Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£6.94
The WAGO 769-106/021-002/034-9077/010-000 is a specialised 6-pole female plug-in terminal block connector belonging to the established WAGO X-COM® 769 series. Designed for modular electrical connections in industrial control panels, machinery and automation equipment, this connector is based on a proven connection platform using CAGE CLAMP® spring pressure technology for reliable, screwless conductor termination.
The WAGO 769-106 connector family features six independent conductor connection points, a compact 5 mm connection pitch and a nominal conductor cross-section of 4 mm². Its modular female plug-in interface supports detachable electrical assemblies, allowing machinery manufacturers and control panel builders to organise wiring efficiently and simplify equipment maintenance.
The closely related 769-106/021 locking-lever platform incorporates lateral locking levers and mechanical coding provisions to support secure engagement with compatible mating connectors. The extended 769-106/021-002/034-9077/010-000 manufacturer part number identifies a specific configuration within this product family. Its additional ordering suffixes must be considered when selecting the correct connector, particularly where mating geometry, coding or application-specific identification requirements are important.
The standard X-COM® 769 six-pole connector platform offers IEC ratings of 500 V and 32 A under specified conditions, together with a 6 kV rated impulse voltage. These characteristics make the connector family suitable for industrial electrical control and power connections where dependable spring pressure termination and convenient modular assembly are required.
The WAGO 769-106/021-002/034-9077/010-000 is based on the established X-COM® 769 electrical connection system. This platform uses CAGE CLAMP® spring pressure technology to provide dependable contact between copper conductors and the terminal contact system. Instead of relying on the tightening torque of a conventional screw terminal, the spring mechanism maintains electrical contact pressure through its mechanical design.
The standard six-pole connection platform accommodates solid and fine-stranded copper conductors from 0.08–4 mm², with a nominal cross-section of 4 mm². The usual conductor stripping length is 8–9 mm. A suitable operating tool opens the CAGE CLAMP® spring mechanism during conductor insertion or removal, supporting controlled wiring operations and reliable electrical termination.
The six-pole configuration provides six separate conductor connection points within a modular connector assembly. Its 5 mm pitch helps maintain compact dimensions and organised wiring, making the X-COM® system particularly useful in industrial control cabinets and machinery where available installation space must be used efficiently.
The corresponding WAGO 769-106/021 connector family incorporates a lateral locking-lever system designed to provide additional mechanical retention between female and male plug-in components. When the correct mating arrangement is used, this can help reduce unintended connector separation caused by machinery vibration, movement or handling during maintenance.
The standard locking-lever connector platform also features an integrated coding finger and supports variable mechanical coding. Coding is useful where electrical equipment contains several similar plug-in connections, as it can help distinguish designated mating positions and reduce installation errors.
The complete part number 769-106/021-002/034-9077/010-000 contains additional manufacturer configuration codes beyond the standard locking-lever connector designation. These codes identify a specific ordering variant, but their individual mechanical, colour, identification or coding functions are not established by the standard 769-106/021-000 specifications.
For this reason, the reference platform's locking, coding and dimensional details should be treated as family-level information rather than confirmation that every feature is identical on this specialised variant. When choosing a replacement, the full manufacturer part number and the mating component's configuration should be matched to ensure the correct connector is supplied.
WAGO X-COM® connectors are designed for modular electrical installations where convenient assembly and serviceability are important. Conductors can be terminated into compatible female connector assemblies during equipment manufacture, allowing wiring sections to be connected to appropriately configured male components during final installation.
This approach is particularly beneficial for OEM machine builders, control panel manufacturers and industrial maintenance engineers. It supports pre-assembled wiring harnesses, clearly organised electrical interfaces and efficient equipment servicing without repeatedly removing individual conductors from their spring pressure terminals.
The reference X-COM® 769 connector platform uses PA66 polyamide insulation with an UL94 V-0 flammability classification. These material properties support mechanical durability and electrical insulation in industrial applications. The suitability of the complete connector assembly must nevertheless be assessed against the installation's electrical ratings, environmental requirements and applicable regulations.
Important installation information: Under IEC/EN 61984, pluggable connectors without current-interrupting capability must not be connected or disconnected while energised or under load. The permissible ratings of the completed electrical connection depend on the exact connector variant, mating component, conductor selection and installation conditions.
| Manufacturer | WAGO |
|---|---|
| Product series | X-COM® 769 |
| Manufacturer part number | 769-106/021-002/034-9077/010-000 |
| Reference connector family | 769-106 |
| Reference locking-lever platform | 769-106/021 |
| Product category | Industrial pluggable terminal block connector |
| Connector type | Female plug-in connector |
| Contact type | Female socket |
| Number of poles | 6 |
| Connection arrangement | One conductor connection per pole |
| Number of conductor connection points | 6 |
| Number of electrical potentials | 6 |
| Connection technology | CAGE CLAMP® |
| Termination type | Screwless spring pressure connection |
| Actuation method | Operating tool |
| Nominal conductor cross-section | 4 mm² |
| Solid conductor range (reference platform) | 0.08–4 mm² |
| Fine-stranded conductor range (reference platform) | 0.08–4 mm² |
| Conductor size (reference platform) | 28–12 AWG |
| Connectable conductor material | Copper |
| Conductor stripping length (reference platform) | 8–9 mm |
| Pole spacing | 5 mm |
| Nominal module width | 5 mm |
| Rated voltage (IEC reference platform) | 500 V |
| Rated current (IEC reference platform) | 32 A |
| Rated impulse voltage (IEC reference platform) | 6 kV |
| Overvoltage category (reference platform) | III |
| Pollution degree (reference platform) | 3 |
| Connector orientation (reference platform) | Straight / in-line |
| Plug wire entry (reference platform) | 180° |
| Wiring direction (reference platform) | Front-entry wiring |
| Locking mechanism (769-106/021 family) | Lateral locking levers |
| Mechanical coding (reference platform) | Integrated coding finger |
| Variable coding (reference platform) | Supported |
| Anti-rotation protection (reference platform) | Yes |
| Reference connector width | 45 mm |
| Reference connector height | 45.2 mm |
| Reference connector depth | 18.3 mm |
| Reference dimensions (W × H × D) | 45 × 45.2 × 18.3 mm |
| Insulating material (reference platform) | Polyamide 66 (PA66) |
| Flammability classification (reference platform) | UL94 V-0 |
| Halogen-free insulating material (reference platform) | Yes |
| Marking provision (reference platform) | Side marking |
| Processing temperature (reference platform) | -35 to +85 °C |
| Continuous operating temperature (reference platform) | -60 to +105 °C |
| Connector system | WAGO X-COM® modular plug-in system |
| Installation arrangement | Plug-in connection with compatible mating components |
| Applicable connector standard (reference platform) | IEC/EN 61984 |
| Manufacturer configuration codes | /021-002, /034-9077 and /010-000 |
| Primary applications | Industrial control panels, machinery and automation equipment |
The WAGO 769-106/021-002/034-9077/010-000 is a specialised 6-pole female plug-in terminal block connector from the WAGO X-COM® 769 series. It is intended for modular electrical connections in industrial control panels, machinery and automation equipment, using the established CAGE CLAMP® spring pressure connection platform.
Both part numbers belong to the WAGO X-COM® 769 six-pole female connector family. The standard 769-106/021-000 features lateral locking levers, an integrated coding finger and a 5 mm connection pitch. The extended 769-106/021-002/034-9077/010-000 designation identifies a specific manufacturer configuration. Its additional suffixes may affect variant-specific features, so the two parts should not automatically be treated as interchangeable.
The corresponding WAGO X-COM® 769 reference platform has an IEC rated voltage of 500 V, a rated current of 32 A and a rated impulse voltage of 6 kV under overvoltage category III and pollution degree 3. The applicable electrical ratings of this specialised configuration and the completed connection depend on the exact variant, mating component and installation conditions.
The standard six-pole connector platform accommodates solid and fine-stranded copper conductors from 0.08–4 mm², corresponding to 28–12 AWG. The nominal conductor cross-section is 4 mm², and the standard stripping length is 8–9 mm. CAGE CLAMP® spring pressure technology provides the conductor termination.
The complete 769-106/021-002/034-9077/010-000 designation identifies a specific ordering configuration within the X-COM® connector family. Additional manufacturer suffixes can distinguish particular mechanical, coding or identification arrangements. Using the full part number helps ensure the correct replacement is selected and that the connector is compatible with the intended mating assembly.
WAGO X-COM® 769 series connectors provide established modular connection technology for industrial machinery, electrical control panels and automation systems. The WAGO 769-106/021-002/034-9077/010-000 belongs to this six-pole female connector family, combining the benefits of proven CAGE CLAMP® spring pressure conductor termination with a configurable plug-in connection system designed to support organised wiring, efficient equipment assembly and convenient maintenance.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.