Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.18
The WAGO 862-1525 is a professional 5-pole, 4-conductor chassis-mount terminal strip designed for organised electrical connections in control panels, machinery, lighting equipment and electrical enclosures. Featuring Push-in CAGE CLAMP® spring-pressure connection technology, this black terminal strip combines convenient conductor termination with a compact snap-in mounting design.
With four conductor connection points per pole, the WAGO 862-1525 provides 20 conductor connection points across five electrically separate poles. Each group of four connection points is electrically common, allowing compatible conductors to be joined or distributed within a single pole.
A distinguishing feature of this model is its factory-applied PE-N-L1-L2-L3 marking, providing clear identification for electrical installation and maintenance. However, the product is explicitly specified without an integrated ground contact. The PE marking does not make the corresponding pole a dedicated protective-earth terminal or provide an automatic earth connection to the chassis.
The WAGO 862-1525 features snap-in mounting feet at positions 2 and 4, allowing installation into a suitably prepared chassis or mounting panel. This arrangement is particularly useful for electrical equipment manufacturing and repeatable panel assembly.
Rated at 32 A and 500 V under the specified IEC/EN conditions, the terminal strip supports suitable solid, stranded and fine-stranded copper conductors from 0.5–4 mm². Its compact dimensions of 60 mm wide and 35 mm deep make it suitable for space-conscious electrical equipment designs.
The WAGO 862-1525 features the factory-applied identification sequence:
PE – N – L1 – L2 – L3
This marking is intended to help installers identify the five pole positions when wiring appropriately designed electrical equipment.
The marking can be particularly useful in assemblies where a consistent terminal layout is required for manufacturing, servicing and maintenance.
Critical distinction: Although the first position is marked PE, WAGO specifies the 862-1525 as a product without ground contact. The terminal strip does not provide an integrated protective-earth connection to the chassis.
Where the PE-marked position is intended to carry a protective conductor, the complete protective-earth arrangement must be separately designed, verified and compliant with the applicable electrical safety requirements. The presence of a PE label alone must not be treated as evidence of protective-earth continuity.
The five poles are otherwise electrically separate, with four connection points sharing the same potential within each pole.
The WAGO 862-1525 is designed for snap-in chassis mounting rather than conventional DIN rail installation.
Its integrated mounting feet are positioned at pole locations 2 and 4, allowing the terminal strip to engage with appropriately prepared openings in an equipment panel.
This mounting arrangement can reduce the need for separate terminal-strip fixing screws and supports repeatable assembly in electrical manufacturing environments.
Before installation, the panel's mounting holes, spacing, thickness and tolerances should be checked against the official WAGO dimensional drawing.
The terminal strip must be securely seated and sufficient clearance must be provided for the connected conductors, push-buttons and any testing accessories.
Note: WAGO 862 Series terminal strips are available with several different mounting arrangements. A visually similar product may not be mechanically interchangeable with the 862-1525.
The WAGO 862-1525 uses Push-in CAGE CLAMP® technology, which secures conductors using a spring-pressure clamping mechanism rather than a conventional conductor clamping screw.
Suitable solid copper conductors from 0.75–4 mm² can be inserted directly after correct preparation.
Other permitted conductor types can be terminated by operating the spring clamp using the integrated push-button or an appropriate tool.
The terminal strip supports:
The manufacturer specifies a 10–11 mm conductor stripping length. Conductors must be prepared correctly and inserted fully into the terminal.
For fine-stranded conductors, ferrule selection and direct push-in suitability must follow WAGO's installation instructions.
The WAGO 862-1525 provides 20 connection points arranged as five separate groups of four.
Within each group, all four connection points share one electrical potential. This allows compatible conductors to be connected together or distributed within the same pole.
Each of the five poles is electrically isolated from the others, making the terminal strip suitable for assemblies requiring several distinct connection groups.
The factory-applied PE-N-L1-L2-L3 markings help identify the intended terminal positions, but actual circuit assignments and protective-earth provisions must be determined by the equipment design.
The terminal strip's 32 A current rating and 500 V voltage rating apply under the specified IEC/EN conditions. The conductor size, installation environment and protective devices must also be suitable for the intended circuit.
Safety note: Installation must be carried out by competent persons in accordance with the latest WAGO instructions and applicable electrical standards.
Important: The standard WAGO 862-1525 should not be assumed to have the hazardous-area certification of the 862-1525/999-950 variant.
Tick the specs you need, then view products that match.
| Current | 32 A | |
|---|---|---|
| Voltage | 500 V | |
| Colour | Black | |
| Connection | Spring clamp | |
| Product Series | WAGO 862 | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.75 – 2.5 mm² | |
| Height | 35 mm | |
| Operating temperature | 105 – 105 °C | |
| Number of poles | 5 | |
| Rated current In | 32 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.5 – 4 mm² | |
| Number of clamp positions per pole | 4 | |
| Rated voltage | 500 V | |
| Width | 60 mm | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Type of electrical connection 1 | Spring clamp connection | |
| Colour | Black | |
| Connectable conductor cross section multi-wired | 0.5 – 4 mm² | |
| Connectable conductor cross section solid-core | 0.5 – 4 mm² | |
| Depth | 22.3 mm | |
| Mounting method | Other | |
| Manufacturer | WAGO | |
| Manufacturer part number | 862-1525 | |
| Product series | WAGO 862 Series | |
| Product type | 4-conductor chassis-mount terminal strip | |
| Connections per pole | 4 | |
| Total conductor connection points | 20 | |
| Number of electrical potentials | 5 | |
| Factory marking | PE-N-L1-L2-L3 | |
| Integrated ground contact | No | |
| Connection technology | Push-in CAGE CLAMP® | |
| Actuation | Push-button / suitable operating tool | |
| Conductor material | Copper | |
| Wiring direction | Side-entry | |
| Rated voltage (IEC/EN, III/3) | 500 V | |
| Rated current | 32 A | |
| Rated impulse voltage | 6 kV | |
| Overvoltage category | III | |
| Pollution degree | 3 | |
| Nominal conductor cross-section | 4 mm² | |
| Solid conductor range | 0.5–4 mm² | |
| Solid conductor direct push-in range | 0.75–4 mm² | |
| Stranded conductor range | 0.5–4 mm² | |
| Fine-stranded conductor range | 0.5–4 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.5–2.5 mm² | |
| Fine-stranded conductor with suitable ferrule, direct push-in | From 0.75 mm², subject to manufacturer requirements | |
| AWG conductor range | 20–12 AWG | |
| Conductor stripping length | 10–11 mm | |
| Snap-in mounting foot positions | 2 and 4 | |
| Pole spacing | 12 mm | |
| Overall width | 60 mm | |
| Height above mounting surface | 22.3 mm | |
| Overall depth | 35 mm | |
| Housing colour | Black | |
| Insulation material | Polyamide PA66 | |
| Flammability classification | UL 94 V-0 | |
| Halogen-free | Yes | |
| Fire load | 0.643 MJ | |
| Individual product weight | Approximately 34.164 g | |
| Manufacturer packaging unit | 200 pieces | |
| Packaging type | Bag | |
| Country of origin | Germany | |
| GTIN / EAN | 4044918509527 | |
| Customs tariff number | 85369010000 |
The WAGO 862-1525 is a black, five-pole chassis-mount terminal strip with four conductor connections per pole, Push-in CAGE CLAMP® technology, PE-N-L1-L2-L3 marking and snap-in mounting feet at positions 2 and 4.
It provides 20 conductor connection points arranged across five electrically separate poles, with four connections per pole.
The standard WAGO 862-1525 is rated at 32 A and 500 V, with a 6 kV rated impulse voltage, under the specified IEC/EN conditions.
No. Although it is marked PE-N-L1-L2-L3, the WAGO 862-1525 is explicitly specified without an integrated ground contact. The PE marking does not provide automatic protective-earth continuity to the chassis.
These are factory-applied markings identifying five intended connection positions: protective earth, neutral and three line positions. The markings do not change the terminal strip's construction or provide an integrated protective-earth contact.
The terminal strip supports suitable solid, stranded and fine-stranded copper conductors from 0.5–4 mm². Fine-stranded conductors with insulated ferrules are specified from 0.5–2.5 mm².
Yes. Suitable solid copper conductors from 0.75–4 mm² can be connected using direct push-in termination after correct preparation.
The manufacturer specifies a 10–11 mm stripping length.
It uses snap-in chassis mounting feet at positions 2 and 4. The chassis must be prepared according to the manufacturer's dimensional drawing.
The terminal strip is 60 mm wide and 35 mm deep, with a 22.3 mm height above the mounting surface and 12 mm pole spacing.
The standard WAGO 862-1525 should not be treated as a hazardous-area-certified product. The separate 862-1525/999-950 variant is specified for certain Ex e II applications. Always verify the exact part number, approvals and installation conditions.
The manufacturer's GTIN / EAN is 4044918509527.
The WAGO 862-1525 combines five electrically separate poles, 20 conductor connection points, Push-in CAGE CLAMP® technology and factory-applied PE-N-L1-L2-L3 markings. Its snap-in mounting feet at positions 2 and 4, compact black housing and 32 A / 500 V ratings make it a practical choice for professional electrical equipment assembly. The product is supplied without an integrated ground contact.
Manufacturer references: WAGO 862-1525 official product page and WAGO 862-1525 technical datasheet. Always verify the latest manufacturer instructions before installation.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.