Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.21
The WAGO 862-1503/999-950 is a 3-pole, 4-conductor chassis-mount terminal strip designed for dependable electrical connections in industrial equipment, control panels and installations requiring components suitable for Ex e II applications. Part of the WAGO 862 Series, this black terminal strip uses Push-in CAGE CLAMP® spring-pressure connection technology to provide secure conductor termination without conventional screw terminals.
Featuring 12 conductor connection points across three electrical potentials, the WAGO 862-1503/999-950 provides four conductor connections per pole. The terminal strip carries PE-N-L1 identification markings for clear wiring reference, although the manufacturer specifies that this version is without a dedicated protective earth contact. The markings must therefore not be interpreted as confirmation of an integrated PE connection.
With a 28 A rated current and a 440 V rated voltage for Ex e II applications, the WAGO 862-1503/999-950 is suitable for appropriately designed electrical assemblies. Its 0.5–4 mm² conductor connection range, compact dimensions and screw-mounting arrangement make it a practical solution for equipment manufacturers requiring reliable spring-pressure connections in demanding industrial environments.
The WAGO 862-1503/999-950 provides a compact connection system for industrial electrical equipment requiring multiple conductor terminations across three separate potentials. Its Push-in CAGE CLAMP® spring-pressure technology supports secure conductor connections, while the four connection points per pole allow multiple conductors to be organised within one terminal strip. The PE-N-L1 markings provide a useful identification reference during wiring and inspection.
Unlike standard 862 Series variants, the 862-1503/999-950 is specifically designated as suitable for Ex e II applications. This makes it relevant to electrical equipment designed for applicable increased-safety environments, subject to the manufacturer's conditions of use. Ex suitability does not mean that the terminal strip alone makes an enclosure or installation explosion-protected; the complete assembly must meet the relevant hazardous-area requirements, including certification, protection, mounting and electrical ratings.
Tick the specs you need, then view products that match.
| Current | 28 A | |
|---|---|---|
| Voltage | 440 V | |
| Colour | Black | |
| Connection | Spring clamp | |
| Product Series | WAGO 862 | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.75 – 2.5 mm² | |
| Height | 35 mm | |
| Operating temperature | 105 – 105 °C | |
| Number of poles | 3 | |
| Rated current In | 28 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.5 – 4 mm² | |
| Number of clamp positions per pole | 4 | |
| Rated voltage | 440 V | |
| Width | 36 mm | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Type of electrical connection 1 | Spring clamp connection | |
| Colour | Black | |
| Explosion-tested version 'Ex e' | Yes | |
| Connectable conductor cross section multi-wired | 0.5 – 4 mm² | |
| Connectable conductor cross section solid-core | 0.5 – 4 mm² | |
| Depth | 22.3 mm | |
| Mounting method | Other | |
| Manufacturer | WAGO | |
| Series | 862 Series | |
| Model | 862-1503/999-950 | |
| Product designation | 4-conductor chassis-mount terminal strip; suitable for Ex e II applications; without ground contact; PE-N-L1; 3-pole; for 3 mm diameter screw and nut; 4 mm²; black | |
| Product type | Chassis-mount terminal strip | |
| Product category | Field-wiring terminal blocks | |
| Application suitability | Ex e II | |
| Conductor connections per pole | 4 | |
| Total connection points | 12 | |
| Total electrical potentials | 3 | |
| Terminal identification | PE-N-L1 | |
| Protective earth contact | Without ground contact | |
| Rated current | 28 A | |
| Rated voltage for Ex e II applications | 440 V | |
| Connection technology | Push-in CAGE CLAMP® | |
| Conductor material | Copper | |
| Solid conductor cross-section | 0.5–4 mm² | |
| Solid conductor size | 20–12 AWG | |
| Solid conductor direct push-in range | 0.75–4 mm² | |
| Stranded conductor cross-section | 0.5–4 mm² | |
| Fine-stranded conductor cross-section | 0.5–4 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.5–1.5 mm² | |
| Conductor stripping length | 10–11 mm | |
| Wiring direction | Side-entry | |
| Pole spacing | 12 mm | |
| Overall height | 27.5 mm | |
| Height from mounting surface | 22.3 mm | |
| Mounting type | Screw mounting | |
| Mounting fastener | 3 mm diameter screw and nut (M3) | |
| Housing colour | Black | |
| Insulation material | Polyamide (PA66) | |
| Material group | I | |
| Flammability classification | UL94 V-0 | |
| Halogen-free | Yes | |
| Fire load | 0.383 MJ | |
| Weight | Approximately 20.5 g | |
| Manufacturer packaging unit | 250 pieces | |
| Packaging type | Bag | |
| Country of origin | Germany | |
| GTIN | 4045454789206 | |
| ETIM classification | EC001284 | |
| RoHS compliance | Compliant without exemption |
The WAGO 862-1503/999-950 is a three-pole chassis-mount terminal strip suitable for applicable Ex e II electrical equipment. It provides 12 conductor connection points across three electrical potentials, with four conductor connections per pole, and is designed for secure spring-pressure conductor termination.
Yes. WAGO identifies the 862-1503/999-950 as suitable for Ex e II applications. Its use in a hazardous area must comply with the relevant manufacturer documentation, certification conditions and installation standards. The terminal strip alone does not provide explosion protection for the complete equipment assembly.
The WAGO 862-1503/999-950 has a rated current of 28 A and a rated voltage of 440 V for Ex e II applications. The completed electrical assembly must remain within the applicable terminal, conductor and equipment ratings.
The terminal strip accepts 0.5–4 mm² solid, stranded and fine-stranded copper conductors. Direct push-in termination is specified for 0.75–4 mm² solid conductors. The specified stripping length is 10–11 mm, and conductor preparation must follow the manufacturer's requirements.
The WAGO 862-1503/999-950 is designed for screw mounting using 3 mm diameter M3 screw-and-nut fixings. It measures 36 mm wide, 22.3 mm high from the mounting surface and 35 mm deep. Although it has PE-N-L1 identification markings, WAGO specifies that this model is without a dedicated protective earth contact.
WAGO 862 Series chassis-mount terminal strips provide dependable spring-pressure connections for professional electrical equipment. The WAGO 862-1503/999-950 combines Ex e II application suitability, three independent electrical potentials, 12 conductor connection points, PE-N-L1 identification and Push-in CAGE CLAMP® technology to support organised and reliable wiring in appropriately designed industrial assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.