separate jumper wires, conductor stripping or screw-fastened bridge connections are required.
The WAGO 2004-406 has an 800 V IEC rated voltage and 32 A rated current under the specified IEC/EN 60664-1 conditions. These ratings apply to the jumper itself; the permissible operating limits of the complete assembly must also account for the terminal blocks, conductors, connected equipment and installation conditions.
For applications covered by the relevant increased-safety explosion-protection approvals, the jumper has a specified Ex e II rated current of 30 A. This does not mean that every installation using the jumper is automatically suitable for hazardous areas. The complete terminal assembly must satisfy the applicable approvals, component restrictions and installation requirements.
Its light grey insulated housing helps protect the conductive bridging element and provides a consistent appearance within compatible WAGO terminal assemblies. The compact 35.2 × 19 × 4.1 mm construction is designed for efficient use of space, while the 6.2 mm modular spacing matches the intended jumper position arrangement.
The WAGO 2004-406 is a straight six-way common-potential jumper. It electrically connects all six designated positions and must not be confused with the WAGO 2004-406/020-000 delta jumper, which has a different bridging configuration. Engineers should verify the required connection pattern and terminal block compatibility before installation.
Tick the specs you need, then view products that match.
| Terminal Type | Jumper / Cross-connector (accessory) | |
|---|---|---|
| Colour | Grey | |
| Product Series | WAGO TOPJOB S | |
| Rated current In | 32 A | |
| Modular spacing | 6.2 mm | |
| Number of bridged clamps | 6 | |
| Model | Transverse connector | |
| With contact protection | Yes | |
| Rated voltage | 800 V | |
| Insulated | Yes | |
| Colour | Grey | |
| Explosion-tested version 'Ex e' | Yes | |
| Mounting method | Pluggable | |
| Manufacturer | WAGO | |
| Product family | TOPJOB® S | |
| Series | 2004 | |
| Product group | 22 (TOPJOB® S) | |
| Manufacturer part number | 2004-406 | |
| Product type | Insulated push-in jumper bar | |
| Accessory category | Terminal block cross-connection jumper | |
| Connection configuration | 6-way | |
| Number of bridged terminal positions | 6 | |
| Electrical function | Common potential distribution | |
| Connection style | Push-in, flat-pin | |
| Compatible terminal block family | WAGO TOPJOB® S 2004 series, where specified | |
| Rated voltage (IEC/EN 60664-1, III/3) | 800 V | |
| Rated current (IEC) | 32 A | |
| Rated current (Ex e II) | 30 A | |
| Overvoltage category | III | |
| Pollution degree | 3 | |
| Width | 35.2 mm | |
| Height | 19 mm | |
| Depth | 4.1 mm | |
| Dimensions (W × H × D) | 35.2 × 19 × 4.1 mm | |
| Construction | Insulated conductive jumper | |
| Fire load | 0.022 MJ | |
| Weight | Approximately 4.7 g | |
| Packaging type | Bag | |
| Country of origin | Germany | |
| RoHS status | Compliant | |
| GTIN / EAN | 4017332069465 | |
| Related 2-way jumper | WAGO 2004-402 | |
| Related 4-way jumper | WAGO 2004-404 | |
| Related 5-way jumper | WAGO 2004-405 | |
| Related 7-way jumper | WAGO 2004-407 | |
| Related 10-way jumper | WAGO 2004-410 |
The WAGO 2004-406 is a 6-way insulated push-in jumper bar used to electrically bridge six compatible WAGO TOPJOB® S terminal positions. It distributes a common potential across the connected terminals, reducing the need for individual bridging wires in electrical control panels and distribution assemblies.
The WAGO 2004-406 has an 800 V IEC rated voltage and 32 A rated current under the specified IEC/EN conditions. For applications subject to the applicable Ex e II approval, the specified rated current is 30 A. The complete electrical assembly must remain within the ratings of all connected components.
The WAGO 2004-406 provides six bridging positions and is designed to connect six adjacent, compatible terminal positions to the same electrical potential. It has a 6.2 mm modular spacing and must be used only with terminal blocks that support this jumper configuration.
The WAGO 2004-406 is a standard 6-way jumper that connects all six designated terminal positions to one common potential. The WAGO 2004-406/020-000 is a delta jumper designed for a different bridging arrangement, with connections grouped as 1–2, 3–4 and 5–6. The correct accessory depends on the electrical connection pattern required.
The WAGO 2004-406 is installed by inserting its conductive jumper pins into the designated jumper slots of compatible WAGO TOPJOB® S terminal blocks. Its push-in design eliminates the need for separate bridging conductors or screw-fastened jumpers. Installation should be performed with the circuit safely isolated and in accordance with WAGO's instructions.
WAGO TOPJOB® S jumper accessories are designed to help electrical engineers and panel builders create reliable, organised and space-efficient terminal assemblies. The WAGO 2004-406 combines six-way common-potential distribution, a 32 A IEC rated current, 800 V rated voltage and insulated push-in construction, making it a practical solution for industrial automation, control panel wiring and electrical distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.